TSV321, TSV358, TSV324
TSV321A, TSV358A, TSV324A
Datasheet
General purpose input/output rail-to-rail low-power operational amplifiers
Pin connections (top view)
SOT23-5
SO8
Features
•
Operating range VCC = 2.5 V to 6 V
•
•
Rail-to-rail input and output
Extended Vicm (VDD - 0.2 V to VCC + 0.2 V)
•
•
•
Capable of driving a 32 Ω load resistor
High stability: 500 pF
Operating temperature range: -40 to 125 °C
Applications
SO8, MiniSO8, TSSOP8
SO14, TSSOP14
•
•
•
•
Battery powered applications
Audio driver (headphone driver)
Sensor signal conditioning
Laptop/notebook computers
Description
The TSV358, TSV358A, TSV324, and TSV324A (dual and quad) devices are low
voltage versions of the LM358 and LM324 commodity operational amplifiers. The
TSV321 and TSV321A are the single version. All devices operate with voltages as
low as 2.5 V and feature both I/O rail-to-rail.
Maturity status link
TSV321, TSV358, TSV324,
TSV321A, TSV358A, TSV324A
The common mode input voltage extends 200 mV beyond the supply voltages at 25
°C while the output voltage swing is within 100 mV of each rail with a 600 Ω load
resistor. At VCC = 3 V, these devices offer 1.3 MHz of gain bandwidth product and
provide high output current capability with a typical value of 80 mA.
These features make the TSV3xx and TSV3xxA family ideal for active filters, general
purpose low voltage applications, and general purpose portable devices.
Related products
LMV321L,
LMV358L,
LMV324L
for newer technology
version
TSV851,
TSV852,
TSV854
for enhanced
performances
DS4381 - Rev 9 - November 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
VCC
Supply voltage (1)
7
Vid
Differential input voltage (2)
±1
Vin
Input voltage
Tstg
Storage temperature
Tj
Rthja
Rthjc
Thermal resistance junction-to-case(3)
-65 to +150
150
SOT23-5
250
SO8
125
MiniSO8
190
TSSOP8
120
SO14
105
TSSOP14
100
SOT23-5
81
SO8
40
MiniSO8
39
TSSOP8
37
SO14
31
TSSOP14
32
HBM: human body model (4)
ESD
V
VDD -0.3 to VCC +0.3
Maximum junction temperature
Thermal resistance junction-to-ambient (3)
Unit
°C
°C/W
2
kV
MM: machine model (5)
200
V
CDM: charged device model (6)
1.5
kV
Latch-up immunity
200
mA
Lead temperature (soldering, 10 s)
250
°C
Output short-circuit duration
See
(7)
1. All voltage values, except the differential voltage are with respect to the network terminal.
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If Vid >
±1 V, the maximum input current must not exceed ±1 mA. When Vid > ±1 V, an input series resistor must be
added to limit input current.
3. Short-circuits can cause excessive heating and destructive dissipation. Rth are typical values.
4. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
6. Charged device model: all pins plus package are charged together to the specified voltage and then
discharged directly to ground.
7. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is
approximately 80 mA, independent of the magnitude of VCC. Destructive dissipation can result from
simultaneous short-circuits on all amplifiers.
DS4381 - Rev 9
page 2/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Absolute maximum ratings and operating conditions
Table 2. Operating conditions
Symbol
Parameter
VCC
Supply voltage
Vicm
Common mode input voltage
range
Toper
Operating free air temperature range
DS4381 - Rev 9
Tamb = 25 °C, 2.5 ≤ VCC ≤ 6 V
Tmin < Tamb < Tmax, 2.5 ≤ VCC ≤ 5.5 V
Value
