TSM103WID

TSM103W Dual Operational Amplifier and Voltage Reference OPERATIONAL AMPLIFIER s s s s s s s s s s s s LOW INPUT OFFSET VOLTAGE : 0.5mV typ. LOW SUPPLY CURRENT : 350µA/op. (@ VCC = 5V) MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (VCC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER SUPPLY RANGE : 3 to 32V ±1.5 TO ±16V 1.5kV ESD PROTECTION VOLTAGE REFERENCE FIXED OUTPUT VOLTAGE REFERENCE 2.5V ±0.4% OR ±0.7% VOLTAGE PRECISION SINK CURRENT CAPABILITY : 1 to 100mA TYPICAL OUTPUT IMPEDANCE : 0.2Ω D SO-8 (Plastic Micropackage) PIN CONNECTIONS (top view) DESCRIPTION The TSM103W is a monolithic IC that includes one independent op-amp and another op-amp for which the non-inverting input is wired to a 2.5V fixed Voltage Reference. This device offers both space and cost savings in many applications such as power supply management or data acquisition systems. Output 1 1 OP1 OP2 8 VCC+ 7 Output 2 6 Inverting Input 2 + - Inverting Input 1 2 Non-inverting Input 1 3 V -4 CC + VRef 5 Non-inverting Input 2 ORDER CODE Part Number TSM103WID TSM103WIDT TSM103WAID TSM103WAIDT Temperature Package Packaging Range Tube Tape & Ree Tube Tape & Reel -40, +105°C SO-8 April 2004 Revision 3 1/7 TSM103W 1 ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage Differential Input Voltage Input VoltageL Storage temperature range Continuous cathode current range Maximum Junction Temperature Thermal Resistance Junction to Ambient (SO package) Maximum Lead Temperature (10 seconds maximum) Electrostatic Discharge Protection ABSOLUTE MAXIMUM RATINGS Symbol VCC Vid Vi Tstg Ik Tj Rthja Tl ESD Value 36 Vcc + 0.6 -0.3 to Vcc + 0.3V -65 to + 150 -100 to 150 150 175 260 1.5 Unit V V V °C mA °C °C/W °C kV OPERATING CONDITIONS Symbol Vcc Ik Toper DC Supply Conditions Vref Cathode Current Operating Free-air Temperature Range Parameter Value 3 to 32 1 to 100 -40°C, +105°C Unit V mA °C 2/7 ELECTRICAL CHARACTERISTICS 2 ELECTRICAL CHARACTERISTICS Symbol Parameter Total Supply Current, excluding Current in the Voltage Reference Vcc+ = 5V, no load Tmin. < Tamb < Tmax. Vcc+ = 30V, no load Tmin. < Tamb < Tmax Min. Typ. Max. TSM103W Unit ICC 0.7 1.2 2 mA OPERATOR 2 (independent op-amp) VCC+ = +5V, VCC = Ground, Vo = 1.4V,Tamb = 25°C (unless otherwise specified) Symbol Parameter Input Offset Voltage Vicm = 0V TSM103WA, Tamb = 25° Tmin. ≤ Tamb ≤ Tmax. TSM103W, Tamb = 25° Tmin. ≤ Tamb ≤ Tmax. Input Offset Voltage Drift Input Offset Current Tmin. ≤ Tamb ≤ Tmax. Input Bias Current Tmin. ≤ Tamb ≤ Tmax Large Signal Voltage Gain VCC = 15V, RL = 2k, Vo = 1.4V to 11.4V Tmin. ≤ Tamb ≤ Tmax. Supply Voltage Rejection Ratio VCC = 5V to 30V Input Common Mode Voltage Range VCC = +30V - see note 1 Tmin. ≤ Tamb ≤ Tmax. Common Mode Rejection Ratio Tmin. ≤ Tamb ≤ Tmax. Output Current Source VCC = +15V, Vo = 2V, Vid = +1V Short Circuit to Ground VCC = +15V Output Current Sink Vid = -1V, VCC = +15V, Vo = 2V VCC = +15V, Vo = 0.2V High Level Output Voltage VCC+ = 30V Tamb = 25°C, RL = 2k Tmin. ≤ Tamb ≤ Tmax Tamb = 25°C, RL = 10k Tmin. ≤ Tamb ≤ Tmax. Low Level Output Voltage RL = 10k Tmin. ≤ Tamb ≤ Tmax. Slew Rate at Unity Gain Vi = 0.5 to 3V, VCC = 15V RL = 2k, CL = 100pF, unity gain 50 25 65 0 0 70 60 20 85 Min. Typ. Max. 2 3 4 5 Unit mV Vio 0.5 1 7 2 20 DVio Iio Iib Avd SVR Vicm CMR Isource Io µV/°C 75 150 150 200 nA nA 100 100 (VCC+) -1.5 (VCC+) -2 V/mV dB V dB mA 