TS420-700T

TS420 Sensitive gate 4 A SCRs Datasheet - production data Description Thanks to highly sensitive triggering levels, the device is suitable for all applications where the available gate current is limited, such as motor control for hand tools, kitchen aids, overvoltage crowbar protection for low power supplies among others. Available in through-hole and surface-mount packages, they provide an optimized performance in a limited space area. Table 1: Device summary Order code TS420-600B Features    On-state RMS current: 4 A Repetitive peak off-state voltage (VDRM, VRRM) 600 V Triggering gate current, IGT 0.2 mA October 2017 Sensitivity TS420-600H TS420-600T DocID5203 Rev 6 This is information on a product in full production. Package DPAK 0.2 mA IPAK TO-220AB 1/14 www.st.com Characteristics 1 TS420 Characteristics Table 2: Absolute ratings (limiting values) Symbol Parameter Value Unit IT(RMS) RMS on-state current (180 ° conduction angle) TC = 115°C 4 A IT(AV) Average on-state current (180 ° conduction angle) TC = 115°C 2.5 A ITSM Non repetitive surge peak on-state current tp = 8.3 ms I2t value for fusing tp = 10 ms Tj = 25 °C 4.5 A2s dl/dt Critical rate of rise of on-state current IG = 10 mA, dlG / dt = 0.1 A/µs f = 60 Hz Tj = 125 °C 50 A/µs IGM Peak gate current tp = 20 µs 1.2 A 0.2 W I2 t tp = 10 ms Tj initial = 25 °C 33 30 A PG(AV) Average gate power dissipation VRGM Maximum peak reverse gate voltage 5 V Tstg Storage junction temperature range -40 to +150 °C Maximum operating junction temperature -40 to +125 °C Value Unit Tj Table 3: Device timings Symbol tGT tQ 2/14 Parameter Test conditions Gate controlled turn on time ITM = 10 A, Tj = 25 °C, VD = VDRM(max.), IGT = 10 mA, dIG/dt = 0.2 A/μs, RG = 1 kΩ Circuit controlled turn off time ITM = 8 A, Tj = 125 °C, VD = 67% VDRM(max.), VR = 10 V, dIT/dt = 10 A/μs, dVD/dt = 2 V/μs, RG = 1 kΩ DocID5203 Rev 6 0.5 (typ.) µs 60 (typ.) TS420 Characteristics Table 4: Electrical characteristics (Tj = 25 °C unless otherwise specified) Symbol IGT VGT VGD Test Conditions VD = 12 V, RL = 33 Ω VD = VDRM, RL = 33 kΩ, RGK = 220 Ω Tj = 125 °C Value Unit Max. 200 µA Max. 0.8 V Min. 0.1 V IH IT = 50 mA, RGK = 1 kΩ Max. 5 mA IL IG = 2 mA, RGK = 1 kΩ Max. 6 mA dV/dt VD = 67 % VDRM, RGK = 220 Ω Tj = 125 °C Min. 5 V/µs VTM ITM = 8 A, tP = 380 µs Tj = 25 °C Max. 1.6 V VT0 Threshold voltage Tj = 125 °C Max. 0.85 V RD Dynamic resistance Tj = 125 °C Max. 90 mΩ 5 µA 1 mA IDRM IRRM Tj = 25 °C VD = VR =VDRM = VRRM; RGK = 220 Ω Tj = 125 °C Max. Table 5: Thermal parameters Symbol Rth(j-c) Parameter Junction to case (DC) Unit 3.0 S(1) Rth(j-a) Value = 0.5 cm² Junction to ambient (DC) DPAK 70 IPAK 100 TO-220AB 60 °C/W Notes: (1) Copper surface under tab DocID5203 Rev 6 3/14 Characteristics 1.1 4/14 TS420 Characteristics (curves) Figure 1: Maximum average power dissipation versus average on-state current Figure 2: Average and DC on-state current versus case temperature Figure 3: Average and D.C. on state current versus ambient temperature (DPAK) Figure 4: Relative variation of thermal impedance junction to ambient versus pulse duration (DPAK) Figure 5: Relative variation of gate trigger current and holding current versus junction temperature Figure 6: Relative variation of holding current versus gate-cathode resistance (typical values) DocID5203 Rev 6 TS420 Characteristics Figure 7: Relative variation of dV/dt immunity versus gate-cathode resistance (typical values) Figure 8: Relative variation of dV/dt immunity versus gate-cathode capacitance (typical values) Figure 9: Surge peak on-state current versus number of cycles Figure 10: Non-repetitive surge peak on-state current Figure 11: On-state characteristics (maximum values) Figure 12: Thermal resistance junction to ambient versus copper surface under tab DocID5203 Rev 6 5/14 Package information 2 TS420 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.    