TSV634

TSV632, TSV633, TSV634, TSV635 Rail-to-rail input/output 60 µA 880 kHz operational amplifiers Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rail-to-rail input and output Low power consumption: 60 µA typ at 5 V Low supply voltage: 1.5 V - 5.5 V Gain bandwidth product: 880 kHz typ Unity gain stability Low power shutdown mode: 5 nA typ Low offset voltage: 800 µV max (A version) Low input bias current: 1 pA typ EMI hardened op-amps High tolerance to ESD: 4 kV HBM Extended temperature range: -40° C to +125° C SO-8 SOT23-8 MiniSO-8 Applications ■ ■ ■ ■ ■ Battery-powered applications Portable devices Signal conditioning Active filtering Medical instrumentation TSSOP-14 Description The TSV63x series of dual and quad operational amplifiers offers low voltage operation and rail-torail input and output. This family features an excellent speed/power consumption ratio, offering a 880 kHz gainbandwidth product while consuming only 60 µA at 5 V supply voltage. The devices also feature an ultra-low input bias current and have a shutdown mode (TSV633, TSV635). These features make the TSV63x family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering. TSSOP-16 June 2009 Doc ID 15688 Rev 2 1/26 www.st.com 26 Contents TSV63x Contents 1 2 3 4 Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Rail-to-rail input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Shutdown function (TSV633 - TSV635) . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Optimization of DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Driving resistive and capacitive loads . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.1 5.2 5.3 5.4 5.5 5.6 SOT23-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 MiniSO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 MiniSO-10 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 TSSOP16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 6 7 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 2/26 Doc ID 15688 Rev 2 TSV63x Package pin connections 1 Package pin connections Figure 1. Pin connections for each package (top view) Out1 Out1 In1In1+ VCC1 2 3 4 _ + _ + 8 7 6 5 VCC+ Out2 In2In2+ 1 2 3 4 5 _ + _ + 10 VCC+ 9 8 7 6 Out2 In2In2+ SHDN2 In1In1+ VCCSHDN1 TSV632IDT/IST/ILT SO8/Mini-SO8/SOT23-8 1 2 3 4 5 6 7 8 TSV633IST MiniSO-10 16 Out4 _ + _ + 15 In414 In4+ 13 VCC+ _ + _ 12 In3+ 11 In310 Out3 9 SHDN3/4 Out1 Out1 In1In1+ VCC+ In2+ In2Out2 1 2 3 4 5 6 7 + _ + _ _ + _ + 14 Out4 13 In412 In4+ 11 VCC10 In3+ In1In1+ VCC+ In2+ In2- 9 8 In3Out2 Out3 SHDN1/2 TSV634IPT TSSOP14 TSV635IPT TSSOP16 Doc ID 15688 Rev 2 3/26 Absolute maximum ratings and operating conditions TSV63x 2 Absolute maximum ratings and operating conditions Table 1. Symbol VCC Vid Vin Iin SHDN Tstg Supply voltage (1) (2) Absolute maximum ratings (AMR) Parameter Value 6 ±VCC VCC- - 0.2 to VCC++ 0.2 10 (3) Unit V V V mA V °C Differential input voltage Input voltage Input current (3) (4) Shutdown voltage VCC- - 0.2 to VCC++ 0.2 -65 to +150 ambient(5)(6) 105 190 125 113 100 95 150 4 300 1.5 200 Storage temperature Thermal resistance junction to SOT23-8 MiniSO-8 SO-8 MiniSO-10 TSSOP14 TSSOP16 model(7) model(9) Rthja °C/W Tj ESD Maximum junction temperature HBM: human body MM: machine model(8) °C kV V kV mA CDM: charged device Latch-up immunity 1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. VCC-Vin must not exceed 6 V, Vin must not exceed 6V. 4. Input current must be limited by a resistor in series with the inputs. 