TSV324

TSV321-TSV358-TSV324 General purpose input/output rail-to-rail low power operational amplifiers Features ■ ■ ■ ■ ■ ■ ■ Pin connections (top view) TSV321RILT (SOT23-5) Output VDD Non Inverting Input 1 2 3 4 Inverting Input 5 VCC Operating range VCC = 2.5V to 6V Rail-to-rail input and output Extended Vicm (VDD - 0.2V to VCC + 0.2V) Capable of driving a 32Ω load resistor High stability: 500pF Available in SOT23-5 micropackage Operating temperature range: -40°C, +125°C TSV321ID-TSV321IDT (SO-8) N.C. Inverting Input Non Inverting Input VDD 1 2 3 4 _ + 8 7 6 5 N.C. VCC Output N.C. Applications ■ ■ ■ ■ Battery-powered applications Audio driver (headphone driver) Sensor signal conditioning Laptop/notebook computers Description The TSV358 and TSV324 (dual and quad) are low voltage versions of LM358 and LM324 commodity operational amplifiers. TSV321 is the single version. The TSV321/358/324 are able to operate with voltages as low as 2.5V and feature both I/O rail-to-rail. The common mode input voltage extends 200mV at 25°C beyond the supply voltages while the output voltage swing is within 100mV of each rail with 600 Ohm load resistor. At VCC = 3V, these devices offer 1.3MHz of gain-bandwidth product and provide high output drive capability typically at 80mA-load. These features make the TSV3xx family ideal for active filters, general purpose low-voltage applications, and general purpose portable devices. TSV358IST-TSV358ID-TSV358IDT-TSV358IPT (SO-8, miniSO-8, TSSOP8) Output 1 Inverting Input 1 Non Inverting Input 1 VDD 1 2 3 4 _ + _ + 8 7 6 5 VCC Output 2 Inverting Input 2 Non Inverting Input 2 TSV324ID-TSV324IDT-TSV324IPT (SO-14, TSSOP14) Output 1 Inverting Input 1 Non Inverting Input 1 VCC Non Inverting Input 2 Inverting Input 2 Output 2 1 2 3 4 5 6 7 + _ + _ _ + _ + 14 Output 4 13 Inverting Input 4 12 Non Inverting Input 4 11 VDD 10 Non Inverting Input 3 9 8 Inverting Input 3 Output 3 June 2007 Rev 4 1/19 www.st.com 19 Contents TSV321-TSV358-TSV324 Contents 1 2 3 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.1 3.2 3.3 3.4 3.5 3.6 SO-8 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 TSSOP8 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 MiniSO-8 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SO-14 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 TSSOP14 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 SOT23-5 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4 5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 TSV321-TSV358-TSV324 Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1. Symbol VCC Vid Vin Tstg Tj Supply voltage (1) Differential input voltage Input voltage Storage temperature Maximum junction temperature Thermal resistance junction to SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 MiniSO-8 ambient(3) (4) 250 125 103 120 100 190 81 40 31 37 32 39 2 200 (7) (2) Absolute maximum ratings Parameter Value 7 ±1 VDD-0.3 to VCC +0.3 -65 to +150 150 Unit V V V °C °C °C/W Rthja Rthjc Thermal resistance junction to case SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 MiniSO-8 HBM: human body model(5) °C/W kV V kV mA °C (8) ESD MM: machine model (6) CDM: charged device model Latch-up immunity 1.5 200 250 See note Lead temperature (soldering, 10s) Output short-circuit duration 1. All voltages values, except differential voltage are with respect to network terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1V, the maximum input current must not exceed ±1mA. When Vid > ±1V, an input series resistor must be added to limit input current. 