TS944BI

TS941 TS942 TS944 OUTPUT RAIL TO RAIL MICROPOWER OPERATIONAL AMPLIFIERS s s s s s s s s RAIL TO RAIL OUTPUT VOLTAGE SWING MICROPOWER CONSUMPTION (1.2 µA) SINGLE SUPPLY OPERATION (2.7V to 10V) CMOS INPUTS ULTRA LOW INPUT BIAS CURRENT (1pA) ESD PROTECTION (2kV) LATCH-UP IMMUNITY (Class A) AVAILABLE IN SOT23-5 MICROPACKAGE PIN CONNECTIONS (top view) TS941ILT Output 1 5 VCC VDD Non-inverting input 2 DESCRIPTION The TS94x (Single, Dual & Quad) is Operational Amplifier characterized for 2.7V to 10V operation over -40°C to +85°C temperature range. It is exhibiting an excellent consumption - 1.2µA, while featuring 10kHz gain bandwidth product, 1.5mA output capability and output Rail to Rail operation - 2.85V typ @ 3V with RL=10kΩ. The TS94x Op-Amp is ideal for battery-powered systems, where very low supply current and output Rail to Rail are required. Its very low - 1pA typ input bias current and constant supply current over supply voltage enhance TS94x’s performance near the end of the life battery charge. APPLICATION 3 4 Inverting input TS941ID-TS941IDT N.C. Inve rting Inp u t 1 No n-inve rting Inp ut 1 1 2 3 + 8 N.C. 7 VCC 6 Output 2 5 N.C. V DD 4 TS942IN-TS942ID-TS942IDT-TS942IPT s s s s s Battery-powered systems (Alarm) Portable communication systems (Pagers) Smoke/gas/fire detectors Instrumentation & sensoring PH Meter Output 1 Inve rting Inp ut 1 Non-inve rting Inp ut 1 1 2 3 + + 8 VCC 7 Output 2 6 Inve rting Input 2 5 Non-inve rting Inp ut 2 VDD 4 ORDER CODE Part Number TS941I TS941AI TS941BI TS942I TS942AI TS942BI TS944I TS944AI TS944BI Temperature Range -40, +85° C -40, +85° C -40, +85° C • • • • • • Package NDP • • • • • • • • • L • • • • • • • • • SOT23 Marking K201 K202 K203 TS944IN-TS944ID-TS944IDT-TS944IPT Ou tpu t 1 1 Inve rting Inpu t 1 2 Non-inve rting Inpu t 1 3 VCC 4 Non -inve rting Inp ut 2 5 Inve rting Inp ut 2 6 Ou tpu t 2 7 + + + + 14 Outp u t 4 13 Inve rting Inpu t 4 12 Non-inve rting Inpu t 4 11 VDD 10 Non-inve rting Inpu t 3 9 8 Inve rting Inpu t 3 Outp u t 3 N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT) P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape & Reel (PT) L = Tiny Package (SOT23-5) - only available in Tape & Reel (LT) May 2000 1/14 T S941-TS942-TS944 ABSOLUTE MAXIMUM RATINGS Symbol VCC Vid Vin Toper Tstd Tj Rthjc Supply voltage 1) Differential Input Voltage Input Voltage Range 3) 2) Parameter Value 12 ± 12 -0.3 to 12.3 -40 to + 85 -65 to +150 150 Unit V V V °C °C °C °C/W Operating Free Air Temperature Range Storage Temperature Range Maximum Junction Temperature Thermal Resistance Junction to Case SOT23-5 DIP8 DIP14 SO8 SO14 TSSOP8 TSSOP14 Human Body Model Latch-up Immunity Lead Temperature (soldering, 10sec) 4) 81 42 32 28 22 26 21 256 2 Class A 260 °C/W kV °C R thja ESD Thermal Resistance Junction to Ambient - SOT23-5 1. All voltages values, except differential voltage are with respect to network terminal. 