TS931ILT

TS931 TS932 TS934 OUTPUT RAIL TO RAIL MICROPOWER OPERATIONAL AMPLIFIERS s s s s s s s s s RAIL TO RAIL OUTPUT VOLTAGE SWING MICROPOWER CONSUMPTION (20 µA) SINGLE SUPPLY OPERATION (2.7V to 10V LOW OFFSET (2mV max for TS93xB) CMOS INPUTS ULTRA LOW INPUT BIAS CURRENT (1pA) ESD PROTECTION (2kV) LATCH-UP IMMUNITY (Class A) AVAILABLE IN SOT23-5 MICROPACKAGE PIN CONNECTIONS (top view) TS931ILT Output 1 5 VCC VDD Non-inverting input 2 3 4 Inverting input DESCRIPTION The TS93x (Single, Dual & Quad) is Operational Amplifier able to operate with voltage as low as 2.7V and to reach 2.9Vpp of output swing with RL = 100kΩ when supplied @ 3V. Offering a typical consumption of only 20µA, it is particularly well-suited for every kind of battery-supplied applications. The TS93x is housed in the space-saving 5 pins SOT23-5 package which simplifies the board design because of the ability to be placed everywhere (outside dimensions are : 2.8mm x 2.9mm). APPLICATION TS931ID-TS931IDT N.C. Inve rting Inp u t 1 No n-inve rting Inp ut 1 1 2 3 + 8 N.C. 7 VCC 6 Output 2 5 N.C. V DD 4 TS932IN-TS932ID-TS932IDT s s s s s s Battery-powered systems Portable communication systems Alarm, smoke detectors Instrumentation & sensoring PH Meter Digital scales Output 1 Inve rting Inp ut 1 Non-inve rting Inp ut 1 1 2 3 + + 8 VCC 7 Output 2 6 Inve rting Input 2 5 Non-inve rting Inp ut 2 VDD 4 ORDER CODE Part Number TS931I TS931A/BI TS932I TS932A/BI TS934I TS934A/BI Temperature Range -40, +85° C -40, +85° C -40, +85° C • • • • Package NDP • • • • • • L • • SOT23 Marking K205 K206/207 TS934IN-TS934ID-TS934IDT-TS934IPT Ou tpu t 1 1 Inve rting Inpu t 1 2 Non-inve rting Inpu t 1 3 VCC 4 + + 14 Outp u t 4 13 Inve rting Inpu t 4 12 Non-inve rting Inpu t 4 11 VDD + + 10 Non-inve rting Inpu t 3 9 8 Inve rting Inpu t 3 Outp u t 3 • • Non -inve rting Inp ut 2 5 Inve rting Inp ut 2 6 Ou tpu t 2 7 N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT) P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape & Reel (PT) L = Tiny Package (SOT23-5) - only available in Tape & Reel (LT) May 2000 1/14 T S931-TS932-TS934 ABSOLUTE MAXIMUM RATINGS Symbol VCC Vid Vin Toper Tstd Tj Rthjc Supply voltage 1) Differential Input Voltage Input Voltage Range 3) 2) Parameter Value 12 ± 12 -0.3 to 12.3 -40 to + 85 -65 to +150 150 Unit V V V °C °C °C °C/W Operating Free Air Temperature Range Storage Temperature Range Maximum Junction Temperature Thermal Resistance Junction to Case SOT23-5 DIP8 DIP14 SO8 SO14 TSSOP8 TSSOP14 Human Body Model Latch-up Immunity Lead Temperature (soldering, 10sec) 4) 81 42 32 28 22 26 21 256 2 Class A 260 °C/W kV °C R thja ESD Thermal Resistance Junction to Ambient - SOT23-5 1. All voltages values, except differential voltage are with respect to network terminal. 