TSV6191AILT

TSV6191, TSV6191A, TSV6192, TSV6192A Rail-to-rail input/output 10 µA, 450 kHz CMOS operational amplifiers Datasheet - production data Description TSV6191ILT - TSV6191ICT VCC- 2 The TSV619x family of single and dual operational amplifiers offers low voltage, low power operation, and rail-to-rail input and output. 5 VCC+ In+ 1 +_ In- 3 4 Out The devices also feature an ultra-low input bias current as well as a low input offset voltage. SOT23-5/SC70-5 The TSV619x have a gain bandwidth product of 450 kHz while consuming only 10 µA at 5 V. They must be used in a gain configuration (equal or above 4 or -3). TSV6192IST - TSV6192IDT Out1 1 In1- 2 In1+ 3 VCC- 4 _ + 8 VCC+ 7 Out2 _ 6 In2- + 5 In2+ These features make the TSV619x family ideal for sensor interfaces, battery supplied and portable applications, as well as active filtering. MiniSO8/SO8 Features • Rail-to-rail input and output • Low power consumption: 10 µA typ at 5 V • Low supply voltage: 1.5 to 5.5 V • Gain bandwidth product: 450 kHz typ • Stable when used in gain configuration • Low input offset voltage: 800 µV max (A version) • Low input bias current: 1 pA typ • Temperature range: -40 to 85 °C Applications • Battery-powered applications • Smoke detectors • Proximity sensors • Portable devices • Signal conditioning • Active filtering • Medical instrumentation May 2017 This is information on a product in full production. DocID17974 Rev 2 1/18 www.st.com Contents TSV619x, TSV619xA Contents 1 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 3.1 Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.2 Rail-to-rail input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.3 Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.4 PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.5 Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.1 SOT23-5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.2 SC70-5 (SOT323-5) package information . . . . . . . . . . . . . . . . . . . . . . . . 13 4.3 SO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 MiniSO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 DocID17974 Rev 2 TSV619x, TSV619xA 1 Absolute maximum ratings and operating conditions Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol VCC Vid Parameter Supply voltage Value (1) 6 Differential input voltage (2) ±VCC (3) Vin Input voltage Tstg Storage temperature Tj -65 to 150 205 SOT23-5 250 MiniSO8 190 SO8 125 Maximum junction temperature MM: machine model (6) (7) CDM: charged device model °C (4) (5) SC70-5 HBM: human body model ESD V (VCC-) - 0.2 to (VCC+) + 0.2 Thermal resistance junction to ambient Rthja Unit (8) Latch-up immunity °C/W 150 °C 4 kV 200 V 1.5 kV 200 mA 1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. Vcc-Vin must not exceed 6 V. 4. Short-circuits can cause excessive heating and destructive dissipation. 5. Rth are typical values. 6. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 7. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating. 8. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to ground. Table 2. Operating conditions Symbol Parameter VCC Supply voltage Vicm Common mode input voltage range Toper Operating free air temperature range Value 1.5 to 5.5 DocID17974 Rev 2 (VCC-) - 0.1 to (VCC+) + 0.1 -40 to 85 Unit V °C 3/18 18 Electrical characteristics 2 TSV619x, TSV619xA Electrical characteristics Table 3. Electrical characteristics at VCC+ = 1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Vio Offset voltage TSV619x TSV619xA 4 0.8 5 2 Tmin. < Top < Tmax. TSV619x Tmin. < Top < TmaxTSV619xA ∆Vio/∆T Input offset voltage drift Iio Input offset current (Vout = Vcc/2) Iib Input bias current (Vout = Vcc/2) CMR Common mode rejection ratio 20 log (ΔVic/ΔVio) μV/°C 2 1 Tmin. < Top < Tmax. Tmin. < Top < Tmax. 0 V to 1.8 V, Vout = 0.9 V 55 Tmin. < Top < Tmax. 53 RL = 10 kΩ, Vout = 0.5 V to 1.3 V 78 Tmin. < Top < Tmax. 74 10 (1) 1 25 1 10 (1) 1 25 dB 83 Large signal voltage gain VOH High level output voltage (VOH = VCC - Vout) RL = 10 kΩ Tmin. < Top < Tmax. 4 35 50 Low level output voltage RL = 10 kΩ Tmin. < Top < Tmax. 7 35 50 Isink Vo = 1.8 V Tmin. < Top < Tmax. 9 9 13 Isource Vo = 0 V Tmin. < Top < Tmax. 8 8 10 6.5 9 Iout ICC Supply current (per operator) No load, Vout = Vcc/2 Tmin. < Top < Tmax. pA 71 Avd VOL mV 6 mV mA 12 12.5 µA AC performance GBP Gain bandwidth product RL = 10 kΩ, CL = 20 pF Gain Minimum gain for stability Phase margin = 60 °, Rf = 10kΩ, RL = 10 kΩ, CL = 20 pF, Top = 25 °C SR Slew rate en THD+N 380 kHz 5 V/V RL = 10 kΩ, CL = 20 pF, Vout = 0.5V to 1.3V 0.06 V/μs Equivalent input noise voltage f = 1 kHz 110 nV -----------Hz Total harmonic distortion + noise Fin = 1 kHz, Av = 5, Vout = 1 Vpp, RL = 100 kΩ, BW = 22 kHz 0.1 % 1. Guaranteed by design. 4/18 DocID17974 Rev 2 TSV619x, TSV619xA Electrical characteristics Table 4. Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit DC performance Vio Offset voltage TSV619x TSV619xA 4 0.8 5 2 Tmin