TS462CD

® TS461 TS462 TS464 OUTPUT RAIL TO RAIL OPERATIONAL AMPLIFIERS PIN CONNECTIONS (top view) TS461CLT . . . . . . HIGH DYNAMIC FEATURES LARGE OUTPUT SWING (±2.4V @ VCC = ±2.5V) LOW NOISE LEVEL : 4nV/√Hz   LOW DISTORTION : 0.003% OPERATING RANGE : 2.7V to 12V AVAILABLE IN SOT23-5 MICROPACKAGE Output 1 5 VCC VDD Non-inverting input 2 DESCRIPTION The TS46x is operational amplifiers able to operate with voltages as low as ±1.35V and to reach a minimum of ±2Vpp of output swing when supplied with ±2.5V. This device is well suited for every kind of portable and battery-supplied equipment where low noise and low distortion are key. The TS461/2/4 are a cost-attractive access to the range of the Rail to Rail Op-Amps from STMicroelectonics. 3 4 Inverting input TS461CD N. C. 1 + 8 N.C. 7 VC C 6 Output 2 5 N.C . Inverting Input 1 2 Non -inverting Input 1 3 VDD 4 . . . . . . APPLICATIONS Sound cards PDA CD players Recording equipments Multimedia Microphone preamplifier TS462CN-TS462CD-TS462CPT Output 1 Inve rting Inp ut 1 Non-inve rting Inp ut 1 1 2 3 + + 8 VCC 7 Output 2 6 Inverting Input 2 5 Non-inverting Input 2 VDD 4 ORDER CODES Part Temperature Number Range TS461C TS462C TS464C -20, +70 C -20, +70oC -20, +70 C o o Package N • • D • • • • • P L • SOT23 Marking K105 TS464CN-TS464CD-TS464CPT Output 1 1 Inverting Input 1 2 + + 14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VDD + + 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3 N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape & Reel (PT) L = Tiny Package (SOT23-5) - only available in Tape & Reel (LT) Non-inverting Input 1 3 VC C 4 Non-inverting Input 2 5 Inve rting Input 2 6 Output 2 7 August 1999 1/10 TS461-TS461-TS464 ABSOLUTE MAXIMUM RATINGS Symbol VCC Vid Vin Toper Tstg Tj R thjc Supply Voltage - note 1 Differential Input Voltage - note 2 Input Voltage Range - note 3 Operating Free Air Temperature Range Storage Temperature Maximum Junction Temperature Thermal Resistance Junction to Case - note 4 SOT23-5 SO8 SO14 TSSOP8 TSSOP14 Thermal Resistance Junction to Ambient Human Body Model Lead Temperature (soldering, 10sec) Notes : 1. 2. 3. 4. All voltages values, except differential voltage are with respect to network ground terminal. Differential voltages are non-inverting input terminal with respect to the inverting input terminal. The magniture of input and output voltages must never exceed VCC +0.3V. Short-circuits can cause excessive heating and destructive dissipation. Parameter Value 12 ±VCC -0.3 to 12.3 -20 to +70 -65 to +150 150 Unit V V V o o o o C C C C/W 81 28 22 26 21 256 2 260 o Rthja ESD (SOT23-5) C/W kV o C OPERATING CONDITIONS Symbol VCC Vicm Supply Voltage Range Common Mode Input Voltage Range Parameter Value 2.7 to 10 VDD + 1.15 to VCC - 1.15 Unit V V 2/10 TS461-TS462-TS464 ELECTRICAL CHARACTERISTICS VCC = 2.5V, VDD = -2.5V, Tamb = 25oC (unless otherwise specified) Symbol Vio DVio Iio Input Offset Voltage Tmin. < Tamb < Tmax. Input Offset Voltage Drift Vicm = 0V, Vo = 0V Input Offset Current Vicm = 0V, Vo = 0V Tmin. < Tamb < Tmax. Input Bias Current Vicm = 0V, Vo = 0V Tmin. < Tamb < Tmax. Common Mode Input Voltage Range Common Mode Rejection Ratio Vicm = ±1.35V Supply Voltage Rejection Ratio VCC = ±2V to ±3V Large Signal Voltage Gain High Level Output Voltage Low Level Output Voltage Supply Current, per amplifier Unity gain - no load Gain Bandwidth Product f = 100kHz Slew Rate AV = 1, Vin = ±1V Equivalent