2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal. 3. The magnitude of input and output voltages must never exceed VCC +0.3V. 4. Short-circuits can cause excessive heating and destructive dissipation. OPERATING CONDITIONS Symbol VCC Vicm Supply Voltage Common Mode Input Voltage Range VCCParameter Value 2.7 to 10 -0.2 to VCC+ -1.3 Unit V V 2/14 TS941-TS942-TS944 ELECTRICAL CHARACTERISTICS VCC = +3V, Vee = 0V, RL connected to VCC/2, Tamb = 25°C (unless otherwise specified) Symbol Input Offset Voltage Vio ∆Vio Iio Iib CMR SVR Avd TS941/2/4 TS941/2/4A TS941/2/4B Input Offset Voltage Drift Input Offset Current 1) Input Bias Current 1) Common Mode Rejection Ratio Supply Voltage Rejection Ratio Large Signal Voltage Gain V O = 2Vpp High Level Output Voltage V ID = 100mV Low Level Output Voltage V ID = -100mV R L = 1MΩ R L = 1MΩ R L = 10kΩ R L = 1MΩ R L = 10kΩ 2.9 2.79 7 1 1 85 85 100 2.99 2.85 5 100 1.5 1.3 1.2 RL = 1MΩ, C L = 50pF RL = 1MΩ, C L = 50pF CL = 50pF 10 4 65 2 µA kHz V/ms Degrees 50 210 100 150 10 5 2 mV µV/° C pA pA dB dB dB Parameter Min. Typ. Max. Unit VOH V VOL mV Io Output Source Current V ID = 100mV, VO = VDD Output Sink Current V ID = -100mV, V O = VCC Supply Current (per amplifier) A VCL = 1, no load Gain Bandwith Product Slew Rate Phase Margin mA ICC GBP SR φm 1. Maximum values including unavoidable inaccurates of the industrial test. 3/14 T S941-TS942-TS944 ELECTRICAL CHARACTERISTICS VCC = +5V, Vee = 0V, RL connected to VCC/2, Tamb = 25°C (unless otherwise specified) Symbol Input Offset Voltage Vio ∆Vio Iio Iib CMR SVR Avd TS941/2/4 TS941/2/4A TS941/2/4B Input Offset Voltage Drift Input Offset Current 1) Input Bias Current 1) Common Mode Rejection Ratio Supply Voltage Rejection Ratio Large Signal Voltage Gain V O = 2Vpp High Level Output Voltage V ID = 100mV Low Level Output Voltage V ID = -100mV R L = 1MΩ R L = 1MΩ R L = 10kΩ R L = 1MΩ R L = 10kΩ 4.9 4.79 7 1 1 85 85 100 4.99 4.85 5 100 5 6 1.2 RL = 1MΩ, C L = 50pF RL = 1MΩ, C L = 50pF CL = 50pF 10 5 65 2 µA kHz V/ms Degrees 100 150 10 5 2 mV µV/° C pA pA dB dB dB Parameter Min. Typ. Max. Unit VOH V VOL mV Io Output Source Current V ID = 100mV, VO = VDD Output Sink Current V ID = -100mV, V O = VCC Supply Current (per amplifier) A VCL = 1, no load Gain Bandwith Product Slew Rate Phase Margin mA ICC GBP SR φm 1. Maximum values including unavoidable inaccurates of the industrial test. 4/14 TS941-TS942-TS944 Input Offset Voltage Drift vs Temperature 400 Input Offset Voltage Drift (µV) 300 200 100 0 -100 -200 -300 -400 -500 -40 Vcc = 3V & 5V Supply Current/Amplifier vs Supply Voltage 2.0 Tamb = 25°C Supply Current (µA) 1.5 1.0 0.5 0.0 -20 0 20 40 60 80 0 2 Temperature (°C) 4 6 Supply Voltage (V) 8 10 Supply Current/Amplifier vs Supply Voltage in Overdrive 1.5 Tamb = 25°C Supply Current/Amplifier vs Temperature 1.30 Supply Current (µA) Supply Current (µA) 1.25 Vcc from 2.6V to 10V 1.20 1.0 Vid = - 100mV Vid = + 100mV 0.5 1.15 0.0 0 2 4 6 8 10 Supply Voltage (V) 1.10 -40 -20 0 20 40 Temperature (°C) 60 80 Output Short-Circuit Current vs Temperature Output Short-circuit Current (mA) 6 4 2 0 -2 Isink, Vcc=5V Output Short-Circuit Current (mA) Output Short-Circuit Current vs Supply