TS4040DILT-2.5

TS4040 2.5V micropower shunt voltage reference Features ■ 2.5V output voltage ■ Ultra low current consumption: 40µA typ. ■ High precision @ 25°C: ±2% and ±1% ■ High stability when used with capacitive loads ■ Industrial temperature range:-40°C to +85°C ■ 150ppm/°C maximum temperature coefficient L SOT23-3L (Plastic micropackage) Applications ■ Computers ■ Instrumentation ■ Battery chargers ■ Switch mode power supply ■ Battery operated equipments Pin connections (Top view) Description The TS4040 is a low power shunt voltage reference providing a stable 2.5V output voltage over the industrial temperature range (-40°C to +85°C). Available in SOT23-3 surface mount package, it can be designed in applications where space saving is critical. The low operating current is a key advantage for power restricted designs. In addition, the TS4040 is very stable and can be used in a broad range of application conditions. August 2007 Rev 2 1/9 www.st.com 9 Absolute maximum ratings and operating conditions 1 TS4040 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings (AMR) Symbol Parameter Value Unit Ik Reverse breakdown current 20 mA If Forward current 10 mA 360 mW -65 to +150 °C 2 kV Machine model (MM) 200 V Lead temperature (soldering, 10 seconds) 260 °C (1) Pd Power dissipation Tstg Storage temperature ESD Human body model SOT23-3 (HBM)(2) (3) Tlead 1. Pd is calculated with Tamb = 25°C, Tjunction =150°C and Rthja = 340°C/W for the SOT23-3 package. 2. Human body model: 100pF discharged through a 1.5kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 3. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5Ω), done for all couples of pin combinations with other pins floating. Table 2. Symbol 2/9 Operating conditions Parameter Value Unit Ik-min Minimum operating current 65 μA Ik-max Maximum operating current 15 mA Toper Operating free air temperature range -40 to +85 °C TS4040 Electrical characteristics 2 Electrical characteristics Table 3. TS4040E (2% precision) Tamb = 25°C (1) (unless otherwise specified) Symbol Vk Ik-min ΔVref/ΔT ΔVk/ΔIk Parameter Test conditions Min. Typ. Max. Unit 2.5 2.55 V 50 74 mV Reverse breakdown voltage Ik = 100μA 2.45 Reverse breakdown voltage tolerance Ik = 100μA -40°C < Tamb < +85°C -50 -74 Minimum operating current T = 25°C -40°C < Tamb < +85°C 40 65 70 μA Average temperature coefficient Ik = 100μA 30 150 ppm/°C Ik-min < Ik < 1mA -40°C < Tamb < +85°C 0.4 1 1.2 1mA < Ik < 15mA -40°C < Tamb < +85°C 2.5 8 10 Ik = Ik-min to 1mA -40°C < Tamb < +85°C 0.4 1 1.2 Ik = 1 to 15mA -40°C < Tamb < +85°C 0.2 0.6 0.7 Reverse breakdown voltage change with operating current range mV Ω Rka Reverse static impedance Kvh Long term stability Ik = 100μA, t = 1000hrs 120 ppm En Wide band noise Ik = 100μA 10Hz < f < 10kHz 35 nV/√Hz 1. Limits are 100% production tested at 25°C. Behavior at the temperature range limits is guaranteed through correlation and by design. Table 4. Symbol TS4040D (1% precision) Tamb = 25°C (1) (unless otherwise specified) Parameter Test conditions Min. Typ. Max. Unit 2.475 2.5 2.525 V 25 49 mV Reverse breakdown voltage Ik = 100μA Reverse breakdown voltage tolerance Ik = 100μA -40°C < Tamb < +85°C Minimum operating current T = 25°C -40°C < Tamb < +85°C 40 65 70 μA ΔVref/ΔT Average temperature coefficient Ik = 100μA 30 150 ppm/°C ΔVk/ΔIk Ik-min < Ik < 1mA -40°C < Tamb < +85°C 0.4 Reverse breakdown voltage change with operating current range 1 1.2 Vk Ik-min -25 -49 mV 1mA < Ik < 15mA -40°C < Tamb < +85°C 2.5 8 10 Ik = Ik-min to 1mA -40°C < Tamb < +85°C 0.4 1 1.2 Ik = 1mA to 15mA -40°C < Tamb < +85°C 0.2 0.6 0.7 Ω Rka Reverse static impedance Kvh Long term stability Ik = 100μA, t = 1000hrs 120 ppm En Wide band noise Ik = 100μA 10Hz < f < 10kHz 35 nV/√Hz 1. Limits are 100% production tested at 25°C. Behavior at the temperature range limits is guaranteed through correlation and by design. 