TR236

TR236 High voltage fast-switching NPN power transistor Features ■ ■ ■ ■ High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed 3 1 2 Applications ■ ■ Electronic ballast for fluorescent lighting Electronic transformer for halogen lamps TO-220 Description The device is manufactured using high voltage Multi Epitaxial Planar technology for high switching speeds. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining a satisfactory RBSOA. Figure 1. Internal schematic diagram Table 1. Device summary Marking TR236 Package TO-220 Packaging Tube Oder code TR236 February 2008 Rev 2 1/9 www.st.com 9 Electrical ratings TR236 1 Electrical ratings Table 2. Symbol VCES VCEO VEBO IC ICM IB IBM Ptot Tstg TJ Absolute maximum rating Parameter Collector-emitter voltage (V BE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0, IB = 2 A, tp < 10 µs) Collector current (IC = 0) Collector peak current (tP < 5 ms) Base current Base peak current (tP < 5 ms) Total dissipation at Tc ≤ 25 °C Storage temperature Max. operating junction temperature Value 700 400 V(BR)EBO 4 8 2 4 70 -65 to 150 150 Unit V V V A A A A W °C °C 2/9 TR236 Electrical characteristics 2 Electrical characteristics (Tcase = 25 °C unless otherwise specified) Table 3. Symbol ICES Electrical characteristics Parameter Collector cut-off current (VBE = 0 ) Collector cut-off current (IB = 0 ) Emitter-base breakdown voltage (IC = 0) Test conditions VCE = 700 V VCE = 700 V VCE = 400 V IE = 10 mA 9 TC = 125 °C Min. Typ. Max. 0.1 0.5 0.25 Unit mA mA mA ICEO V(BR)EBO 18 V Collector-emitter VCEO(sus)(1) sustaining voltage (IB = 0) VCE(sat) (1) Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain IC = 10 mA IC = 0.8 A __ IB = 0.1 A IC = 2.5 A _ IB = 0.6 A IC = 1 A __ IB = 0.2 A IC = 2.5 A __ IB = 0.5 A IC = 10 mA IC = 2.5 A V CE = 5 V V CE = 5 V 400 V 1.1 1.3 1.2 1.3 10 8 28 V V V V VBE(sat) (1) hFE ts tf Inductive load Storage time Fall time VCC = 200 V IC = 2 A IB1 = 0.4 A RBB = 0 Ω (see Figure 2) V BE(off) = -5 V L = 200 µH 0.6 0.1 µs µs 1. Pulsed duration = 300ms, duty cycle ≤1.5% 3/9 Electrical characteristics TR236 2.1 Test circuits Figure 2. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier 4/9 TR236 Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 5/9 Package mechanical data TR236 TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 6/9 TR236 Package mechanical data TO-220 type E mechanical data DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 øP Q 4.98 1.17 6.10 2.52 12.70 3.20 15.21 3.73 2.59 mm. MIN. 4.47 0.70 1.17 0.31 14.60 9.96 2.54 5.08 5.18 1.37 6.80 2.82 13.80 3.96 16.77 3.94 2.89 TYP MAX. 4.67 0.91 1.37 0.53 15.70 10.36 7655923_B 7/9 Revision history TR236 4 Revision history Table 4. Date 08-Oct-2007 13-Feb-2008 Document revision history Revision 1 2 Initial release. Updated TO-220, type E, mechanical data Changes 8/9 TR236 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9