5. Short-circuits can cause excessive heating and destructive dissipation. 6. Rth are typical values. 7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 8. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating. 9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. Table 2. Symbol VCC Vicm Toper Operating conditions Parameter Supply voltage Common mode input voltage range Operating free air temperature range Value 1.5 to 5.5 VCC- - 0.1 to VCC+ + 0.1 -40 to +125 Unit V V °C 4/26 Doc ID 15688 Rev 2 TSV63x Electrical characteristics 3 Table 3. Symbol Electrical characteristics Electrical characteristics at VCC+ = +1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Parameter Conditions Min. Typ. Max. Unit DC performance TSV63x TSV63xA TSV633AIST - MiniSO10 Vio Offset voltage Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST Input offset voltage drift Input offset current (Vout = VCC/2) Input bias current (Vout = VCC/2) Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain 2 1 Tmin < Top < Tmax 1 1 Tmin < Top < Tmax 0 V to 1.8 V, Vout = 0.9 V Tmin < Top < Tmax RL= 10 kΩ Vout = 0.5 V to 1.3 V , Tmin < Top < Tmax High level output voltage Low level output voltage RL = 10 kΩ Tmin < Top < Tmax RL = 10 kΩ Tmin < Top < Tmax Vo = 1.8 V Tmin < Top < Tmax Vo = 0 V Tmin < Top < Tmax No load, Vout = VCC/2 Tmin < Top < Tmax 6 4 6 4 40 50 60 62 µA µA 10 mA 53 51 85 80 35 50 5 4 12 mA 35 50 95 1 74 10 (1) 3 0.8 1 4.5 2 2.2 mV mV μV/°C pA pA pA pA dB dB dB dB mV mV DVio Iio 100 10 (1) Iib 100 CMR Avd VOH VOL Isink Iout Isource Supply current (per operator) ICC AC performance GBP φm Gm SR en Gain bandwidth product Phase margin Gain margin Slew rate Equivalent input noise voltage RL = 2 kΩ CL = 100 pF, f = 100 kHz , RL = 2 kΩ, CL = 100 pF RL = 2 kΩ, CL = 100 pF RL = 2 kΩ, CL = 100 pF, Av = 1 f = 1 kHz f = 10 kHz 0.2 700 790 45 13 0.27 60 33 kHz Degrees dB V/μs nV ----------Hz 1. Guaranteed by design. Doc ID 15688 Rev 2 5/26 Electrical characteristics Table 4. Symbol DC performance SHDN = VCCICC Supply current in shutdown mode (all operators) Tmin < Top < 85° C Tmin < Top < 125° C ton toff VIH VIL IIH IIL IOLeak Amplifier turn-on time Amplifier turn-off time SHDN logic high SHDN logic low SHDN current high SHDN current low SHDN = VCC+ SHDN = VCC10 10 50 1 RL= 2 kΩ , Vout = VCC- to VCC-+0.2 V RL = 2 kΩ , Vout = VCC+ - 0.5 V to VCC+ - 0.7 V 1.35 0.6 200 20 2.5 50 200 1.5 TSV63x Shutdown characteristics VCC = 1.8 V Parameter Conditions Min. Typ. Max. Unit nA nA µA ns ns V V pA pA pA nA Output leakage in shutdown SHDN = VCCmode Tmin < Top < 125° C 6/26 Doc ID 15688 Rev 2 TSV63x Table 5. Symbol DC performance TSV63x TSV63xA TSV633AIST - MiniSO10 Vio Offset voltage Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST Input offset voltage drift Input offset current Tmin < Top < Tmax Input bias current Tmin < Top < Tmax Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain 0 V to 3.3 V, Vout = 1.65 V Tmin < Top < Tmax RL = 10 kΩ Vout = 0.5 V to 2.8 V , Tmin < Top < Tmax High level output voltage Low level output voltage RL = 10 kΩ Tmi. < Top < Tmax RL = 10 kΩ Tmin < Top < Tmax Vo = 3.3 V Tmin < Top < Tmax Vo = 0 V Tmin < Top < Tmax No load, Vout = 1.75 V Tmin < Top < Tmax 23 20 23 20 43 57 53 88 83 35 50 Electrical characteristics VCC+ = +3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) Parameter Conditions Min. Typ. Max. Unit 3 0.8 1 4.5 2 2.2 2 1 10(1) 100 10(1) 100 mV mV μV/°C pA pA pA pA dB DVio Iio 1 1 Iib 1 79 CMR 98 dB 5 4 45 mA 38 mA 55 64 66 µA µA 35 50 Avd VOH VOL mV mV Isink Iout Isource Supply current (per operator) ICC AC performance GBP φm Gm SR Gain bandwidth product Phase margin Gain margin Slew rate RL = 2 kΩ CL = 100 pF, , f = 100 kHz RL = 2 kΩ, CL = 100 pF RL = 2 kΩ, CL = 100 pF RL = 2 kΩ CL = 100 pF, AV = 1 , 0.22 710 860 46 13 0.29 kHz Degrees dB V/μs 1. Guaranteed by design. Doc ID 15688 Rev 2 7/26 Electrical characteristics Table 6. Symbol DC performance TSV63x TSV63xA TSV633AIST - MiniSO10 Vio Offset voltages Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST Input offset voltage drift Input offset current (Vout = VCC/2) Input bias current (Vout = VCC/2) Common mode rejection ratio 20 log (ΔVic/ΔVio) Supply voltage rejection ratio 20 log (ΔVCC/ΔVio) Large signal voltage gain 2 1 Tmin < Top < Tmax 1 1 Tmin < Top < Tmax 0 V to 5 V, Vout = 2.5 V Tmin < Top < Tmax VCC = 1.8 to 5 V Tmin < Top < Tmax RL= 10 kΩ Vout = 0.5 V to 4.5 V , Tmin < Top < Tmax VRF = 100 mVrms, f = 400 MHz EMIRR EMI Rejection Ratio VRF = 100 mVrms, f = 900 MHz EMIRR = -20 log (VRFpeak/ΔVio) V = 100 mV RF rms, f =1800 MHz TSV63x Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Parameter Conditions Min. Typ. Max. Unit 3 0.8 1 4.5 2 2.2 mV mV μV/°C DVio Iio 10 (1) pA pA pA pA dB dB 100 10(1) 100 Iib 1 60 55 75 73 89 84 61 85 98 102 80 CMR SVR dB dB dB Avd dB 92 83 35 50 7 6 40 35 40 35 50 60 69 72 µA µA 74 mA 69 mA 35 50 mV mV VRF = 100 mVrms, f =2400 MHz VOH VOL High level output voltage Low level output voltage RL = 10 kΩ Tmin < Top < Tmax RL = 10 kΩ Tmin < Top < Tmax Vo = 5 V Tmin < Top < Tmax Vo = 0 V Tmin < Top < Tmax No load, Vout=VCC/2 Tmin < Top < Tmax Isink Iout Isource Supply current (per operator) ICC AC performance GBP Fu Gain bandwidth product Unity gain frequency RL= 2 kΩ CL = 100 pF, f = 100 kHz , RL = 2 kΩ CL = 100 pF, , 730 880 830 kHz kHz 8/26 Doc ID 15688 Rev 2 TSV63x Table 6. Symbol φm Gm SR en THD+en Electrical characteristics Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) (continued) Parameter Phase margin Gain margin Slew rate Equivalent input noise voltage Total harmonic distortion + noise Conditions RL = 2 kΩ, CL = 100 pF RL = 2 kΩ, CL = 100 pF RL = 2 kΩ, CL = 100 pF, Av=1 f = 1 kHz f = 10 kHz VCC = 5V, f = 1kHz, AV = 1, RL = 100kΩ Vicm = VCC/2, Vout = 2VPP , 0.25 Min. Typ. 48 13 0.34 60 33 0.002 Max. Unit Degrees dB V/μs nV ----------Hz % 1. Guaranteed by design. Table 7. Symbol Shutdown characteristics at VCC = 5 V Parameter