Voltage 30 Tamb = 25°C 20 Sink Isink, Vcc=3V Isource,Vcc=3V 10 0 -10 Source Isource, Vcc=5V -4 -6 -20 -30 -40 -20 0 20 40 60 80 2 4 6 Supply Voltage (V) 8 10 Temperature (°C) 5/14 T S941-TS942-TS944 Output Short-circuit Current vs Output Voltage 1.0 Output Short-Circuit Current (mA) Sink 0.5 0.0 -0.5 T = +85 °C -1.0 T = +25 °C -1.5 -2.0 0 1 2 Output Voltage (V) T = -40 °C 3 Source Output Short-Circuit Current (mA) T = -40 °C T = +25°CC T = +25 ° 2.0 Output Short-circuit Current vs Output Voltage T = -40 °C T = +25 °C T = +85°C Sink 1.0 T = +85 °C Vcc = 2.6V 0.0 Vcc = 3V -1.0 T = +85 °C T = +25 °C T = -40 °C -3.0 0 1 2 Output Voltage (V) 3 Source -2.0 Output Short-circuit Current vs Output Voltage 8.0 Output Short-Circuit Current (mA) Sink 6.0 4.0 T = +85°C 2.0 0.0 -2.0 -4.0 -6.0 -8.0 0 T = +25°C T = -40°C 1 Source 2 3 Output Voltage (V) 4 5 T = +85°C Vcc = 5V Output Short-circuit Current vs Output Voltage 30.0 Output Short-Circuit Current (mA) Sink 20.0 10.0 Vcc = 10V 0.0 -10.0 -20.0 -30.0 0 2 4 6 Output Voltage (V) 8 10 T = +85 °C T = +25° C T = -40°C Source T = -40°C T = +25°C T = +85 °C T = -40°C T = +25°C High Level Output Voltage vs Supply Voltage 1,000 RL=10k ohm 100 RL tied to Vdd Single Supply Vid = +100mV Low Level Output Voltage vs Supply Voltage 1,000 Voltage Referenced to Vcc (mV) Voltage referenced to Vcc (mV) Voltage referenced to Vdd (mV) RL=10k ohm 100 RL tied to Vcc Single Supply Vid = -100mV 10 RL=100 ohm RL=100k ohm 10 RL=1M ohm RL=1M ohm 1 2 4 6 Supply Voltage (V) 8 10 1 2 4 6 Supply Voltage (V) 8 10 6/14 TS941-TS942-TS944 Gain and Phase vs Frequency 70 60 50 Gain (dB) Gain and Phase vs Frequency 180 70 60 50 Phase (°) Gain (dB) 180 RL = 1M ohm CL = 100 pF Vcc = 3V & 5V 160 140 Phase (°) 120 100 phase 80 gain 60 40 1,000 10,000 Frequency (Hz) 100,000 RL = 1M ohm CL = 50 pF Vcc = 3V & 5V 160 140 120 40 30 20 10 0 100 gain phase 40 30 20 10 0 100 100 80 60 40 100,000 1,000 10,000 Frequency (Hz) Small Signal Transient Response 300 Vcc = +-2.5V Gain = -1 RL = 1M ohm CL = 50 pF 2.5 2.0 Output Voltage (V) 1.5 1.0 0.5 0.0 -0.5 -100 0.0 -1.0 0.0 Large Signal Transient Response Output Voltage (mV) 200 100 0 Vcc = +-2.5V Gain = -1 RL = 1M ohm CL = 50 pF 0.5 1.0 Time (ms) 1.5 2.0 1.0 2.0 3.0 Time (ms) 4.0 5.0 Slew Rate Positive and Negative vs Temperature 4.8 Slew rate negative 4.6 Slew Rate (V/ms) 4.4 4.2 4.0 3.8 3.6 3.4 -80 Gain = +1 RL = 1M ohm CL = 100pf Vcc = 5V -40 0 40 Temperature (°C) 80 120 Slew rate positive 7/14 T S941-TS942-TS944 TS942IN PACKAGE MECHANICAL DATA 8 PINS - PLASTIC PACKAGE Millimeters Dim. Min. A a1 B b b1 D E e e3 e4 F i L Z 0.51 1.15 0.356 0.204 7.95 2.54 7.62 7.62 6.6 5.08 3.81 1.52 Typ. 3.32 1.65 0.55 0.304 10.92 9.75 0.020 0.045 0.014 0.008 0.313 Max. Min. Inches Typ. 0.131 0.065 0.022 0.012 0.430 0.384 0.100 0.300 0.300 0260 0.200 0.150 0.060 Max. 3.18 0.125 8/14 TS941-TS942-TS944 TS941ID - TS942ID PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Millimeters Dim. Min. A a1 a2 a3 b b1 C c1 D E e e3 F L M S 0.1 0.65 0.35 0.19 0.25 4.8 5.8 1.27 3.81 3.8 0.4 4.0 1.27 0.6 8° (max.) 0.150 0.016 Typ. Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45° (typ.) 5.0 6.2 0.189 0.228 Min. 0.004 0.026 0.014 0.007 0.010 Inches Typ. Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.197 0.244 0.050 0.150 0.157 0.050 0.024 9/14 T S941-TS942-TS944 TS942IPT PACKAGE MECHANICAL DATA 8 PINS - THIN SHRINK SMALL OUTLINE PACKAGE k c 0.25mm .010 inch GAGE PLANE L1 L L L1 E1 A A2 A1 5 D b 8 SEATING PLANE E 4 e 1 PIN 1 IDENTIFICATION Millimeters Dim. Min. A A1 A2 b c D E E1 e k l 0.05 0.80 0.19 0.09 2.90 4.30 0° 0.50 Typ. Max. 1.20 0.15 1.05 0.30 0.20 3.10 4.50 8° 0.75 Min. 0.01 0.031 0.007 0.003 0.114 0.169 0° 0.09 Inches Typ. Max. 0.05 0.006 0.041 0.15 0.012 0.122 0.177 8° 0.030 1.00 0.039 3.00 6.40 4.40 0.65 0.60 0.118 0.252 0.173 0.025 0.0236 10/14 TS941-TS942-TS944 TS944IN PACKAGE MECHANICAL DATA 14 PINS - PLASTIC PACKAGE Millimeters Dim. Min. a1 B b b1 D E e e3 F i L Z 0.51 1.39 0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 1.27 2.54 0.050 Typ. Max. 1.65 Min. 0.020 0.055 Inches Typ. Max. 0.065 0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100 11/14 T S941-TS942-TS944 TS944ID PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO) L C G c1 a2 b e3 D M e A a1 s E 14 1 8 7 F Millimeters Dim. Min. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S 0.1 0.35 0.19 0.5 45° (typ.) 8.55 5.8 1.27 7.62 3.8 4.6 0.5 4.0 5.3 1.27 0.68 8° (max.) 0.150 0.181 0.020 8.75 6.2 0.336 0.228 Typ. Max. 1.75 0.2 1.6 0.46 0.25 Min. 0.004 0.014 0.007 Inches Typ. Max. 0.069 0.008 0.063 0.018 0.010 0.020 0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.027 Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK. 12/14 b1 TS941-TS942-TS944 TS944IPT PACKAGE MECHANICAL DATA 14 PINS - THIN SHRINK SMALL OUTLINE PACKAGE c k L E1 A A2 A1 b e E Millimeters Dim. Min. A A1 A2 b c D E E1 e k l 0.05 0.80 0.19 0.09 4.90 4.30 0° 0.50 Typ. Max. 1.20 0.15 1.05 0.30 0.20 5.10 4.50 8° 0.75 Min. 0.01 0.031 0.007 0.003 0.192 0.169 0° 0.09 D L1 Inches Typ. Max. 0.05 0.006 0.041 0.15 0.012 0.20 0.177 8° 0.030 1.00 0.039 5.00 6.40 4.40 0.65 0.60 0.196 0.252 0.173 0.025 0.0236 13/14 TS941-TS942-TS944 TS941ILT PACKAGE MECHANICAL DATA 5 PINS - TINY PACKAGE (SOT23) A E A2 D b A1 L C E1 Millimeters Dim. Min. A A1 A2 B C D D1 e E F L K 0.90 0 0.90 0.35 0.09 2.80 Typ. 1.20 1.05 0.40 0.15 2.90 1.90 0.95 2.80 1.60 0.5 Max. 1.45 0.15 1.30 0.50 0.20 3.00 Min. 0.035 0.035 0.014 0.004 0.110 Inches Typ. 0.047 0.041 0.016 0.006 0.114 0.075 0.037 0.110 0.063 0.014 Max. 0.057 0.006 0.051 0.020 0.008 0.118 2.60 1.50 0.10 0d 3.00 1.75 0.60 10d 0.102 0.059 0.004 0d 0.0118 0.069 0.024 10d Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibil ity for the consequences of use of such information nor for any infring ement of patents or other righ ts of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change witho ut notice. This publ ication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life suppo rt devices or systems withou t express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom © http://www. st.com 14/14