60 mA 40 40 Isink 10 12 20 50 mA µA VOH 26 26 27 27 27 28 V VOL 5 20 20 mV SR 0.2 0.4 V/µs 3/7 TSM103W ELECTRICAL CHARACTERISTICS Symbol GBP Parameter Gain Bandwidth Product VCC = 30V,RL = 2k, CL = 100pF f = 100kHz, Vin = 10mV Total Harmonic Distortion f = 1kHz AV = 20dB,RL = 2k, VCC = 30V CL = 100pF, Vo = 2Vpp Equivalent Input Noise Voltage f = 1kHz, Rs = 100Ω Vcc = 30V Min. 0.5 Typ. 0.9 Max. Unit MHz THD 0.02 % en 50 nV/√Hz 1) The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is VCC+ - 1.5V. Both inputs can go to Vcc+ 0.3V without damage. OPERATOR 1 (op-amp with non-inverting input connected to the internal Vref) VCC+ = +5V, VCC- = Ground, Tamb = 25°C (unless otherwise specified) Symbol Parameter Input Offset Voltage Vicm = 0V TSM103WA, Tamb = 25° Tmin. ≤ Tamb ≤ Tmax. TSM103W, Tamb = 25° Tmin. ≤ Tamb ≤ Tmax. Input Offset Voltage Drift Input Bias Current negative input Large Signal Voltage Gain VCC = 15V, RL = 2k, Vo = 1.4V to 11.4V Tmin. ≤ Tamb ≤ Tmax Supply Voltage Rejection Ratio Vicm = 0V VCC+ = 5V to 30V Output Current Source Vo = 2V VCC = +15V, Vid = +1V Short Circuit to Ground VCC = +15V Output Current Sink Vid = -1V, VCC = +15V, Vo = 2V VCC = +15V, Vo = 0.2V High Level Output Voltage VCC+ = 30V Tamb = 25°C, RL = 2k Tmin. ≤ Tamb ≤ Tmax. Tamb = 25°C, RL = 10k Tmin. ≤ Tamb ≤ Tmax. Low Level Output Voltage RL = 10k Tmin. ≤ Tamb ≤ Tmax. Slew Rate at Unity Gain Vi = 0.5 to 2V, VCC = 15V RL = 2k, CL = 100pF, unity gain 0.2 Min. Typ. Max. Unit Vio 0.5 1 7 20 2 3 4 5 mV DVio Iib Avd µV/°C nA 100 V/mV SVR 65 100 dB Isource Io 20 40 40 60 mA mA Isink 10 12 20 50 mA µA VOH 26 26 27 27 27 V 28 5 20 20 VOL mV SR 0.4 V/µs 4/7 ELECTRICAL CHARACTERISTICS TSM103W Symbol GBP Parameter Gain Bandwidth Product VCC = 30V,RL = 2k, CL = 100pF f = 100kHz, Vin = 10mV Total Harmonic Distortion f = 1kHz AV = 20dB,RL = 2k, VCC = 30V CL = 100pF, Vo = 2Vpp Min. 0.5 Typ. 0.9 Max. Unit MHz THD 0.02 % VOLTAGE REFERENCE Symbol Parameter Reference Input Voltage, Ik=10mA TSM103WA ±0.4% Tamb = 25°C Tmin. ≤ Tamb ≤ Tmax. TSM103W ±0.7% Tamb = 25°C Tmin. ≤ Tamb ≤ Tmax. Reference Input Voltage Deviation Over Temperature Range VKA = Vref; Ik = 10mA Tmin. ≤ Tamb ≤ Tmax. Minimum Cathode Current for Regulation VKA = Vref Dynamic Impedance - note VKA = Vref, ∆IK = 1 to 100mA, f < 1kHz 1 Min. 2.49 2.48 2.482 2.465 Typ. 2.5 2.500 Max. 2.51 2.52 2.518 2.535 Unit Vref V ∆Vref 7 0.5 0.2 30 1 0.5 mV mA Imin |ZKA| Ω 1) The dynamic impedance is defined as [ZKA| = ∆VKA/∆IK 5/7 TSM103W PACKAGE MECHANICAL DATA ELECTRICAL CHARACTERISTICS SO-8 MECHANICAL DATA DIM. A A1 A2 B C D E e H h L k ddd 0.1 5.80 0.25 0.40 mm. MIN. 1.35 0.10 1.10 0.33 0.19 4.80 3.80 1.27 6.20 0.50 1.27 0.228 0.010 0.016 TYP MAX. 1.75 0.25 1.65 0.51 0.25 5.00 4.00 MIN. 0.053 0.04 0.043 0.013 0.007 0.189 0.150 0.050 0.244 0.020 0.050 inch TYP. MAX. 0.069 0.010 0.065 0.020 0.010 0.197 0.157 8˚ (max.) 0.04 0016023/C 6/7 SUMMARY OF CHANGES 3 SUMMARY OF CHANGES Date Revision 1-2 First Release Description of Changes TSM103W 02-April-2004 3 1 - Vid=Vcc+0.6 modified on AMR table - page 2 2 - Add Ik parameter on AMR table - page 2 3 - Avd test condition equal on both tables Operator 1 & Operator 2 pages 3 & 4 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2004 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Repubic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States www.st.com 7/7