3. Short-circuits can cause excessive heating and destructive dissipation. 4. Rth are typical values. 5. Human body model: 100pF discharged through a 1.5kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 6. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5Ω), done for all couples of pin combinations with other pins floating. 7. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. 8. Short-circuits from the output to VCCcan cause excessive heating. The maximum output current is approximately 80mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. 3/19 Absolute maximum ratings and operating conditions Table 2. Symbol VCC Vicm Toper Supply voltage Common mode input voltage range Top = 25°C, 2.5 ≤ VCC ≤ 6V Tmin < Top < Tmax, 2.5 ≤ VCC ≤ 5.5V Operating free air temperature range TSV321-TSV358-TSV324 Operating conditions Parameter Value 2.5 to 6 VDD - 0.2 to VCC + 0.2 VDD to VCC -40 to + 125 Unit V V °C 4/19 TSV321-TSV358-TSV324 Electrical characteristics 2 Table 3. Symbol Electrical characteristics Electrical characteristics at VCC = +3V, VDD = 0V, RL, CL connected to VCC/2, and Tamb = 25°C (unless otherwise specified) Parameter Test conditions Vicm = Vout = VCC /2 TSV321/358/324 Tmin < Top < Tmax TSV321A/358A/324A Tmin < Top < Tmax Min. Typ. Max. Unit 0.2 0.1 2 Vio Input offset voltage 3 6 1 3 mV ΔVio Iio Iib CMR Input offset voltage drift Input offset current (1) Input bias current (1) Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain Vicm = Vout = VCC /2 Tmin ≤ Tamb ≤ Tmax Vicm = Vout = VCC /2 Tmin ≤ Tamb ≤ Tmax 0 ≤ Vicm ≤ VCC, Vout = VCC /2 Vout = 0.5V to 2.5V RL = 2kΩ RL = 600Ω Vid = 100mV RL = 2kΩ RL = 600Ω Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ Tmin ≤ Tamb ≤ Tmax, RL = 600Ω Vid = -100mV RL = 2kΩ RL = 600Ω Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ Tmin ≤ Tamb ≤ Tmax, RL = 600Ω Vid = 100mV, VO = VDD Vid = -100mV, VO = VCC AVCL = 1, no load Tmin ≤ Tamb ≤ Tmax RL = 10kΩ CL = 100pF, f = 100kHz , , RL = 10kΩ CL = 100pF CL = 100pF 1 0.42 20 20 60 μV/°C 30 60 125 150 nA nA dB 3 40 80 Avd 80 74 2.82 2.80 2.82 2.80 92 95 2.95 2.95 dB VOH High level output voltage V VOL Low level output voltage 88 115 120 160 120 160 mV Output source current Io ICC GBP SR φm en THD Output sink current Supply current (per amplifier) Gain bandwidth product Slew rate Phase margin Input voltage noise Total harmonic distortion 80 mA 80 420 1.3 0.6 53 27 0.01 650 690 μA MHz V/μs Degrees nV/√ Hz % 1. Maximum values include unavoidable inaccuracies of the industrial tests. 