2.1 Epoxy meets UL 94,V0 Lead-free packages Recommended torque value: 0.4 to 0.6 N·m DPAK package information A Figure 13: DPAK package outline E b4 H D D1 L2 c2 e L4 A1 b E1 c A2 L V2 e1 This package drawing may slightly differ from the physical package. However, all the specified dimensions are guaranteed. 6/14 DocID5203 Rev 6 Package information TS420 Table 6: DPAK package mechanical data Dimensions Ref. Inches(1) Millimeters Min. Typ. Max. Min. Typ. Max. A 2.18 2.40 0.0858 0.0945 A1 0.90 1.10 0.0354 0.0433 A2 0.03 0.23 0.0012 0.0091 b 0.64 0.90 0.0252 0.354 b4 4.95 5.46 0.1949 0.2150 c 0.46 0.61 0.0181 0.0240 c2 0.46 0.60 0.0181 0.0236 D 5.97 6.22 0.2350 0.2449 D1 5.10 E 6.35 E1 4.32 0.2007 6.73 0.2500 0.2650 0.1701 e 2.29 0.0900 e1 4.57 0.1800 H 9.35 10.40 0.3681 0.4094 L 1.00 1.78 0.0394 0.0701 L2 1.27 0.0500 L4 0.60 1.02 0.0236 0.0402 V2 0° +8° 0° +8° Notes: (1)Dimensions in inches are given for reference only Figure 14: DPAK recommended footprint (dimensions are in mm) DocID5203 Rev 6 7/14 Package information 2.2 TS420 IPAK package information Figure 15: IPAK package outline This package drawing may slightly differ from the physical package. However, all the specified dimensions are guaranteed. 8/14 DocID5203 Rev 6 Package information TS420 Table 7: IPAK package mechanical data Dimensions Ref. Inches(1) Millimeters Min. Typ. Max. Min. Typ. Max. A 2.20 2.40 0.0866 0.0945 A1 0.90 1.10 0.0354 0.0433 b 0.64 0.90 0.0252 0.0354 b2 0.95 b4 5.20 B5 5.43 0.0374 0.2047 0.30 0.2138 0.0118 c 0.45 0.60 0.0177 0.0236 c2 0.46 0.60 0.0181 0.0236 D 6.00 6.20 0.2362 0.2441 E 6.40 6.65 0.2520 0.2618 e 2.28 e1 0.0898 4.40 H 4.60 0.1732 16.10 0.1811 0.6339 L 9.00 9.60 0.3545 0.3780 L1 0.80 1.20 0.0315 0.0472 L2 0.80 V1 10° 1.25 0.0315 0.0492 10° Notes: (1)Inch dimensions are for reference only. DocID5203 Rev 6 9/14 Package information 2.3 TS420 TO-220AB package information Figure 16: TO-220AB package outline 10/14 DocID5203 Rev 6 Package information TS420 Table 8: TO-220AB package mechanical data Dimensions Ref. Inches(1) Millimeters Min. Max. Min. Max. A 4.40 4.60 0.1732 0.1811 b 0.61 0.88 0.0240 0.0346 b1 1.14 1.55 0.0449 0.0610 c 0.48 0.70 0.0189 0.0276 D 15.25 15.75 0.6004 0.6201 D1 1.27 typ. 0.0500 typ. E 10.00 10.40 0.3937 0.4094 e 2.40 2.70 0.0945 0.1063 e1 4.95 5.15 0.1949 0.2028 F 1.23 1.32 0.0484 0.0520 H1 6.20 6.60 0.2441 0.2598 J1 2.40 2.72 0.0945 0.1071 L 13.00 14.00 0.5118 0.5512 L1 3.50 3.93 0.1378 0.1547 L20 16.40 typ. 0.6457 typ. L30 28.90 typ. 1.1378 typ. ØP 3.75 3.85 0.1476 0.1516 Q 2.65 2.95 0.1043 0.1161 Notes: (1)Inch dimensions are for reference only. DocID5203 Rev 6 11/14 Ordering information 3 TS420 Ordering information Figure 17: Ordering information scheme Table 9: Ordering information 12/14 Order code Marking Package Weight DPAK 0.3 g TS420-600B TS420600 TS420-600B-TR TS420600 TS420-600H TS420600 IPAK TS420-600T TS420600T TO-220AB DocID5203 Rev 6 Base qty. Delivery mode 75 Tube 2500 Tape and reel 0.4 g 75 Tube 2.3 g 50 Tube Revision history TS420 4 Revision history Table 10: Document revision history Date Revision Changes Sep-2000 3 Previous release. 26-Jan-2010 4 Updated package illustration for TO-220AB on front page and Table 8. Added Table 5. 28-May-2014 5 Updated DPAK package information and reformatted to current standard. 10-May-2016 6 Updated cover page. Updated Table 4: "Electrical characteristics (Tj = 25 °C unless otherwise specified)", Figure 10: "Non-repetitive surge peak on-state current " and Table 9: "Ordering information". Complete update of Package information section. 10-Oct-2017 7 Updated DPAK and D²PAK package information. DocID5203 Rev 6 13/14 TS420 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2017 STMicroelectronics – All rights reserved 14/14 DocID5203 Rev 6