TSV324IYPT

TSV321, TSV358, TSV324 TSV321A, TSV358A, TSV324A Datasheet General purpose input/output rail-to-rail low-power operational amplifiers Pin connections (top view) SOT23-5 SO8 Features • Operating range VCC = 2.5 V to 6 V • • Rail-to-rail input and output Extended Vicm (VDD - 0.2 V to VCC + 0.2 V) • • • Capable of driving a 32 Ω load resistor High stability: 500 pF Operating temperature range: -40 to 125 °C Applications SO8, MiniSO8, TSSOP8 SO14, TSSOP14 • • • • Battery powered applications Audio driver (headphone driver) Sensor signal conditioning Laptop/notebook computers Description The TSV358, TSV358A, TSV324, and TSV324A (dual and quad) devices are low voltage versions of the LM358 and LM324 commodity operational amplifiers. The TSV321 and TSV321A are the single version. All devices operate with voltages as low as 2.5 V and feature both I/O rail-to-rail. Maturity status link TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A The common mode input voltage extends 200 mV beyond the supply voltages at 25 °C while the output voltage swing is within 100 mV of each rail with a 600 Ω load resistor. At VCC = 3 V, these devices offer 1.3 MHz of gain bandwidth product and provide high output current capability with a typical value of 80 mA. These features make the TSV3xx and TSV3xxA family ideal for active filters, general purpose low voltage applications, and general purpose portable devices. Related products LMV321L, LMV358L, LMV324L for newer technology version TSV851, TSV852, TSV854 for enhanced performances DS4381 - Rev 9 - November 2021 For further information contact your local STMicroelectronics sales office. www.st.com TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter Value VCC Supply voltage (1) 7 Vid Differential input voltage (2) ±1 Vin Input voltage Tstg Storage temperature Tj Rthja Rthjc Thermal resistance junction-to-case(3) -65 to +150 150 SOT23-5 250 SO8 125 MiniSO8 190 TSSOP8 120 SO14 105 TSSOP14 100 SOT23-5 81 SO8 40 MiniSO8 39 TSSOP8 37 SO14 31 TSSOP14 32 HBM: human body model (4) ESD V VDD -0.3 to VCC +0.3 Maximum junction temperature Thermal resistance junction-to-ambient (3) Unit °C °C/W 2 kV MM: machine model (5) 200 V CDM: charged device model (6) 1.5 kV Latch-up immunity 200 mA Lead temperature (soldering, 10 s) 250 °C Output short-circuit duration See (7) 1. All voltage values, except the differential voltage are with respect to the network terminal. 2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1 V, the maximum input current must not exceed ±1 mA. When Vid > ±1 V, an input series resistor must be added to limit input current. 3. Short-circuits can cause excessive heating and destructive dissipation. Rth are typical values. 4. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating. 6. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to ground. 7. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 80 mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. DS4381 - Rev 9 page 2/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Absolute maximum ratings and operating conditions Table 2. Operating conditions Symbol Parameter VCC Supply voltage Vicm Common mode input voltage range Toper Operating free air temperature range DS4381 - Rev 9 Tamb = 25 °C, 2.5 ≤ VCC ≤ 6 V Tmin < Tamb < Tmax, 2.5 ≤ VCC ≤ 5.5 V Value Unit 2.5 to 6 V VDD - 0.2 to VCC + 0.2 VDD to VCC -40 to + 125 V °C page 3/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Electrical characteristics 2 Electrical characteristics Table 3. Electrical characteristics at VCC = +3 V, VDD = 0 V, RL, CL connected to VCC/2, and Tamb = 25 °C (unless otherwise specified) Symbol Parameter Test conditions Min. Typ. Max. 0.2 3 Unit Vicm = Vout = VCC /2 TSV321/358/324 Vio Input offset voltage Tmin ≤ Tamb ≤ Tmax 6 TSV321A/358A/324A 0.1 Tmin ≤ Tamb ≤ Tmax ΔVio/ΔT Iio Iib CMR Avd VOH VOL Io ICC GBP Input bias current Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain High level output voltage, VOH = Vout Low level output voltage Vicm = Vout = VCC /2 (1) 3 Tmin ≤ Tamb ≤ Tmax Vicm = Vout = VCC 40 Tmin ≤ Tamb ≤ Tmax 0 ≤ Vicm ≤ VCC, Vout = VCC /2 60 80 Vout = 0.5 V to 2.5 V, RL = 2 kΩ 80 92 Vout = 0.5 V to 2.5 V, RL = 600 Ω 74 95 Vid = 100 mV, RL = 2 kΩ 2.82 2.95 Vid = 100 mV, RL = 600 Ω 2.80 2.95 Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 2.82 Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω 2.80 88 120 Vid = -100 mV, RL = 600 Ω 115 160 Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 120 Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω 160 Vid = -100 mV, VO = VCC 20 80 Phase margin en Input voltage noise dB Vid = -100 mV, RL = 2 kΩ Output sink current ɸm nA 125 V 80 Slew rate 30 150 20 Gain bandwidth product µV/°C 60 /2(1) Vid = 100 mV, VO = VDD SR THD 2 Output source current Supply current (per amplifier) 1 3 Input offset voltage drift Input offset current mV AVCL = 1, no load 420 Tmin ≤ Tamb ≤ Tmax mV mA 650 690 µA RL = 10 kΩ, CL = 100 pF, f = 100 kHz 1 1.3 MHz RL = 10 kΩ, CL = 100 pF 0.42 0.6 V/µs 53 Degrees 27 nV/√ Hz 0.01 % CL = 100 pF Total harmonic distortion 1. Maximum values include unavoidable inaccuracies of the industrial tests. DS4381 - Rev 9 page 4/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Electrical characteristics Table 4. Electrical characteristics at VCC = +5 V, VDD = 0 V, RL, CL connected to VCC/2, and Tamb = 25 °C (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. 0.2 3 Unit Vicm = Vout = VCC /2 TSV321/358/324 Vio Input offset voltage Tmin ≤ Tamb ≤ Tmax 6 TSV321A/358A/324A 0.1 Tmin ≤ Tamb ≤ Tmax ΔVio/ΔT Iio Iib Input bias current 2 Vicm = Vout = VCC /2 (1) 3 Tmin ≤ Tamb ≤ Tmax Vicm = Vout = VCC /2(1) 70 Tmin ≤ Tamb ≤ Tmax 0 ≤ Vicm ≤ VCC, Vout = VCC /2 65 85 SVR Supply voltage rejection ratio 20 log (ΔVCC/ΔVio) VCC = 2.5 V to 5 V 70 90 Avd Large signal voltage gain Vout = 0.5 V to 4.5 V, RL = 2 kΩ 83 92 Vout = 0.5 V to 4.5 V, RL = 600 Ω 77 85 Vid = 100 mV, RL = 2 kΩ 4.80 4.95 Vid = 100 mV, RL = 600 Ω 4.75 4.90 Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 4.80 Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω 4.75 VOL Io ICC GBP Low level output voltage 130 Vid = -100 mV, RL = 600 Ω 115 188 Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 130 Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω 188 80 Output sink current Vid = -100 mV, VO = VCC 20 80 Slew rate ɸm Phase margin en Input voltage noise THD 88 20 SR dB Vid = -100 mV, RL = 2 kΩ Vid = 100 mV, VO = VDD Gain bandwidth product nA 130 V Output source current Supply current (per amplifier) 30 150 Common mode rejection ratio 20 log (ΔVic/ΔVio) High level output voltage, VOH = Vout µV/°C 60 CMR VOH 1 3 Input offset voltage drift Input offset current mV AVCL = 1, no load 500 Tmin ≤ Tamb ≤ Tmax mV mA 835 875 µA RL = 10 kΩ, CL = 100 pF, f = 100 kHz 1 1.4 MHz RL = 10 kΩ, CL = 100 pF 0.42 0.6 V/µs 55 Degrees 27 nV/√ Hz 0.01 % CL = 100 pF Total harmonic distortion 1. Maximum values include unavoidable inaccuracies of the industrial tests. DS4381 - Rev 9 page 5/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Electrical characteristics Figure 1. Supply current/amplifier vs. supply voltage Figure 2. Supply current/amplifier vs. temperature Figure 3. Output power vs. supply voltage Figure 4. Input offset voltage drift vs. temperature Figure 5. Input bias current vs. temperature Figure 6. Open loop gain vs. temperature at VCC = 5 V DS4381 - Rev 9 page 6/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Electrical characteristics Figure 7. Open loop gain vs. temperature at VCC = 3 V Figure 8. High level output voltage vs. temperature Figure 9. Low level output voltage vs. temperature Figure 10. Output current vs. temperature at VCC = 5 V 100 -40 Figure 11. Output current vs. temperature at VCC = 3 V -20 0 20 40 60 80 100 