5/19 Electrical characteristics Table 4. Symbol TSV321-TSV358-TSV324 Electrical characteristics at VCC = +5V, VDD = 0V, RL, CL connected to VCC/2, and Tamb = 25°C (unless otherwise specified) Parameter Conditions Vicm = Vout = VCC /2 TSV321/358/324 Tmin < Top < Tmax TSV321A/358A/324A Tmin < Top < Tmax Min. Typ. Max. Unit 0.2 0.1 2 Vio Input offset voltage 3 6 1 3 mV ΔVio Iio Iib CMR SVR Input offset voltage drift Input offset current (1) Input bias current (1) Common mode rejection ratio 20 log (ΔVic/ΔVio) Supply voltage rejection ratio 20 log (ΔVCC/ΔVio) Large signal voltage gain Vicm = Vout = VCC /2 Tmin ≤ Tamb ≤ Tmax Vicm = Vout = VCC /2 Tmin ≤ Tamb ≤ Tmax 0 ≤ Vicm ≤ VCC, Vout = VCC /2 VCC = 2.5 to 5V Vout = 0.5V to 4.5V RL = 2kΩ RL = 600Ω Vid = 100mV RL = 2kΩ RL = 600Ω Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ Tmin ≤ Tamb ≤ Tmax, RL = 600Ω Vid = -100mV RL = 2kΩ RL = 600Ω Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ Tmin ≤ Tamb ≤ Tmax, RL = 600Ω Vid = 100mV, VO = VDD Vid = -100mV, VO = VCC AVCL = 1, no load Tmin ≤ Tamb ≤ Tmax RL = 10kΩ CL = 100pF, f = 100kHz , , RL = 10kΩ CL = 100pF CL = 100pF 1 0.42 20 20 65 70 μV/°C 30 60 130 150 nA nA dB dB 3 70 85 90 Avd 83 77 4.80 4.75 4.80 4.75 92 85 4.95 4.90 dB VOH High level output voltage V VOL Low level output voltage 88 115 130 188 130 188 mV Output source current Io ICC GBP SR φm en THD Output sink current Supply current (per amplifier) Gain bandwidth product Slew rate Phase margin Input voltage noise Total harmonic distortion 80 mA 80 500 1.4 0.6 55 27 0.01 835 875 μA MHz V/μs Degrees nV/√ Hz % 1. Maximum values include unavoidable inaccuracies of the industrial tests. 6/19 TSV321-TSV358-TSV324 Electrical characteristics Figure 1. 600 500 Supply current/amplifier vs. supply Figure 2. voltage 550 Supply current/amplifier vs. temperature Vcc = 5V Supply Current (µA) 500 Supply Current (µA) Vcc = 3V 450 400 350 300 250 -40 400 300 200 100 0 0 2 4 Supply Voltage (V) 6 8 Tamb = 25°C -20 0 20 40 60 80 100 120 140 Temperature (°C) Figure 3. Output power vs. supply voltage Figure 4. 200 Input offset voltage drift vs. temperature 60 RL = 32 ohms 50 Output Power (mW) 1% distortion 40 30 0.1% distortion 20 10 10% distortion Input Voltage Drift (µV) 150 100 50 0 -50 -100 Vcc = 5V Vcc = 3V 0 1 2 3 4 5 6 Supply Voltage (V) -150 -40 -20 0 20 40 60 80 100 120 140 Temperature (°C) Figure 5. 10.0 Input bias current vs. temperature Figure 6. 110 Open loop gain vs. temperature at VCC= 5V Vcc = 5V Vicm = 2.5V RL = 2 kOhms Vcc = 3V Vicm = 1.5V Input bias current (nA) 0.0 -10.0 Open Loop Gain (dB) 100 90 RL = 600 ohms -20.0 80 -30.0 -40.0 -40 -20 0 20 40 60 80 100 Temperature (°C) 120 140 70 -40 -20 0 20 40 60 80 100 120 140 Temperature (°C) 7/19 Electrical characteristics TSV321-TSV358-TSV324 Figure 7. 110 Open loop gain vs. temperature at VCC= 3V Vcc = 3V Vicm = 1.5V Figure 8. 110 Voltage Referenced to VCC (mV) High level output voltage vs. temperature RL = 600 ohms RL = 2 kOhms 100 90 80 70 60 50 40 -40 Vcc = 5V Open Loop Gain (dB) 100 Vcc = 3V 90 RL = 600 Ohms 80 70 -40 -20 0 20 40 60 80 100 120 140 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) Figure 9. 110 Voltage Referenced to Gnd (mV) Low level output voltage vs. temperature RL = 600 ohms Figure 10. Output current vs. temperature at VCC= 5V 100 100 90 80 Vcc = 3V 70 60 50 40 -40 -100 Isink Vcc = 5V Output Current (mA) 50 Vcc = 5V Vid = 1V 0 -50 Isource -20 0 20 40 60 80 100 120 140 -40 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) Figure 11. Output current vs. temperature at VCC= 3V 100 Isink Figure 12. Output current vs. output voltage at VCC= 5V 100 T = -40 °C sink T = 125 °C Vcc = 5V Vid = 0.1V Vicm = 2.5V T = 125 °C -50 T = 25 °C T = -40 °C source 2.0 3.0 Output