TS514IYD

TS514 / TS514A Precision Quad Operational Amplifier ■ ■ ■ ■ ■ ■ ■ ■ Low input offset voltage: 500µV max. Low power consumption. Short circuit protection. Low distortion, low noise. High gain-bandwidth product. High channel separation. ESD protection 2kV. Macromodel included in this specification. D SO-14 (Plastic Micropackage) N DIP14 (Plastic Package) Description The TS514 is a high-performance quad operational amplifier with frequency and phase compensation built into the chip. The internal phase compensation allows stable operation as a voltage follower in spite of its high gain-bandwidth product. The circuit presents very stable electrical characteristics over the entire supply voltage range, and is particularly intended for professional and telecom applications (active filter, etc.). Pin Connections (top view) Output 1 Inverting Input 1 Non-inverting Input 1 V CC + Non-inverting Input 2 Inverting Input 2 Output 2 1 2 3 4 5 6 7 + + + + 14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3 Order Codes Part Number TS514IN TS514AIN TS514ID/IDT TS514AID/AIDT TS514IYD/IYDT TS514AIYD/AIYDT Temperature Range Package DIP14 -40, + 125°C SO-14 SO14 (automotive grade level) Packing Tube Tube or Tape & Reel Marking 514IN 514AIN 514I 514AI 514IY 514AIY September 2005 Rev. 3 1/10 www.st.com 10 Absolute Maximum Ratings TS514 / TS514A 1 Absolute Maximum Ratings Table 1. Symbol VCC Vi Vid(1) ptot Tstg Rthja Supply Voltage Input Voltage Positive Negative Differential Input Voltage Power Dissipation at Tamb = 70°C (2) Storage Temperature Range Thermal Resistance Junction to Ambient SO14 DIP14 HBM: Human Body Model(3) ESD MM: Machine Model(4) CDM: Charged Device Model 1. Differential voltages are with respect to the midpoint between Vcc+ and Vcc-. 2. Power dissipation must be considered to ensure maximum junction temperature (Tj) is not exceeded. 3. Human body model, 100pF discharged through a 1.5kΩ resistor into pin of device. 4. Machine model ESD, a 200pF cap is charged to the specified voltage, then discharged directly into the IC with no external series resistor (internal resistor < 5Ω), into pin to pin of device. Key parameters and their absolute maximum ratings Parameter Value ±18 +VCC -Vcc - 0.5 ±(VCC - 1) 400 -65 to +150 Unit V V V mW °C 103 66 2