Conditions Min. Typ. Max. Unit DC performance SHDN = VCCICC Supply current in shutdown mode (all operators) Tmin < Top < 85° C Tmin < Top < 125° C ton toff VIH VIL IIH IIL IOLeak Amplifier turn-on time Amplifier turn-off time SHDN logic high SHDN logic low SHDN current high SHDN current low SHDN = VCC+ SHDN = VCC10 10 50 1 RL = 2 kΩ , Vout = VCC- V to VCC-+0.2 V RL = 2 kΩ , Vout = VCC+ - 0.5 V to VCC+ - 0.7 V 2 0.8 200 20 5 50 200 1.5 nA nA µA ns ns V V pA pA pA nA Output leakage in shutdown SHDN = VCCmode Tmin < Top < 125° C Doc ID 15688 Rev 2 9/26 Electrical characteristics TSV63x Figure 2. Supply current vs. supply voltage at Vicm = VCC/2 Figure 3. Output current vs. output voltage at VCC = 1.5 V Figure 4. Output current vs. output voltage at Figure 5. VCC = 5 V Voltage gain and phase vs. frequency at VCC = 1.5 V Ω Figure 6. Voltage gain and phase vs. frequency at VCC = 5 V Figure 7. Phase margin vs. output current at VCC = 5 V 10/26 Doc ID 15688 Rev 2 TSV63x Electrical characteristics Figure 8. Positive slew rate vs. time Figure 9. Negative slew rate vs. time Figure 10. Positive slew rate vs. supply voltage Figure 11. Negative slew rate vs. supply voltage Figure 12. Distortion + noise vs. output voltage Vcc=1.5V Rl=2kΩ Vcc=1.5V Rl=100kΩ Figure 13. Distortion + noise vs. frequency 1 Vcc=1.5V Rl=2kΩ THD + N (%) THD + N (%) 0.1 Vcc=1.5V Rl=100kΩ f=1kHz Gain=1 BW=22kHz Vicm=Vcc/2 Vcc=5.5V Rl=2kΩ Vcc=5.5V Rl=100kΩ Output Voltage (Vpp) 0.01 Ω Ω 1E-3 10 100 1000 10000 100000 Doc ID 15688 Rev 2 11/26 Electrical characteristics TSV63x Figure 14. Noise vs. frequency Equivalent Input Voltage Noise (nV/VHz) Figure 15. EMIRR vs. frequency at Vcc = 5 V, T = 25° C 120 300 250 200 150 100 Vicm=4.5V 50 0 20 0 1 10 Vcc=5V Tamb=25 C 100 EMIRR Vpeak (dB) Vicm=2.5V 80 60 40 100 1000 10000 10 2 10 3 12/26 Doc ID 15688 Rev 2 TSV63x Application information 4 4.1 Application information Operating voltages The TSV63x can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8-, 3.3and 5-V power supplies. However, the parameters are very stable in the full VCC range and several characterization curves show the TSV63x characteristics at 1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40° C to +125° C. 4.2 Rail-to-rail input The TSV63x are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common mode range is extended from VCC-- 0.1 V to VCC+ + 0.1 V. The transition between the two pairs appears at VCC+ - 0.7 V. In the transition region, the performance of CMRR, PSRR, Vio (Figure 16 and Figure 17) and THD is slightly degraded. Figure 16. Input offset voltage vs input common mode at VCC = 1.5 V Figure 17. Input offset voltage vs input common mode at VCC = 5 V The devices are guaranteed without phase reversal. 4.3 Rail-to-rail output The operational amplifiers’ output levels can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 kΩ resistive load to VCC/2. 