2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal. 3. The magnitude of input and output voltages must never exceed VCC +0.3V. 4. Short-circuits can cause excessive heating and destructive dissipation. OPERATING CONDITIONS Symbol VCC Vicm Supply Voltage Common Mode Input Voltage Range Parameter Value 2.7 to 10 V ee - 0.2 to VCC - 1.5 Unit V V 2/14 TS931-TS932-TS934 ELECTRICAL CHARACTERISTICS VCC = +3V, Vee = 0V, Tamb = 25°C (unless otherwise specified) Symbol Input Offset Voltage Vio ∆Vio Iio Iib CMR SVR Avd TS931/2/4 TS931/2/4A TS931/2/4B Input Offset Voltage Drift Input Offset Current 1) Input Bias Current 1) Common Mode Rejection Ratio 0 ≤ Vicm ≤ VCC - 1.7 Supply Voltage Rejection Ratio 2) Large Signal Voltage Gain V O = 2Vpp High Level Output Voltage V ID = 100mV Low Level Output Voltage V ID = -100mV R L = 1MΩ R L = 100kΩ R L = 100kΩ R L = 100kΩ 1.5 1.5 20 RL = 100kΩ, CL = 50pF RL = 100kΩ, CL = 50pF CL = 50pF 100 50 65 75 31 µA kHz V/ms Degrees nV/ √Hz 2.95 50 3 1 1 85 85 120 106 100 150 10 5 2 mV µV/° C pA pA dB dB dB Parameter Min. Typ. Max. Unit VOH VOL V mV Io Output Source Current V ID = 100mV, VO = VDD Output Sink Current V ID = -100mV, V O = VCC Supply Current (per amplifier) A VCL = 1, no load Gain Bandwith Product Slew Rate Phase Margin Input Voltage Noise mA ICC GBP SR φm en 1. Maximum values including unavoidable inaccurates of the industrial test. 2. VCC has a 0.2V variation. 3/14 T S931-TS932-TS934 ELECTRICAL CHARACTERISTICS VCC = +5V, Vee = 0V, Tamb = 25°C (unless otherwise specified) Symbol Input Offset Voltage Vio ∆Vio Iio Iib CMR SVR Avd TS931/2/4 TS931/2/4A TS931/2/4B Input Offset Voltage Drift Input Offset Current 1) Input Bias Current 1) Common Mode Rejection Ratio 0 ≤ Vicm ≤ VCC - 1.7 Supply Voltage Rejection Ratio 2) Large Signal Voltage Gain V O = 4Vpp High Level Output Voltage V ID = 100mV Low Level Output Voltage V ID = -100mV R L = 1MΩ R L = 100kΩ R L = 100kΩ R L = 100kΩ 5 5 20 RL = 100KΩ, CL = 50pF RL = 100KΩ, CL = 50pF CL = 50pF 100 50 65 76 33 µA kHz V/ms Degrees nV/ √Hz 4.95 50 3 1 1 85 85 120 112 100 150 10 5 2 mV µV/° C pA pA dB dB dB Parameter Min. Typ. Max. Unit VOH VOL V mV Io Output Source Current V ID = 100mV, VO = VDD Output Sink Current V ID = -100mV, V O = VCC Supply Current (per amplifier) A VCL = 1, no load Gain Bandwith Product Slew Rate Phase Margin Input Voltage Noise mA ICC GBP SR φm en 1. Maximum values including unavoidable inaccurates of the industrial test. 2. VCC has a 0.2V variation. 