TSH60CD

TSH60,61,62,63,64 Wide-Band, Low-Power Operational Amplifiers with Standby ■ ■ ■ ■ ■ ■ ■ ■ 5V, ±5V specifications Gain-bandwidth product: 60MHz Slew-rate: 80V/µs Output current: up to 45mA Input/output rail-to-rail Specified for 150Ω load Low distortion, THD: 0.1% SO packages Pin connections (top view) TSH60 TSH60 : SO8 NC 1 Inverting Input 2 Non Inverting Input 3 VCC - 4 _ + 8 NC 7 VCC + 6 Output 5 NC TSH61 : SO8 NC 1 8 STANDBY _ + 7 VCC + 6 Output 5 NC Inverting Input 2 Non Inverting Input 3 Description The TSH6x series offers single, dual, triple and quad operational amplifiers featuring high video performances. The TSH6x op-amps can be used in consumer video applications, such as set-top boxes, DVD players and recorders, or TVs, as either video buffers or video line drivers. Their performances guarantee excellent video quality, enhancing the performance of your video solution. Running at single supply voltage from 5V to 12V, amplifiers feature large output voltage swing and high output current capability to drive standard 150Ω loads. The TSH61 and TSH63 also feature standby inputs, allowing the op amps to be put into a standby mode with low power consumption and high output impedance. For easy integration into video applications, the TSH6x series is proposed in standard SO8 and SO14 packages. VCC - 4 TSH62 : SO8 Output1 1 Inverting Input1 2 Non Inverting Input1 3 VCC - 4 _ + _ + 8 VCC + 7 Output2 6 Inverting Input2 5 Non Inverting Input2 TSH63 : SO14 STANDBY1 1 STANDBY2 2 STANDBY3 3 VCC + 4 Non Inverting Input1 5 Inverting Input1 6 Output1 7 + _ + _ _ + 14 Output3 13 Inverting Input3 12 Non Inverting Input3 11 VCC 10 Non Inverting Input2 9 Inverting Input2 8 Output2 TSH64 : SO14 Output1 1 Inverting Input1 2 Non Inverting Input1 3 VCC + 4 Non Inverting Input2 5 Inverting Input2 6 Output2 7 + _ + _ _ + _ + 14 Output4 13 Inverting Input4 12 Non Inverting Input4 11 VCC 10 Non Inverting Input3 9 Inverting Input3 8 Output3 Applications ■ ■ ■ ■ Standard definition video buffers Set-top boxes DVD players and recorders Analog and digital TVs March 2006 Rev. 1 1/13 www.st.com 13 Order Codes TSH60,61,62,63,64 1 Order Codes Type TSH60CD/CDT TSH61CD/CDT TSH62CD/CDT TSH63CD/CDT SO14 TSH64CD/CDT TSH64C 0°C to 70°C SO8 Tube or Tape & Reel Temperature Range Packages Packing Marking TSH60C TSH61C TSH62C TSH63C 2/13 TSH60,61,62,63,64 Absolute Maximum Ratings and Operating Conditions 2 Absolute Maximum Ratings and Operating Conditions Table 1. Symbol VCC Vid Vi Toper Tstg Tj Rthjc Supply Voltage (1) Differential Input Voltage Input Voltage (3) (2) Absolute maximum ratings Parameter Value 14 ±2 ±6 0 to +70 -65 to +150 150 (4) Unit V V V °C °C °C °C/W Operating Free Air Temperature Range Storage Temperature Maximum Junction Temperature Thermal Resistance Junction to Case SO8 SO14 28 22 157 125 2 Rthja ESD Thermal Resistance Junction to Ambiant Area SO8 SO14 HumanBodyModel °C/W kV 1. All voltages values, except differential voltage are with respect to network ground terminal 2. Differential