Input Noise Voltage f = 100kHz Total Harmonic Distortion f = 1kHz, AV = -1 R L = 10kΩ R L = 2kΩ, CL = 100pF 8.5 2.8 R L = 2kΩ R L = 2kΩ R L = 2kΩ -1.35 60 60 70 2 Parameter Min. Typ. 1 5 10 150 200 nA 200 200 ±1.5 85 dB 70 80 2.4 -2.4 2 10 4 4 0.003 V/µs nV  Hz √ % -2 2.8 MHz dB V V mA 750 1000 1.35 V dB µV/ C nA o Max. 5 Unit mV Iib Vicm CMR SVR Avd VOH VOL ICC GBP SR en THD 3/10 TS461-TS461-TS464 TS462CN PACKAGE MECHANICAL DATA 8 PINS - PLASTIC DIP Dimensions A a1 B b b1 D E e e3 e4 F i L Z Min. 0.51 1.15 0.356 0.204 7.95 Millimeters Typ. 3.32 Max. Min. 0.020 0.045 0.014 0.008 0.313 Inches Typ. 0.131 Max. 1.65 0.55 0.304 10.92 9.75 2.54 7.62 7.62 6.6 5.08 3.81 1.52 0.065 0.022 0.012 0.430 0.384 0.100 0.300 0.300 0260 0.200 0.150 0.060 3.18 0.125 4/10 TS461-TS462-TS464 TS461CD-TS462CD PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Dimensions A a1 a2 a3 b b1 C c1 D E e e3 F L M S Min. 0.1 0.65 0.35 0.19 0.25 4.8 5.8 Millimeters Typ. Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45 (typ.) 5.0 6.2 o Min. 0.004 0.026 0.014 0.007 0.010 0.189 0.228 Inches Typ. Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.197 0.244 1.27 3.81 3.8 0.4 4.0 1.27 0.6 8 (max.) o 0.050 0.150 0.150 0.016 0.157 0.050 0.024 5/10 TS461-TS461-TS464 TS462CPT PACKAGE MECHANICAL DATA 8 PINS - THIN SHRINK SMALL OUTLINE PACKAGE (TSSOP) Dim. A A1 A2 b c D E E1 e k l Min. 0.05 0.80 0.19 0.09 2.90 4.30 0o 0.50 Millimeters Typ. 1.00 3.00 6.40 4.40 0.65 0.60 Max. 1.20 0.15 1.05 0.30 0.20 3.10 4.50 8o 0.75 Min. 0.01 0.031 0.007 0.003 0.114 0.169 0o 0.09 Inches Typ. 0.039 0.118 0.252 0.173 0.025 0.0236 Max. 0.05 0.006 0.041 0.15 0.012 0.122 0.177 8o 0.030 6/10 TS461-TS462-TS464 TS464CN PACKAGE MECHANICAL DATA 14 PINS - PLASTIC DIP Dim. a1 B b b1 D E e e3 F i L Z Min. 0.51 1.39 Millimeters Typ. Max. 1.65 Min. 0.020 0.055 Inches Typ. Max. 0.065 0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 1.27 2.54 0.050 0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100 7/10 TS461-TS461-TS464 TS464CD PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO) Dim. A a1 a2 b b1 C c1 D E e e3 F G L M S Min. 0.1 0.35 0.19 Millimeters Typ. Max. 1.75 0.2 1.6 0.46 0.25 45o (typ.) Min. 0.004 0.014 0.007 Inches Typ. Max. 0.069 0.008 0.063 0.018 0.010 0.5 8.55 5.8 1.27 7.62 3.8 4.6 0.5 4.0 5.3 1.27 0.68 8 (max.) o 0.020 8.75 6.2 0.336 0.228 0.050 0.300 0.150 0.181 0.020 0.157 0.208 0.050 0.027 0.334 0.244 8/10 TS461-TS462-TS464 TS464CPT PACKAGE MECHANICAL DATA 14 PINS - THIN SHRINK SMALL OUTLINE PACKAGE (TSSOP) Dim. A A1 A2 b c D E E1 e k l Min. 0.05 0.80 0.19 0.09 4.90 4.30 0o 0.50 Millimeters Typ. 1.00 5.00 6.40 4.40 0.65 0.60 Max. 1.20 0.15 1.05 0.30 0.20 5.10 4.50 8o 0.75 Min. 0.01 0.031 0.007 0.003 0.192 0.169 0o 0.09 Inches Typ. 0.039 0.196 0.252 0.173 0.025 0.0236 Max. 0.05 0.006 0.041 0.15 0.012 0.20 0.177 8o 0.030 9/10 TS461-TS461-TS464 TS461CLT PACKAGE MECHANICAL DATA 5 PINS -TINY PACKAGE (SOT23) A E A2 D b A1 E1 C L Dim. A A1 A2 b C D E E1 L Millimeters Min. 0.90 0 0.90 0.35 0.09 2.80 2.60 1.50 0.10 Max. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 0.60 Min. 0.034 0.034 0.013 0.003 0.110 0.102 0.059 0.003 Inches Max. 0.057 0.006 0.051 0.020 0.008 0.118 0.118 0.069 0.024 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this pub lication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a trademark of STMicroelectronics © 1999 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. © http://www.st.com 10/10