Unit
2.5 to 6
V
VDD - 0.2 to VCC + 0.2
VDD to VCC
-40 to + 125
V
°C
page 3/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Electrical characteristics
2
Electrical characteristics
Table 3. Electrical characteristics at VCC = +3 V, VDD = 0 V, RL, CL connected to VCC/2, and Tamb = 25 °C (unless
otherwise specified)
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
0.2
3
Unit
Vicm = Vout = VCC /2
TSV321/358/324
Vio
Input offset voltage
Tmin ≤ Tamb ≤ Tmax
6
TSV321A/358A/324A
0.1
Tmin ≤ Tamb ≤ Tmax
ΔVio/ΔT
Iio
Iib
CMR
Avd
VOH
VOL
Io
ICC
GBP
Input bias current
Common mode rejection ratio 20
log (ΔVic/ΔVio)
Large signal voltage gain
High level output voltage, VOH =
Vout
Low level output voltage
Vicm = Vout = VCC /2 (1)
3
Tmin ≤ Tamb ≤ Tmax
Vicm = Vout = VCC
40
Tmin ≤ Tamb ≤ Tmax
0 ≤ Vicm ≤ VCC, Vout = VCC /2
60
80
Vout = 0.5 V to 2.5 V, RL = 2 kΩ
80
92
Vout = 0.5 V to 2.5 V, RL = 600 Ω
74
95
Vid = 100 mV, RL = 2 kΩ
2.82
2.95
Vid = 100 mV, RL = 600 Ω
2.80
2.95
Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2
kΩ
2.82
Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL =
600 Ω
2.80
88
120
Vid = -100 mV, RL = 600 Ω
115
160
Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2
kΩ
120
Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL =
600 Ω
160
Vid = -100 mV, VO = VCC
20
80
Phase margin
en
Input voltage noise
dB
Vid = -100 mV, RL = 2 kΩ
Output sink current
ɸm
nA
125
V
80
Slew rate
30
150
20
Gain bandwidth product
µV/°C
60
/2(1)
Vid = 100 mV, VO = VDD
SR
THD
2
Output source current
Supply current (per amplifier)
1
3
Input offset voltage drift
Input offset current
mV
AVCL = 1, no load
420
Tmin ≤ Tamb ≤ Tmax
mV
mA
650
690
µA
RL = 10 kΩ, CL = 100 pF, f = 100 kHz
1
1.3
MHz
RL = 10 kΩ, CL = 100 pF
0.42
0.6
V/µs
53
Degrees
27
nV/√ Hz
0.01
%
CL = 100 pF
Total harmonic distortion
1. Maximum values include unavoidable inaccuracies of the industrial tests.
DS4381 - Rev 9
page 4/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Electrical characteristics
Table 4. Electrical characteristics at VCC = +5 V, VDD = 0 V, RL, CL connected to VCC/2, and Tamb = 25 °C (unless
otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
0.2
3
Unit
Vicm = Vout = VCC /2
TSV321/358/324
Vio
Input offset voltage
Tmin ≤ Tamb ≤ Tmax
6
TSV321A/358A/324A
0.1
Tmin ≤ Tamb ≤ Tmax
ΔVio/ΔT
Iio
Iib
Input bias current
2
Vicm = Vout = VCC /2 (1)
3
Tmin ≤ Tamb ≤ Tmax
Vicm = Vout = VCC /2(1)
70
Tmin ≤ Tamb ≤ Tmax
0 ≤ Vicm ≤ VCC, Vout = VCC /2
65
85
SVR
Supply voltage rejection ratio 20
log (ΔVCC/ΔVio)
VCC = 2.5 V to 5 V
70
90
Avd
Large signal voltage gain
Vout = 0.5 V to 4.5 V, RL = 2 kΩ
83
92
Vout = 0.5 V to 4.5 V, RL = 600 Ω
77
85
Vid = 100 mV, RL = 2 kΩ
4.80
4.95
Vid = 100 mV, RL = 600 Ω
4.75
4.90
Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2
kΩ
4.80
Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL =
600 Ω
4.75
VOL
Io
ICC
GBP
Low level output voltage
130
Vid = -100 mV, RL = 600 Ω
115
188
Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2
kΩ
130
Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL =
600 Ω
188
80
Output sink current
Vid = -100 mV, VO = VCC
20
80
Slew rate
ɸm
Phase margin
en
Input voltage noise
THD
88
20
SR
dB
Vid = -100 mV, RL = 2 kΩ
Vid = 100 mV, VO = VDD
Gain bandwidth product
nA
130
V
Output source current
Supply current (per amplifier)
30
150
Common mode rejection ratio 20
log (ΔVic/ΔVio)