voltages are non-inverting input terminal with respect to the inverting terminal 3. The magnitude of input and output must never exceed VCC +0.3V 4. Short-circuits can cause excessive heating Table 2. Symbol VCC VIC Operating conditions Parameter Supply Voltage Common Mode Input Voltage Range Value 4.5 to 12 VCC- to (V CC+ -1.1) Unit V V 3/13 Standby Mode TSH60,61,62,63,64 3 Table 3. Symbol Vlow Vhigh Standby Mode VCC+ (positive supply voltage), VCC- (negative supply voltage, or ground), Tamb = 25°C (unless otherwise specified) Parameter Standby Low Level Standby High Level pin 8 (TSH61) to VCCpin 1,2 or 3 (TSH63) to VCCRout Cout Test Conditions Min. VCC - Typ. Max. (VCC+0.8) Unit V V µA MΩ pF µs µs (V CC- +2) 20 10 17 2 Down to ICC STBY = 10 µA 10 (VCC +) 55 Current Consumption per ICC STBY Operator when STANDBY is Active Zout Ton Toff Output Impedance (Rout//Cout) Time from Standby Mode to Active Mode Time from Active Mode to Standby Mode TSH61 Standby Control pin 8 (STBY) Vlow Vhigh TSH63 Standby Control pin 1 (STBY OP1) Vlow Vhigh x x x x pin 2 (STBY OP2) x x Vlow Vhigh x x Vlow Vhigh pin 3 (STBY O P3) x x x OP1 Standby Active x x x x Operator Status Standby Active Operator Status OP1 x x Standby Active x x OP3 x x x x Standby Active 4/13 TSH60,61,62,63,64 Electrical Characteristics 4 Table 4. Symbol |V io| Iib Cin ICC CMRR PSRR Avd Electrical Characteristics VCC+ = 5V, VCC- = GND, Vic = 2.5V, Tamb = 25°C (unless otherwise specified) Parameter Input Offset Voltage Input Bias Current Input Capacitance Supply Current per Operator Common Mode Rejection Ratio (δVic/δVio) Power Supply Rejection Ratio (δVCC/δVout) Large Signal Voltage Gain +0.1 < Vic < 3.9V & Vout = 2.5V Positive & Negative Rail RL=150 Ω to 1.5V Vout =1V to 4V Vid = +1, Vout to 1.5V Vid = -1, Vout to 1.5V |Source| Sink RL = 150Ω to GND RL = 150Ω to 2.5V RL = 150Ω to GND RL = 150Ω to 2.5V AVCL = +1 RL=150 Ω to 2.5V AVCL = +2 RL=150 Ω to 2.5V RL=150 Ω to 2.5V AVCL = +2, F = 4MHz RL=150 Ω to 2.5V Vout = 1Vpp Vout = 2Vpp AVCL= +2, RL = 150Ω to 2.5V F = 4.5MHz, Vout = 2Vpp AVCL = +2, R L=150Ω to 2.5V F = 4.5MHz, Vout = 2Vpp F= DC to 6MHz, AVCL= +2 F=1MHz to 10MHz Test Conditions Tamb = 25 C Tmin. < T amb < Tmax. ° Min. Typ. 1.5 6 0.3 8.2 Max. 10 12 Unit mV µA pF mA dB dB dB 85 70 78 Io Output Short Circuit Current Source 45 45 4.36 4.66 48 220 60 100 400 mA Voh Vol Bw SR φm High Level Output Voltage Low Level Output Voltage Bandwidth @-3dB Slew Rate Phase Margin V mV MHz V/µs ° 86 40 THD Total Harmonic Distortion -57 -51 0.5 0.5 0.2 65 dB ∆G Df Gf Differential gain Differential phase Gain Flatness % ° dB dB Vo1/Vo2 Channel Separation 5/13 Electrical Characteristics Table 5. Symbol |Vio| Iib Cin ICC CMRR PSRR Avd TSH60,61,62,63,64 VCC+ = 5V, VCC- = -5V, Vic = GND, Tamb = 25°C (unless otherwise specified) Parameter Input Offset Voltage Input Bias Current Input Capacitance Supply Current per Operator Common Mode Rejection Ratio (δVic/δVio) Power Supply Rejection Ratio (δVCC/δVout) Large Signal Voltage Gain -4.9