4/14 TS931-TS932-TS934 20 50 18 Tamb=25°C T amb=25 °C 16 Input Offset Voltage Drift (µV) Vcc=5V 0 Supply Current (µA) 14 12 10 8 6 4 2 -50 -100 -150 -40 0 -20 0 20 40 60 80 0 2 4 Temperature (°C) 6 8 SupplyVoltage (V) 10 12 12 Vid=-100mV 10 Vid=+100mV 8 Supply Current (µA) Supply Current (µA) 21 Vcc from 2.7V to 10V 20 19 6 Tamb=25°C T amb=25 °C 18 4 17 2 16 -40 0 0 2 4 6 8 SupplyVoltage (V) 10 12 -20 0 20 40 60 80 Temperature (°C) 6 Output Short-Circuit Current (mA) 4 2 0 -2 -4 -6 -40 -20 0 20 Isink,Vcc=5V 30 Output Short-Circuit Current (mA) Tamb=25 °C 20 Sink 10 Isink,Vcc=3V Isource,Vcc=3V 0 -10 Source -20 Isource,Vcc=5V 40 60 80 -30 2 4 6 SupplyVoltage (V) 8 10 Temperature (°C) 5/14 T S931-TS932-TS934 1 Output Shor t-Circuit Current (mA) Sink 0.5 T=-40°C Output Short-Circuit Current (mA) T=+25°C T=+85°C Sink 1 T=-40°C T=+25°C T=+85°C 0 0 Vcc=2.7V -0.5 -1 Vcc=3V -1 T=+85°C T=+25°C -2 T=-40°C T=+85°C T=+25°C T=-40°C -1.5 Source 1 Output Voltage (V) 2 3 Source 1 1.5 2 Output Voltage (V) 2.5 3 -2 0 0 0.5 T=-40°C Output Short-Circuit Current (mA) 30 Output Short-Circuit Current (mA) T=-40°C 6 Sink 4 2 T=+25°C T=+85°C Sink 20 10 T=+25°C T=+85°C Vcc=5V 0 -2 T=+85°C -4 -6 0 1 T=+25°C T=-40°C 2 3 Output Voltage (V) 4 Vcc=10V 0 -10 T=+85°C T=+25°C T=-40°C -20 Source 5 Source 2 4 6 8 10 Output Voltage (V) -30 0 500 RL = 10k Ω Voltage referenced to Vcc (mV) Voltage referenced to VDD (mV) 200 100 50 20 10 5 RL = 1M Ω 2 1 2 4 6 Supply Voltage (V) 8 10 RL tied to VDD SINGLE SUPPLY Vid = +100mV RL = 100k Ω 500 200 100 50 20 10 5 2 1 2 4 6 Supply Voltage (V) 8 10 RL = 1M Ω RL tied to Vcc SINGLE SUPPLY Vid = -100mV RL = 100k Ω RL = 10k Ω 6/14 TS931-TS932-TS934 70 RL = 100k 60 50 CL = 50 pF Vcc = 3V & 5V 180 160 140 Phase (° ) 70 RL = 100k 60 50 40 CL = 100 pF Vcc = 3V & 5V 180 160 140 Phase (° ) 120 Gain (dB) 30 Gain 20 10 Phase 100 80 60 Gain (dB) 40 120 30 20 10 0 Gain Phase 100 80 60 40 0 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 Frequency (Hz) Frequency (Hz) 1 2 RL=100k Gain = +2 F = 100Hz 1.5 Distortion (%) 0.8 RL=100k Gain = +2 Distortion (%) 0.6 Vcc=5V Vo=4Vpp 0.4 Vcc=3V Vo=2Vpp Vcc=3V 1 Vcc=5V 0.2 0.5 0 20 50 100 200 500 1,000 2,000 5,000 10,000 Frequency (Hz) 0 1 2 3 Output Voltage (Vpp) 4 5 100 -40 -45 Equivalent Noise Voltage (nV/√Hz) 80 Supply Voltage Rejection (dB) -50 Vcc = 5V Gain = +1 60 40 Vcc = 2.7V Rs = 100 Tamb = 25°C -55 -60 -65 20 -70 0 10 -75 30 100 300 1,000 Frequency (Hz) 3,000 10,000 100 300 1,000 3,000 10,000 30,000 100,000 300,000 1,000,000 Frequency (Hz) 7/14 T S931-TS932-TS934 Voltage (50mV/div) Voltage (1V/div) INPUT 0V Vcc = 5V Gain = +1 RL = 100k CL = 50pF OUTPUT 0V INPUT 0V Vcc = 5V Gain = +1 RL = 100k CL = 50pF 0 5 10 15 20 25 Time (µs) 30 35 40 45 50 0 100 200 300 Time (µs) 400 OUTPUT 0V 500 8/14 TS931-TS932-TS934 TS932IN PACKAGE MECHANICAL DATA 8 PINS - PLASTIC PACKAGE Millimeters Dim. Min. A a1 B b b1 D E e e3 e4 F i L Z 0.51 1.15 0.356 0.204 7.95 2.54 7.62 7.62 6.6 5.08 3.81 1.52 Typ. 3.32 1.65 0.55 0.304 10.92 9.75 0.020 0.045 0.014 0.008 0.313 Max. Min. Inches Typ. 0.131 0.065 0.022 0.012 0.430 0.384 0.100 0.300 0.300 0260 0.200 0.150 0.060 Max. 3.18 0.125 9/14 T S931-TS932-TS934 TS931ID - TS932ID PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Millimeters Dim. Min. A a1 a2 a3 b b1 C c1 D E e e3 F L M S 0.1 0.65 0.35 0.19 0.25 4.8 5.8 1.27 3.81 3.8 0.4 4.0 1.27 0.6 8° (max.) 0.150 0.016 Typ. Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45° (typ.) 5.0 6.2 0.189 0.228 Min. 0.004 0.026 0.014 0.007 0.010 Inches Typ. Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.197 0.244 0.050 0.150 0.157 0.050 0.024 10/14 TS931-TS932-TS934 TS934IN PACKAGE MECHANICAL DATA 14 PINS - PLASTIC PACKAGE Millimeters Dim. Min. a1 B b b1 D E e e3 F i L Z 0.51 1.39 0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 1.27 2.54 0.050 Typ. Max. 1.65 Min. 0.020 0.055 Inches Typ. Max. 0.065 0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100 11/14 T S931-TS932-TS934 TS934ID PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO) L C G c1 a2 b e3 D M e A a1 s E 14 1 8 7 F Millimeters Dim. Min. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S 0.1 0.35 0.19 0.5 45° (typ.) 8.55 5.8 1.27 7.62 3.8 4.6 0.5 4.0 5.3 1.27 0.68 8° (max.) 0.150 0.181 0.020 8.75 6.2 0.336 0.228 Typ. Max. 1.75 0.2 1.6 0.46 0.25 Min. 0.004 0.014 0.007 Inches Typ. Max. 0.069 0.008 0.063 0.018 0.010 0.020 0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.027 Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK. 12/14 b1 TS931-TS932-TS934 TS934IPT PACKAGE MECHANICAL DATA 14 PINS - THIN SHRINK SMALL OUTLINE PACKAGE c k L E1 A A2 A1 b e E Millimeters Dim. Min. A A1 A2 b c D E E1 e k l 0.05 0.80 0.19 0.09 4.90 4.30 0° 0.50 Typ. Max. 1.20 0.15 1.05 0.30 0.20 5.10 4.50 8° 0.75 Min. 0.01 0.031 0.007 0.003 0.192 0.169 0° 0.09 D L1 Inches Typ. Max. 0.05 0.006 0.041 0.15 0.012 0.20 0.177 8° 0.030 1.00 0.039 5.00 6.40 4.40 0.65 0.60 0.196 0.252 0.173 0.025 0.0236 13/14 T S931-TS932-TS934 TS931ILT PACKAGE MECHANICAL DATA 5 PINS - TINY PACKAGE (SOT23) A E A2 D b A1 L C E1 Millimeters Dim. Min. A A1 A2 B C D D1 e E F L K 0.90 0 0.90 0.35 0.09 2.80 Typ. 1.20 1.05 0.40 0.15 2.90 1.90 0.95 2.80 1.60 0.5 Max. 1.45 0.15 1.30 0.50 0.20 3.00 Min. 0.035 0.035 0.014 0.004 0.110 Inches Typ. 0.047 0.041 0.016 0.006 0.114 0.075 0.037 0.110 0.063 0.014 Max. 0.057 0.006 0.051 0.020 0.008 0.118 2.60 1.50 0.10 0d 3.00 1.75 0.60 10d 0.102 0.059 0.004 0d 0.0118 0.069 0.024 10d Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibil ity for the consequences of use of such information nor for any infring ement of patents or other righ ts of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change witho ut notice. This publ ication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life suppo rt devices or systems withou t express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom © http://www. st.com 14/14