TSH73

TSH70,71,72,73,74,75 WIDE BAND, LOW POWER OPERATIONAL AMPLIFIER WITH STANDBY FUNCTION s 3V, 5V, ±5V SPECIFICATIONS s 3dB-BANDWIDTH : 90MHz s GAIN-BANDWIDTH PRODUCT : 70MHz s SLEW-RATE : 100V/µs s OUTPUT CURRENT : up to 55mA s INPUT SINGLE SUPPLY VOLTAGE s OUTPUT RAIL TO RAIL s SPECIFIED FOR 150Ω LOAD s LOW DISTORTION, THD : 0.1% s SOT23-5, TSSOP and SO PACKAGES DESCRIPTION TSH7x serie offers Single, Dual, Triple and Quad operational amplifiers featuring high video performances with large bandwidth, low distortion and excellent supply voltage rejection. Running at single supply voltage from 3V to 12V, amplifiers feature large output voltage swing and high output current capability to drive standard 150Ω loads. Low operating voltage makes TSH7x amplifiers ideal for use on portable equipments. The TSH71, TSH73 and TSH75 also feature some Standby input, each of which allows the op amp to be put into a standby mode with low power consumption and high output impedance.The function allows power saving or signals switching/multiplexing for high speed applications and video applications. For board space and weight saving, TSH7x series is proposed in SOT23-5, TSSOP and SO packages. APPLICATION Output 1 VCC - 2 Non-Inv. In. 3 PIN CONNECTIONS (top view) TSH70 : SOT23-5/SO8 5 VCC + NC 1 Inv. In. 2 4 Inv. In. Non-Inv. In. 3 VCC - 4 _ + 8 NC 7 VCC + 6 Output 5 NC +- TSH71 : SO8/TSSOP8 NC 1 Inverting Input 2 Non Inverting Input 3 VCC - 4 _ + 8 STANDBY 7 VCC + 6 Output 5 NC TSH72 : SO8/TSSOP8 Output1 1 Inverting Input1 2 Non Inverting Input1 3 VCC - 4 _ + _ + 8 VCC + 7 Output2 6 Inverting Input2 5 Non Inverting Input2 TSH73 : SO14/TSSOP14 STANDBY1 1 STANDBY2 2 STANDBY3 3 VCC + 4 Non Inverting Input1 5 Inverting Input1 6 Output1 7 + _ + _ _ + 14 Output3 13 Inverting Input3 12 Non Inverting Input3 11 VCC 10 Non Inverting Input2 9 Inverting Input2 8 Output2 TSH74 : SO14/TSSOP14 Output1 1 Inverting Input1 2 Non Inverting Input1 3 VCC + 4 Non Inverting Input2 5 Inverting Input2 6 Output2 7 + _ + _ _ + _ + 14 Output4 13 Inverting Input4 12 Non Inverting Input4 11 VCC 10 Non Inverting Input3 9 Inverting Input3 8 Output3 TSH75 : SO16/TSSOP16 Output1 1 Inverting Input1 2 Non Inverting Input1 3 VCC + 4 Non Inverting Input2 5 Inverting Input2 6 Output2 7 STANDBY 8 + _ + _ _ + _ + 16 Output4 15 Inverting Input4 14 Non Inverting Input4 13 VCC 12 Non Inverting Input3 11 Inverting Input3 10 Output3 9 STANDBY s Video buffers s A/D Converters driver s HiFi applications August 2002 1/25 TSH70, 71, 72, 73, 74, 75 ABSOLUTE MAXIMUM RATINGS Symbol VCC Vid Supply Voltage 3) 1) 2) Parameter Value 14 Unit V Differential Input Voltage ±2 ±6 0 to +70 -65 to +150 150 4) 80 28 22 35 37 32 35 250 157 125 110 130 110 110 V V °C °C °C Vi Toper Tstg Tj Input Voltage Operating Free Air Temperature Range Storage Temperature Maximum Junction Temperature Thermal resistance junction to case SOT23-5 SO8 SO14 SO16 TSSOPO8 TSSOP14 TSSOP16 Rthjc °C/W Thermal resistance junction to ambiant area Rthja SOT23-5 SO8 SO14 SO16 TSSOPO8 TSSOP14 TSSOP16 °C/W ESD 1. 2. 3. 4. HumanBodyModel 2 kV All voltages values, except differential voltage are with respect to network ground terminal Differential voltages are non-inverting input terminal with respect to the inverting terminal The magnitude of input and output must never exceed VCC +0.3V Short-circuits can cause excessive heating OPERATING CONDITIONS Symbol VCC VIC Standby Supply Voltage Common Mode Input Voltage Range - Parameter Value 3 to 12 VCC to (VCC -1.1) (VCC-) to (VCC+) + Unit V V V ORDER CODES Type TSH70CLT TSH70CD TSH70CDT TSH71CD TSH71CDT TSH71CPT TSH72CD TSH72CDT TSH72CPT TSH73CD TSH73CDT TSH73CPT TSH74CD TSH74CDT TSH74CPT TSH75CD TSH75CDT TSH75CPT Temperature Package SOT23-5 SO8 SO8 Tape SO8 SO8 Tape TSSOP8 SO8 SO8 Tape TSSOP8 SO14 SO14 Tape TSSOP14 SO14 SO14 Tape TSSOP14 SO16 SO16 Tape TSSOP16 Marking K301 70C 70C 71C 71C 71C 72C 72C 72C 73C 73C 73C 74C 74C 74C 75C 75C 75C C = Temperature range D = Small Outline Package (SO) - also available in Tape & Reel (DT) P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape & Reel (PT) L = Tiny Package (SOT23-5) - only available in Tape & Reel (LT) 0°C to 70°C 2/25 TSH70, 71, 72, 73, 74, 75 ELECTRICAL CHARACTERISTICS VCC+ = 3V, V CC- = GND, Vic = 1.5V, Tamb = 25°C (unless otherwise specified) Symbol |Vio| ∆Vio Iio Iib Cin ICC CMR SVR PSR Input Input Input Input Parameter TestCondition Min. Typ. 1.2 4 0.1 6 0.2 Tamb = 25°C Tmin. < Tamb < Tmax. +0.1