4.4 Shutdown function (TSV633 - TSV635) The operational amplifiers are enabled when the SHDN pin is pulled high. To disable the amplifiers, the SHDN must be pulled down to VCC-. When in shutdown mode, the amplifiers’ output is in a high impedance state. The SHDN pin must never be left floating, but tied to VCC+ or VCC-. Doc ID 15688 Rev 2 13/26 Application information TSV63x The turn-on and turn-off times are calculated for an output variation of ±200 mV (Figure 18 and Figure 19 show the test configurations). Figure 18. Test configuration for turn-on time (Vout pulled down) Figure 19. Test configuration for turn-off time (Vout pulled down) +Vcc GND 2KO +Vcc GND 2KO Vcc = 5V T = 25°C Vout Shutdown pulse Vcc-0.5V + DUT GND Vcc-0.5V + DUT GND Figure 20. Turn-on time, VCC = 5 V, Vout pulled down, T = 25° C Shutdown pulse Figure 21. Turn-off time, VCC = 5 V, Vout pulled down, T = 25° C Vout Voltage (V) Vcc = 5V T = 25 C RL connected to GND Output voltage (V) Time( s) Time( s) 14/26 Doc ID 15688 Rev 2 TSV63x Application information 4.5 Optimization of DC and AC parameters These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR and AVd, benefit from this narrow dispersion. All parts present a similar speed and the same behavior in terms of stability. In addition, the minimum values of GBP and SR are guaranteed (GBP = 730 kHz minimum and SR = 0.25 V/µs minimum). 4.6 Driving resistive and capacitive loads These products are micro-power, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 2 kΩ For lower resistive loads, the THD level may significantly . increase. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations. When driving larger capacitive loads, adding an in-series resistor at the output can improve the stability of the devices (see Figure 22 for recommended in-series resistor values). Once the in-series resistor value has been selected, the stability of the circuit should be tested on bench and simulated with the simulation model. Figure 22. In-series resistor vs. capacitive load 4.7 PCB layouts For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins. Doc ID 15688 Rev 2 15/26 Application information TSV63x 4.8 Macromodel Two accurate macromodels (with or without shutdown feature) of the TSV63x is available on STMicroelectronics’ web site at www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It also helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements. 16/26 Doc ID 15688 Rev 2 TSV63x Package information 5 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 15688 Rev 2 17/26 Package information TSV63x 5.1 SOT23-8 package information Figure 23. SOT23-8 package mechanical drawing Table 8. SOT23-8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e e1 L < 0.30 0° 0.90 0.22 0.08 2.80 2.60 1.50 Millimeters Typ. Max. 1.45 0.15 1.30 0.38 0.22 3 3 1.75 0.65 1.95 0.60 8° 0.012 0.035 0.009 0.003 0.110 0.102 0.059 Min. Inches Typ. Max. 0.057 0.006 0.051 0.015 0.009 0.118 0.118 0.069 0.026 0.077 0.024 18/26 Doc ID 15688 Rev 2 TSV63x Package information 5.2 SO-8 package information Figure 24. SO-8 package mechanical drawing Table 9. SO-8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e h L L1 k ccc 0 0.25 0.40 0.10 1.25 0.28 0.17 4.80 5.80 3.80 Millimeters Typ. Max. 1.75 0.25 0.004 0.049 0.48 0.23 4.90 6.00 3.90 1.27 0.50 1.27 1.04 8° 0.10 1° 0.010 0.016 5.00 6.20 4.00 0.011 0.007 0.189 0.228 0.150 Min. Inches Typ. Max. 