TSH80IDT

TSH80-TSH81-TSH82 Wide band rail-to-rail operational amplifier with standby function Features ■ ■ ■ ■ ■ ■ ■ ■ ■ Operating range from 4.5V to 12V 3dB-bandwidth: 100MHz Slew-rate 100V/μs Output current up to 55mA Input single supply voltage Output rail-to-rail Specified for 150Ω load Low distortion, THD 0.1% SOT23-5, TSSOP and SO packages Pin connections TSH80/SO-8 NC 1 Inv. input 2 3 VCC- 4 _ + 8 NC 7 VCC+ 6 Output 5 NC SOT23-5 SO-8 TSSOP8 Pin connections TSH80/SOT23-5 Output 1 VCC- 2 Non-inv. input 3 5 VCC+ +4 Inv. input Applications ■ ■ ■ Video buffers A/D converters driver Hi-fi applications Description The TSH8x series offers single and dual operational amplifiers featuring high video performance with large bandwidth, low distortion and excellent supply voltage rejection. These amplifiers also feature large output voltage swing and high output current capability to drive standard 150Ω loads. Running at single or dual supply voltage from 4.5V to 12V, these amplifiers are tested at 5V (±2.5V) and 10V (±5V) supplies. The TSH81 also features a standby mode, which allows the operational amplifier to be put into a standby mode with low power consumption and high output impedance. This function allows power saving or signal switching/multiplexing for high-speed applications and video applications. For board space and weight saving, the TSH8x series is proposed in SOT23-5, TSSOP8 and SO-8 plastic micropackages. Pin connections TSH81 SO-8/TSSOP8 NC 1 Inverting input 2 Non inverting Input 3 VCC- 4 _ + 8 STANDBY 7 VCC+ 6 Output 5 NC Pin connections TSH82 SO-8/TSSOP8 Output1 1 Inverting input1 2 Non inv. input1 3 VCC- 4 _ + _ + 8 VCC+ 7 Output2 6 Inverting input2 5 Non inv. input2 October 2007 Rev 4 1/24 www.st.com 24 Contents TSH80-TSH81-TSH82 Contents 1 2 3 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Test conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3.1 3.2 Layout precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Video capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4 5 Precautions on asymmetrical supply operation . . . . . . . . . . . . . . . . . 19 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5.1 5.2 5.3 SO-8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 TSSOP8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 SOT23-5 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 6 7 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2/24 TSH80-TSH81-TSH82 Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1. Symbol VCC Vid Vi Toper Tstg Tj Supply voltage (1) Differential input voltage Input voltage (3) (2) Absolute maximum ratings Parameter Value 14 ±2 ±6 -40 to +85 -65 to +150 150 (4) Unit V V V °C °C °C Operating free air temperature range Storage temperature Maximum junction temperature Thermal resistance junction to case SOT23-5 SO8 TSSOPO8 Rthjc 80 28 37 250 157 130 2 °C/W Rthja Thermal resistance junction to ambient area SOT23-5 SO8 TSSOPO8 Human body model (HBM) °C/W ESD kV 1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting terminal. 3. The magnitude of input and output must never exceed VCC +0.3V. 4. Short-circuits can cause excessive heating. Table 2. Symbol VCC VIC Standby (pin 8) Operating conditions Parameter Supply voltage Common mode input voltage range Threshold on pin 8 for TSH81 VCCValue 4.5 to 12 to (VCC+ -1.1) Unit V V V (VCC-) to (VCC+) 3/24 Electrical characteristics TSH80-TSH81-TSH82 2 Table 3. Symbol |Vio| ΔVio Iio Iib Cin ICC Electrical characteristics VCC+ = +5V, VCC- = GND, Vic = 2.5V, Tamb = 25°C (unless otherwise specified) Parameter Input offset voltage Input offset voltage drift vs. temperature Input offset current Input bias current Input capacitance Supply current per operator Tamb= 25°C Tmin < Tamb < Tmax +0.1