TRD136DT4

TRD136D High voltage fast-switching NPN power transistor Preliminary data Features ■ High voltage capability ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed ■ Integrated antiparallel collector-emitter diode 3 1 Applications TO-252 (DPAK) ■ Electronic ballast for fluorescent lighting ■ Electronic transformer for halogen lamps Description This device is an NPN power transistor manufactured using high voltage multi epitaxial planar technology for high switching speeds. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining a satisfactory RBSOA. Table 1. Figure 1. Internal schematic diagram Device summary Part number Marking Package Packaging TRD136DT4 TRD136D TO-252 Tape and reel June 2011 Doc ID 018979 Rev 1 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/12 www.st.com 12 Contents TRD136D Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 Doc ID 018979 Rev 1 TRD136D 1 Electrical ratings Electrical ratings Table 2. Absolute maximum rating Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 3 A Collector peak current (tP < 5ms) 6 A 1.5 A IC ICM IB Base current IBM Base peak current (tP < 5ms) 3 A Ptot Total dissipation at Tc ≤ 25°C 20 W Tstg Storage temperature -65 to 150 °C 150 °C TJ Max. operating junction temperature Doc ID 018979 Rev 1 3/12 Electrical characteristics 2 TRD136D Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Electrical characteristics Symbol Parameter Test conditions ICEV Collector cut-off current (VBE =-1.5V) IEBO Emitter cut-off current (IC =0) Collector-emitter VCEO(sus)(1) sustaining voltage (IB = 0) VCE(sat) (1) hFE ts tf VF VCE = 700 V TC = 100 °C VEB = 9 V IC = 10 mA _ IB = 0.1 A IC = 0.6 A _ _ IB = 60 mA Base-emitter saturation voltage DC current gain Inductive load Storage time Fall time _ IB = 0.5 A IC = 1 A __ IB = 0.2 A IC = 2 A _ Unit 1 5 mA mA 1 mA V IC = 0.5 A _ Collector-emitter saturation voltage Max. 400 _ _ IB = 0.5 A 0.5 0.7 1 V V V 1.2 1.6 V V IC = 10 mA VCE = 5 V 10 IC = 2 A VCE = 5 V 10 IC = 1 A IB1 = 0.2 A VBE(off) = -5 V RBB = 0 Ω 0.8 µs VClamp = 200 V L = 50 mH 0.16 µs 20 (see Figure 11) Diode forward voltage IF = 1 A 1. Pulsed duration = 300 ms, duty cycle ≤ 1.5% 4/12 Typ. VCE = 700 V IC = 2 A VBE(sat) (1) Min. Doc ID 018979 Rev 1 2.5 V TRD136D Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 5. DC current gain (VCE = 5 V) AM09994v1 Figure 4. DC current gain (VCE = 1 V) AM09996v1 Figure 6. Collector-emitter saturation voltage Figure 7. AM09998v1 Doc ID 018979 Rev 1 AM09997v1 Base-emitter saturation voltage AM09999v1 5/12 Electrical characteristics Figure 8. TRD136D Freewheel diode forward voltage Figure 9. AM10000v1 Figure 10. Reverse biased safe operating area 6/12 Doc ID 018979 Rev 1 Resistive load switching time TRD136D 2.2 Electrical characteristics Test circuits Figure 11. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier Doc ID 018979 Rev 1 7/12 Package mechanical data 3 TRD136D Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 8/12 Doc ID 018979 Rev 1 TRD136D Package mechanical data Table 4. DPAK (TO-252) mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 1.50 L1 2.80 L2 0.80 L4 0.60 R V2 1 0.20 0° 8° Doc ID 018979 Rev 1 9/12 Package mechanical data TRD136D Figure 12. DPAK (TO-252) drawing 0068772_H 10/12 Doc ID 018979 Rev 1 TRD136D 4 Revision history Revision history Table 5. Document revision history Date Revision 28-Jun-2011 1 Changes First release Doc ID 018979 Rev 1 11/12 TRD136D Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12 Doc ID 018979 Rev 1