3/9 Electrical characteristics Figure 1. TS4040 Reference voltage versus cathode current Figure 2. Minimum operating current Reference voltage versus cathode current Minimum operating current 3 2.5 Cathode voltage (V) Cathode current (mA) 15 10 5 0 T=+25°C 2 T=+85°C 1.5 T=-40°C 1 0.5 0 -5 -0.5 0 0.5 1 1.5 2 0 2.5 20 Cathode voltage (V) Figure 3. 40 Cathode current (µA) Test circuit Figure 4. Reference voltage versus temperature 2.58 Test circuit +2% R Ik=(Vin-Vref)/R Vout=Vref Vin Cathode voltage (V) 2.56 2.54 +1% 2.52 2.5 2.48 -1% 2.46 -2% 2.44 2.42 -40 -20 0 20 40 60 80 Temperature (°C) Figure 5. Static impedance Rka versus temperature Figure 6. Noise voltage versus frequency Noise voltage versus Frequency Static impedance (Rka) versus temperature 1500 Noise voltage (nV/VHz) Static impedance (Ohms) 0.2 0.15 0.1 0.05 0 -40 CL=10µF 1000 CL=1µF 500 CL=100nF CL=0 0 -20 0 20 40 Temperature (°C) 4/9 CL=100µF 60 80 0.1 1000.0 10.0 1.0 100.0 Frequency (KHz) TS4040 Electrical characteristics Figure 7. Test circuit for pulse response at Ik=100µA Pulse response for Ik=100µA Figure 8. Pulse response for Ik=100µA Test circuit for pulse response at Ik=100µA 5 25k ohm Ik=100µA Intput Pulse Generator Output Input 0 2.5 Output 0 0 5 10 15 20 Time (µs) Figure 9. Test circuit for pulse response at Ik=100µA (detailed part) Figure 10. Test circuit for pulse response at Ik=100µA (detailed part) Pulse response for Ik=100µA Detailed part Pulse response for Ik=100µA Detailed part 5V 5V Input Input 0V 2.5V 0V 2.5V Output Output 0V 0V 0 0.5 1 1.5 2 0 1 2 Time (µs) 3 4 5 Time (µs) Figure 11. Test circuit for pulse response at Ik=1mA Figure 12. Pulse response at Ik=1mA Pulse response for Ik=1mA Test circuit for pulse response at Ik=1mA 5V 2.5k ohm Input Output Pulse Generator Intput Ik=1mA 0V 2.5V Output 0V 0 1 2 3 4 5 Time (µs) 5/9 Package information TS4040 Figure 13. Test circuit for pulse response at Ik=1mA (detailed part) Figure 14. Test circuit for pulse response at Ik=1mA (detailed part) Pulse response for Ik=1mA Detailed part Pulse response for Ik=1mA Detailed part 5V 5V Input Input 0V 2.5V 0V 2.5V Output Output 0V 0V 0 50 100 150 200 Time (ns) 3 0 0.2 0.4 0.6 Time (µs) 0.8 1 Package information In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: www.st.com. 6/9 TS4040 Package information Figure 15. SOT23-3 package mechanical data Dimensions Ref. Millimeters Min. Typ. Mils Max. Min. Typ. Max. A 0.890 1.120 35.05 44.12 A1 0.010 0.100 0.39 3.94 A2 0.880 1.020 34.65 b 0.300 0.500 11.81 19.69 C 0.080 0.200 3.15 7.88 D 2.800 3.040 110.26 E 2.100 2.64 82.70 E1 1.200 1.400 47.26 0.950 2.900 1.300 37.41 114.17 51.19 0.950 37.41 e1 1.900 74.82 0.400 L1 k 0.600 15.75 0.540 0° 119.72 103.96 e L 40.17 55.13 23.63 21.27 8° 0° 8° 7110469/A 7/9 Ordering information 4 TS4040 Ordering information Table 5. Order codes Part number Precision TS4040EILT-2.5 2% TS4040DILT-2.5 5 Package Packing -40°C to +85°C SOT23-3 Tape & reel Marking L243 1% L242 Revision history Table 6. 8/9 Temperature range Document revision history Date Revision Changes 14-Mar-2002 1 Initial release. 20-Aug-2007 2 Removed TO-92 package information. Format update. TS4040 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9