120 140 Figure 12. Output current vs. output voltage at VCC = 5 V 100 -40 DS4381 - Rev 9 -20 0 20 40 60 80 100 120 140 page 7/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Electrical characteristics Figure 13. Output current vs. output voltage at VCC = 3 V Figure 14. Gain and phase vs. frequency at VCC = 5 V k Figure 15. Gain and phase vs. frequency at VCC = 3 V Figure 16. Slew rate vs. temperature at VCC = 5 V k Figure 17. Slew rate vs. temperature at VCC = 3 V DS4381 - Rev 9 Figure 18. Distortion vs. frequency page 8/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Package information 3 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. DS4381 - Rev 9 page 9/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A SOT23-5 package information 3.1 SOT23-5 package information Figure 19. SOT23-5 package outline Table 5. SOT23-5 package mechanical data Dimensions Millimeters Symbol Min. Max. Min. Typ. Max. A 0.90 1.45 35.4 57.1 A1 0.00 0.15 0.00 5.9 A2 0.90 1.30 35.4 51.2 b 0.35 0.50 13.7 19.7 C 0.09 0.20 3.5 7.8 D 2.80 3.00 110.2 118.1 E 2.60 3.00 102.3 118.1 E1 1.50 1.75 59.0 68.8 e 0.95 37.4 e1 1.9 74.8 L DS4381 - Rev 9 Typ. Mils 0.35 0.55 13.7 21.6 page 10/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A SO8 package information 3.2 SO8 package information Figure 20. SO8 package outline Table 6. SO-8 mechanical data Dim. mm Min. Inches Typ. A Min. Typ. 1.75 0.25 Max. 0.069 A1 0.1 A2 1.25 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.01 D 4.8 4.9 5 0.189 0.193 0.197 E 5.8 6 6.2 0.228 0.236 0.244 E1 3.8 3.9 4 0.15 0.154 0.157 e 0.004 0.01 0.049 1.27 0.05 h 0.25 0.5 0.01 0.02 L 0.4 1.27 0.016 0.05 L1 k ccc DS4381 - Rev 9 Max. 1.04 0 0.04 8° 0.1 1° 8° 0.004 page 11/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A MiniSO8 package information 3.3 MiniSO8 package information Figure 21. MiniSO8 package outline DS4381 - Rev 9 page 12/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A MiniSO8 package information Table 7. MiniSO8 package mechanical data Dim. Millimeters Min. Inches Typ. A Min. Typ. 1.10 A1 0 A2 0.75 A3 0.30 b Max. 1.10 0.15 0.05 0.85 0.95 0.75 0.85 0.95 0.35 0.40 0.30 0.35 0.40 0.22 0.40 0.28 0.36 c 0.08 0.23 0.15 0.19 D 2.80 3.00 3.20 2.90 3.00 3.10 E 4.65 4.90 5.15 4.70 4.90 5.10 E1 2.80 3.00 3.10 2.90 3.00 3.10 e L 0.65 0.40 L1 k ccc Note: Max. 0.60 0.65 0.80 0.40 0.95 0 0.15 0.70 0.95 8 0 0.10 8 0.10 TSSOP stands for thin shrink small outline package. Dimensions "D" and "E1" do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15 mm per side. Figure 22. MiniSO8 recommended footprint DS4381 - Rev 9 page 13/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A TSSOP8 package information 3.4 TSSOP8 package information Figure 23. TSSOP8 package outline aaa Table 8. TSSOP8 package mechanical data Dimensions Millimeters Symbol Min. Typ. A Max. Min. Typ. 1.2 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 2.90 3.00 3.10 0.114 0.118 0.122 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e DS4381 - Rev 9 Inches 1.00 0.65 k 0° L 0.45 0.60 0.006 0.039 0.041 0.0256 8° 0° 0.75 0.018 8° 0.024 L1 1 0.039 aaa 0.1 0.004 0.030 page 14/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A SO14 package information 3.5 SO14 package information Figure 24. SO14 package outline Table 9. SO14 package mechanical data Dimensions Millimeters Symbol Min. Typ. Max. Min. Typ. Max. D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 A 1.75 0.068 a1 0.1 0.2 a2 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C DS4381 - Rev 9 Inches 0.5 0.019 c1 45° (typ.) S 8° (max.) page 15/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A TSSOP14 package information 3.6 TSSOP14 package information Figure 25. TSSOP14 package outline Table 10. TSSOP14 package mechanical data Dimensions Millimeters Symbol Min. Typ. A Max. Min. Typ. 1.2 A1 0.05 A2 0.8 b Max. 