Voltage (V) 4.0 5.0 T = 25 °C Vcc = 3V Vid = 1V 0 Isource -50 Output Current (mA) 60 80 100 120 140 Output Current (mA) 50 50 0 -100 -40 -20 0 20 40 Temperature (°C) -100 0.0 1.0 8/19 TSV321-TSV358-TSV324 Electrical characteristics Figure 13. Output current vs. output voltage at Figure 14. Gain and phase vs. frequency at VCC= 3V VCC= 5V 100 T = -40 °C T = 25 °C Output Current (mA) 50 sink T = 125 °C 70 60 50 Gain (dB) RL = 10K CL = 100 pF Vcc = 5V 180 160 140 Phase (°) 120 gain phase 100 80 60 40 1E+4 1E+5 1E+6 Frequency (Hz) 0 T = 125 °C -50 T = 25 °C T = -40 °C -100 0.0 0.5 1.0 Vcc = 3V Vid = 0.1V Vicm = 1.5V 40 30 20 10 source 1.5 2.0 2.5 3.0 3.5 0 1E+3 Output Voltage (V) v Figure 15. Gain and phase vs. frequency at VCC= 3V 70 60 50 Gain (dB) 40 gain 30 20 10 0 1E+3 phase 100 80 60 40 1E+4 1E+5 Frequency (Hz) 1E+6 RL = 10K CL = 100 pF Vcc = 3V 180 160 140 Phase (°) Phase (°) 120 Figure 16. Slew rate vs. temperature at VCC= 5V 0.75 0.70 Slew Rate (V/µs) 0.65 0.60 0.55 0.50 0.45 0.40 0.35 -40 Vcc = 5V gain = +1 Vin = 2 to 3V RL = 10kohms CL = 100 pF positive Slew Rate negative Slew Rate -20 0 20 40 60 80 100 120 140 Temperature (°C) Figure 17. Slew rate vs. temperature at VCC= 3V 0.70 0.65 Slew Rate (V/µs) 0.60 0.55 0.50 0.45 0.40 0.35 -40 Vcc = 3V gain = +1 Vin = 1 to 2V RL = 10kohm CL = 100 pF positive Slew Rate Figure 18. Distortion vs. frequency 0.150 0.125 0.100 0.075 0.050 0.025 0.000 1E+1 Vcc = 3V Vout = 1Vpp RL = 32 ohms gain = -1 negative Slew Rate -20 0 20 40 60 80 100 120 140 Distortion (%) 1E+2 1E+3 Frequency (Hz) 1E+4 1E+5 Temperature (°C) 9/19 Package information TSV321-TSV358-TSV324 3 Package information In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: www.st.com. 10/19 TSV321-TSV358-TSV324 Package information 3.1 SO-8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D H E1 e h L k ccc 0.25 0.40 1° 0.10 1.25 0.28 0.17 4.80 5.80 3.80 4.90 6.00 3.90 1.27 0.50 1.27 8° 0.10 0.010 0.016 1° 0.48 0.23 5.00 6.20 4.00 Millimeters Typ. Max. 1.75 0.25 0.004 0.049 0.011 0.007 0.189 0.228 0.150 0.193 0.236 0.154 0.050 0.020 0.050 8° 0.004 0.019 0.010 0.197 0.244 0.157 Min. Inches Typ. Max. 0.069 0.010 11/19 Package information TSV321-TSV358-TSV324 3.2 TSSOP8 package mechanical data ) Dimensions Ref. Min. A A1 A2 b c D E E1 e k L L1 aaa 0° 0.45 0.60 1 0.1 0.05 0.80 0.19 0.09 2.90 6.20 4.30 3.00 6.40 4.40 0.65 8° 0.75 0° 0.018 0.024 0.039 0.004 1.00 Millimeters Typ. Max. 1.2 0.15 1.05 0.30 0.20 3.10 6.60 4.50 0.002 0.031 0.007 0.004 0.114 0.244 0.169 0.118 0.252 0.173 0.0256 8° 0.030 0.039 Min. Inches Typ. Max. 0.047 0.006 0.041 0.012 0.008 0.122 0.260 0.177 12/19 TSV321-TSV358-TSV324 Package information 3.3 MiniSO-8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e K L L1 0° 0.40 0.55 0.05 0.78 0.25 0.13 2.90 4.75 2.90 0.10 0.86 0.33 0.18 3.00 4.90 3.00 0.65 6° 0.70 0.10 0° 0.016 0.022 Millimeters Typ. Max. 1.1 0.15 0.94 0.40 0.23 3.10 5.05 3.10 0.002 0.031 0.010 0.005 0.114 0.187 0.114 0.004 0.034 0.013 0.007 0.118 0.193 0.118 0.026 6° 0.028 0.004 Min. Inches Typ. Max. 0.043 0.006 0.037 0.016 0.009 0.122 0.199 0.122 13/19 Package information TSV321-TSV358-TSV324 3.4 SO-14 package mechanical data Dimensions Ref. Min. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 1.27 7.62 4.0 5.3 1.27 0.68 8° (max.) 0.149 0.181 0.019 8.75 6.2 0.35 0.19 0.5 45° (typ.) 0.336 0.228 0.050 0.300 0.157 0.208 0.050 0.026 0.344 0.244 0.1 Millimeters Typ. Max. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.003 Min. Inches Typ. Max. 0.068 0.007 0.064 0.018 0.010 14/19 TSV321-TSV358-TSV324 Package information 3.5 TSSOP14 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e K L 0° 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8° 0.75 0° 0.018 0.024 1 Millimeters Typ. Max. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8° 0.030 0.004 0.039 Min. Inches Typ. Max. 0.047 0.006 0.041 0.012 0.0089 0.201 0.260 0.176 A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 15/19 Package information TSV321-TSV358-TSV324 3.6 SOT23-5 package mechanical data Dimensions Ref. Min. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50 0.95 1.9 0.55 13.7 Millimeters Typ. Max. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 Min. 35.4 0.00 35.4 13.7 3.5 110.2 102.3 59.0 37.4 74.8 21.6 Mils Typ. Max. 57.1 5.9 51.2 19.7 7.8 118.1 118.1 68.8 16/19 TSV321-TSV358-TSV324 Ordering information 4 Table 5. Ordering information Order codes Temperature range Package Packaging Marking K174 SOT23-5 Tape & reel K178 SOT23-5 (Automotive grade level) SO-8 SO-8 (Automotive grade level) SO-8 K179 Tape & reel K187 Tube or tape & reel Tube or tape & reel Tube or tape & reel Tube or tape & reel Tube or tape & reel Tape & reel V358A V358Y Tape & reel V58AY K175 MiniSO-8 Tape & reel K184 SO-14 Tube or tape & reel Tube or tape & reel V324AY TSSOP14 (Thin shrink outline package) TSSOP14 (Automotive grade level) V324IP Tape & reel V324A V324AY Tape & reel V324Y V324ID V324AI V324YD SO-14 (Automotive grade level) V321ID V321Y V321AI V358ID V358AID V358YD V358AY V358I Part number TSV321RILT TSV321RAILT TSV321RIYLT (1) TSV321RAIYLT(1) TSV321ID/IDT TSV321IYD/IYDT(1) TSV321AID/IDT TSV358ID/IDT SO-8 TSV358AID/IDT TSV358IYD/IYDT (1) (1) TSV358AIYD/AIYDT TSV358IPT TSV358AIPT TSV358IYPT (1) SO-8 (Automotive grade level) -40°C to +125°C TSSOP8 (Thin shrink outline package) TSSOP8 (Automotive grade level) TSV358AIYPT(1) TSV358IST TSV358AIST TSV324ID/IDT TSV324AID/AIDT TSV324IYD/IYDT(1) TSV324AIYD/AIYDT(1) TSV324IPT TSV324AIPT TSV324AIYPT(1) TSV324IYPT (1) 1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent. 17/19 Revision history TSV321-TSV358-TSV324 5 Revision history Date 2-Aug-2005 20-Sep-2005 Revision 1 2 Changes First release - Products in full production. Addition of TS321A/TS324A/TS358A data in tables in Section 2: Electrical characteristics on page 5. Minor formatting and grammatical changes. Missing PPAP references inserted see Section 4: Ordering information on page 17. Correction made on output drive capability, 80mA in description on cover page. SVR measurement conditions inserted in electrical characteristics tables. Offset voltage limit in temperature added in Section 2: Electrical characteristics on page 5. Correction made on Input Bias Current typical value in Section 2: Electrical characteristics on page 5. Captions of electrical characteristics figures updated. Automotive grade order codes added to Section 4: Ordering information on page 17. 7-Dec-2005 3 28-Jun-2007 4 18/19 TSV321-TSV358-TSV324 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 19/19