High level output voltage, VOH =
Vout
µV/°C
60
CMR
VOH
1
3
Input offset voltage drift
Input offset current
mV
AVCL = 1, no load
500
Tmin ≤ Tamb ≤ Tmax
mV
mA
835
875
µA
RL = 10 kΩ, CL = 100 pF, f = 100 kHz
1
1.4
MHz
RL = 10 kΩ, CL = 100 pF
0.42
0.6
V/µs
55
Degrees
27
nV/√ Hz
0.01
%
CL = 100 pF
Total harmonic distortion
1. Maximum values include unavoidable inaccuracies of the industrial tests.
DS4381 - Rev 9
page 5/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Electrical characteristics
Figure 1. Supply current/amplifier vs. supply voltage
Figure 2. Supply current/amplifier vs. temperature
Figure 3. Output power vs. supply voltage
Figure 4. Input offset voltage drift vs. temperature
Figure 5. Input bias current vs. temperature
Figure 6. Open loop gain vs. temperature at VCC = 5 V
DS4381 - Rev 9
page 6/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Electrical characteristics
Figure 7. Open loop gain vs. temperature at VCC = 3 V
Figure 8. High level output voltage vs. temperature
Figure 9. Low level output voltage vs. temperature
Figure 10. Output current vs. temperature at VCC = 5 V
100
-40
Figure 11. Output current vs. temperature at VCC = 3 V
-20
0
20
40
60
80
100
120
140
Figure 12. Output current vs. output voltage at VCC = 5 V
100
-40
DS4381 - Rev 9
-20
0
20
40
60
80
100
120
140
page 7/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Electrical characteristics
Figure 13. Output current vs. output voltage at VCC = 3 V
Figure 14. Gain and phase vs. frequency at VCC = 5 V
k
Figure 15. Gain and phase vs. frequency at VCC = 3 V
Figure 16. Slew rate vs. temperature at VCC = 5 V
k
Figure 17. Slew rate vs. temperature at VCC = 3 V
DS4381 - Rev 9
Figure 18. Distortion vs. frequency
page 8/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Package information
3
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions
and product status are available at: www.st.com. ECOPACK is an ST trademark.
DS4381 - Rev 9
page 9/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
SOT23-5 package information
3.1
SOT23-5 package information
Figure 19. SOT23-5 package outline
Table 5. SOT23-5 package mechanical data
Dimensions
Millimeters
Symbol
Min.
Max.
Min.
Typ.
Max.
A
0.90
1.45
35.4
57.1
A1
0.00
0.15
0.00
5.9
A2
0.90
1.30
35.4
51.2
b
0.35
0.50
13.7
19.7
C
0.09
0.20
3.5
7.8
D
2.80
3.00
110.2
118.1
E
2.60
3.00
102.3
118.1
E1
1.50
1.75
59.0
68.8
e
0.95
37.4
e1
1.9
74.8
L
DS4381 - Rev 9
Typ.
Mils
0.35
0.55
13.7
21.6
page 10/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
SO8 package information
3.2
SO8 package information
Figure 20. SO8 package outline
Table 6. SO-8 mechanical data
Dim.
mm
Min.
Inches
Typ.
A
Min.
Typ.
1.75
0.25
Max.
0.069
A1
0.1
A2
1.25
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.01
D
4.8
4.9
5
0.189
0.193
0.197
E
5.8
6
6.2
0.228
0.236
0.244
E1
3.8
3.9
4
0.15
0.154
0.157
e
0.004
0.01
0.049
1.27
0.05
h
0.25
0.5
0.01
0.02
L
0.4
1.27
0.016
0.05
L1
k
ccc
DS4381 - Rev 9
Max.
1.04
0
0.04
8°
0.1
1°
8°
0.004
page 11/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
MiniSO8 package information
3.3
MiniSO8 package information
Figure 21. MiniSO8 package outline
DS4381 - Rev 9
page 12/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
MiniSO8 package information
Table 7. MiniSO8 package mechanical data
Dim.
Millimeters
Min.
Inches
Typ.
A
Min.
Typ.
1.10
A1
0
A2
0.75
A3
0.30
b
Max.
1.10
0.15
0.05
0.85
0.95
0.75
0.85
0.95
0.35
0.40
0.30
0.35
0.40
0.22
0.40
0.28
0.36
c
0.08
0.23
0.15
0.19
D
2.80
3.00
3.20
2.90
3.00
3.10
E
4.65
4.90
5.15
4.70
4.90
5.10
E1
2.80
3.00
3.10
2.90
3.00
3.10
e
L
0.65
0.40
L1
k
ccc
Note:
Max.
0.60
0.65
0.80
0.40
0.95
0
0.15
0.70
0.95
8
0
0.10
8
0.10
TSSOP stands for thin shrink small outline package. Dimensions "D" and "E1" do not include mold flash or
protrusions. Mold flash or protrusions shall not exceed 0.15 mm per side.
Figure 22. MiniSO8 recommended footprint
DS4381 - Rev 9
page 13/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
TSSOP8 package information
3.4
TSSOP8 package information
Figure 23. TSSOP8 package outline
aaa
Table 8. TSSOP8 package mechanical data
Dimensions
Millimeters
Symbol
Min.
Typ.
A
Max.
Min.
Typ.
1.2
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
1.05
0.031
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.008
D
2.90
3.00
3.10
0.114
0.118
0.122
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.177
e
DS4381 - Rev 9
Inches
1.00
0.65
k
0°
L
0.45
0.60
0.006
0.039
0.041
0.0256
8°
0°
0.75
0.018
8°
0.024
L1
1
0.039
aaa
0.1
0.004
0.030
page 14/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
SO14 package information
3.5
SO14 package information
Figure 24. SO14 package outline
Table 9. SO14 package mechanical data
Dimensions
Millimeters
Symbol
Min.
Typ.
Max.
Min.
Typ.
Max.
D
8.55
8.75
0.336
0.344
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
0.68
0.026
A
1.75
0.068
a1
0.1
0.2
a2
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
DS4381 - Rev 9
Inches
0.5
0.019
c1
45° (typ.)