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.9 5 5.1 0.193 0.197 0.201 E 6.2 6.4 6.6 0.244 0.252 0.260 E1 4.3 4.4 4.48 0.169 0.173 0.176 e DS4381 - Rev 9 Inches 1 0.65 BSC K 0° L1 0.45 0.60 0.0256 BSC 8° 0° 0.75 0.018 8° 0.024 0.030 page 16/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Ordering information 4 Ordering information Table 11. Order codes Order code Channels Enhanced Vio TSV321RAILT 1 ● TSV321RILT 1 TSV358AIST 2 TSV358IST 2 TSV358IPT 2 TSV358AIDT 2 TSV358IDT Temperature range Package Marking SOT23-5 K178 SOT23-5 K174 MiniSO8 K184 MiniSO8 K175 TSSOP8 V358I SO8 V358AI 2 SO8 V358ID TSV324IPT 4 TSSOP14 V324IP TSV324IDT 4 SO14 V324ID TSV321RAIYLT 1 SOT23-5 K187 TSV321RIYLT 1 SOT23-5 K179 TSV358AIYPT 2 TSSOP8 V58AY TSV358IYPT 2 TSSOP8 V358Y TSV358AIYDT 2 SO8 V358AY TSV358IYDT 2 SO8 TV358Y TSV324AIYPT 4 TSSOP14 V324AY TSV324IYPT 4 TSSOP14 TSV324Y TSV324AIYDT 4 TSV324IYDT 4 ● -40 °C to 125 °C ● ● ● ● ● ● -40 °C to 125 °C automotive grade (1) SO14 V324AY SO14 V324YD 1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent. DS4381 - Rev 9 page 17/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Revision history Table 12. Document revision history Date Revision 2-Aug-2005 1 Changes First release - Products in full production. Addition of TS321A/TS324A/TS358A data in tables in Section 2: 20-Sep-2005 2 "Electrical characteristics". Minor formatting and grammatical changes. 7-Dec-2005 3 Missing PPAP references inserted see Section 4: "Ordering information". Correction made on output drive capability, 80 mA in description on cover page. SVR measurement conditions inserted in electrical characteristics tables. Offset voltage limit in temperature added in Section 2: "Electrical characteristics". 28-Jun-2007 4 Correction made on Input Bias Current typical value in Section 2: "Electrical characteristics". Captions of electrical characteristics figures updated. Automotive grade order codes added to Section 4: "Ordering information". Corrected SO-14 Rthja value to 105 °C/W. 21-Feb-2008 5 Updated presentation of package information. Corrected footnote for automotive grade order codes in order code table. Updated Features (added SO-8, SO-14, TSSOP8, TSSOP14, and MiniSO-8 package). Updated “Pin connection” figure on page 1 (removed part numbers). 13-Sep-2012 6 Removed TSV321ID, TSV321AID, TSV321IYDT, TSV358ID, TSV358AID, TSV324ID, TSV324AID, TSV321IYD, TSV358IYD, TSV358AIYD, TSV321IYD, TSV324IYD, and TSV324AIYD order code from Table 11: "Order codes". Qualified status of TSV324AIYPT, TSV324IYPT, TSV324IYDT, TSV324AIYDT, TSV358IYDT, TSV321RIYLT, TSV321RAIYLT, and TSV358AIYDT order code in Table 11: "Order codes". Updated ECOPACK text in Section 3: "Package information". Minor corrections throughout document. Updated Features Added Related products 16-Aug-2013 7 Table 3 and Table 4: replaced ΔVio with ΔVio/ΔT Table 11: "Order codes": order code TSV321IDT renamed TSV321AIDT, added order code TSV358AIDT, updated footnote associated with order codes TSV358IYPT and TSV358AIYPT. Added part numbers TSV321A, TSV358A, and TSV324A. 27-JUN-2014 8 Table 6: "SO8 package mechanical data": added L1 dimensions Table 11: "Order codes": removed “tube” from all packaging Updated disclaimer 24-Nov-2021 DS4381 - Rev 9 9 Updated Table 11. Order codes. page 18/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A Contents Contents 1 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 3.1 SOT23-5 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.2 SO8 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3.3 MiniSO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.4 TSSOP8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.5 SO14 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.6 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 DS4381 - Rev 9 page 19/20 TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2021 STMicroelectronics – All rights reserved DS4381 - Rev 9 page 20/20