S
8° (max.)
page 15/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
TSSOP14 package information
3.6
TSSOP14 package information
Figure 25. TSSOP14 package outline
Table 10. TSSOP14 package mechanical data
Dimensions
Millimeters
Symbol
Min.
Typ.
A
Max.
Min.
Typ.
1.2
A1
0.05
A2
0.8
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.9
5
5.1
0.193
0.197
0.201
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
e
DS4381 - Rev 9
Inches
1
0.65 BSC
K
0°
L1
0.45
0.60
0.0256 BSC
8°
0°
0.75
0.018
8°
0.024
0.030
page 16/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Ordering information
4
Ordering information
Table 11. Order codes
Order code
Channels
Enhanced Vio
TSV321RAILT
1
●
TSV321RILT
1
TSV358AIST
2
TSV358IST
2
TSV358IPT
2
TSV358AIDT
2
TSV358IDT
Temperature range
Package
Marking
SOT23-5
K178
SOT23-5
K174
MiniSO8
K184
MiniSO8
K175
TSSOP8
V358I
SO8
V358AI
2
SO8
V358ID
TSV324IPT
4
TSSOP14
V324IP
TSV324IDT
4
SO14
V324ID
TSV321RAIYLT
1
SOT23-5
K187
TSV321RIYLT
1
SOT23-5
K179
TSV358AIYPT
2
TSSOP8
V58AY
TSV358IYPT
2
TSSOP8
V358Y
TSV358AIYDT
2
SO8
V358AY
TSV358IYDT
2
SO8
TV358Y
TSV324AIYPT
4
TSSOP14
V324AY
TSV324IYPT
4
TSSOP14
TSV324Y
TSV324AIYDT
4
TSV324IYDT
4
●
-40 °C to 125 °C
●
●
●
●
●
●
-40 °C to 125 °C
automotive grade (1)
SO14
V324AY
SO14
V324YD
1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according
to AEC Q001 & Q 002 or equivalent.
DS4381 - Rev 9
page 17/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Revision history
Table 12. Document revision history
Date
Revision
2-Aug-2005
1
Changes
First release - Products in full production.
Addition of TS321A/TS324A/TS358A data in tables in Section 2:
20-Sep-2005
2
"Electrical characteristics".
Minor formatting and grammatical changes.
7-Dec-2005
3
Missing PPAP references inserted see Section 4: "Ordering information".
Correction made on output drive capability, 80 mA in description on cover page.
SVR measurement conditions inserted in electrical characteristics tables.
Offset voltage limit in temperature added in Section 2: "Electrical characteristics".
28-Jun-2007
4
Correction made on Input Bias Current typical value in Section 2: "Electrical
characteristics".
Captions of electrical characteristics figures updated.
Automotive grade order codes added to Section 4: "Ordering information".
Corrected SO-14 Rthja value to 105 °C/W.
21-Feb-2008
5
Updated presentation of package information.
Corrected footnote for automotive grade order codes in order code table.
Updated Features (added SO-8, SO-14, TSSOP8, TSSOP14, and MiniSO-8 package).
Updated “Pin connection” figure on page 1 (removed part numbers).
13-Sep-2012
6
Removed TSV321ID, TSV321AID, TSV321IYDT, TSV358ID, TSV358AID, TSV324ID,
TSV324AID, TSV321IYD, TSV358IYD, TSV358AIYD, TSV321IYD, TSV324IYD, and
TSV324AIYD order code from Table 11: "Order codes".
Qualified status of TSV324AIYPT, TSV324IYPT, TSV324IYDT, TSV324AIYDT,
TSV358IYDT, TSV321RIYLT, TSV321RAIYLT, and TSV358AIYDT order code in Table
11: "Order codes".
Updated ECOPACK text in Section 3: "Package information".
Minor corrections throughout document.
Updated Features
Added Related products
16-Aug-2013
7
Table 3 and Table 4: replaced ΔVio with ΔVio/ΔT
Table 11: "Order codes": order code TSV321IDT renamed TSV321AIDT, added order
code TSV358AIDT, updated footnote associated with order codes TSV358IYPT and
TSV358AIYPT.
Added part numbers TSV321A, TSV358A, and TSV324A.
27-JUN-2014
8
Table 6: "SO8 package mechanical data": added L1 dimensions
Table 11: "Order codes": removed “tube” from all packaging
Updated disclaimer
24-Nov-2021
DS4381 - Rev 9
9
Updated Table 11. Order codes.
page 18/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
Contents
Contents
1
Absolute maximum ratings and operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4
3.1
SOT23-5 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.2
SO8 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.3
MiniSO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.4
TSSOP8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.5
SO14 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.6
TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
DS4381 - Rev 9
page 19/20
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2021 STMicroelectronics – All rights reserved
DS4381 - Rev 9
page 20/20