0.069 0.010 0.019 0.010 0.193 0.236 0.154 0.050 0.020 0.050 0.040 8° 0.004 0.197 0.244 0.157 Doc ID 15688 Rev 2 19/26 Package information TSV63x 5.3 MiniSO-8 package information Figure 25. MiniSO-8 package mechanical drawing Table 10. MiniSO-8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e L L1 L2 k ccc 0° 0.40 0 0.75 0.22 0.08 2.80 4.65 2.80 Millimeters Typ. Max. 1.1 0.15 0.85 0.95 0.40 0.23 3.00 4.90 3.00 0.65 0.60 0.95 0.25 8° 0.10 0° 0.80 0.016 3.20 5.15 3.10 0 0.030 0.009 0.003 0.11 0.183 0.11 Min. Inches Typ. Max. 0.043 0.006 0.033 0.037 0.016 0.009 0.118 0.193 0.118 0.026 0.024 0.037 0.010 8° 0.004 0.031 0.126 0.203 0.122 20/26 Doc ID 15688 Rev 2 TSV63x Package information 5.4 MiniSO-10 package information Figure 26. MiniSO-10 package mechanical drawing Table 11. MiniSO-10 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e L L1 k aaa 0° 0.40 0.05 0.78 0.25 0.15 2.90 4.75 2.90 Millimeters Typ. Max. 1.10 0.10 0.86 0.33 0.23 3.00 4.90 3.00 0.50 0.55 0.95 3° 6° 0.10 0° 0.70 0.016 0.15 0.94 0.40 0.30 3.10 5.05 3.10 0.002 0.031 0.010 0.006 0.114 0.187 0.114 Min. Inches Typ. Max. 0.043 0.004 0.034 0.013 0.009 0.118 0.193 0.118 0.020 0.022 0.037 3° 6° 0.004 0.028 0.006 0.037 0.016 0.012 0.122 0.199 0.122 Doc ID 15688 Rev 2 21/26 Package information TSV63x 5.5 TSSOP14 package information Figure 27. TSSOP14 package mechanical drawing Table 12. TSSOP14 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e L L1 k aaa 0° 0.45 0.05 0.80 0.19 0.09 4.90 6.20 4.30 Millimeters Typ. Max. 1.20 0.15 1.00 1.05 0.30 0.20 5.00 6.40 4.40 0.65 0.60 1.00 8° 0.10 0° 0.75 0.018 5.10 6.60 4.50 0.002 0.031 0.007 0.004 0.193 0.244 0.169 Min. Inches Typ. Max. 0.047 0.004 0.039 0.006 0.041 0.012 0.0089 0.197 0.252 0.173 0.0256 0.024 0.039 8° 0.004 0.030 0.201 0.260 0.176 22/26 Doc ID 15688 Rev 2 TSV63x Package information 5.6 TSSOP16 package information Figure 28. TSSOP16 package mechanical drawing Table 13. b TSSOP16 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e k L L1 aaa 0° 0.45 0.05 0.80 0.19 0.09 4.90 6.20 4.30 Millimeters Typ. Max. 1.20 0.15 1.00 1.05 0.30 0.20 5.00 6.40 4.40 0.65 8° 0.60 1.00 0.10 0.75 0° 0.018 5.10 6.60 4.50 0.002 0.031 0.007 0.004 0.193 0.244 0.169 Min. Inches Typ. Max. 0.047 0.006 0.039 0.041 0.012 0.008 0.197 0.252 0.173 0.0256 8° 0.024 0.039 0.004 0.030 0.201 0.260 0.177 Doc ID 15688 Rev 2 23/26 Ordering information TSV63x 6 Ordering information Table 14. Order codes Temperature range Package Packing Marking TSV632 SO-8 TSV632AID/DT TSV632IST MiniSO-8 TSV632AIST TSV632ILT TSV633IST TSV633AIST TSV634IPT TSSOP-14 TSV634AIPT TSV635IPT TSSOP-16 TSV635AIPT Tape & reel TSV635A Tape & reel TSV634A TSV635 -40° C to +125° C MiniSO-10 Tape & reel K146 TSV634 SOT23-8 Tape & reel Tape & reel K145 K110 K111 Tube and tape & reel TV632A K110 Order code TSV632ID/DT 24/26 Doc ID 15688 Rev 2 TSV63x Revision history 7 Revision history Table 15. Date 25-May-2009 15-Jun-2009 Document revision history Revision 1 2 Initial release. Corrected pin connection diagram in Figure 1. Changes Doc ID 15688 Rev 2 25/26 TSV63x Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 26/26 Doc ID 15688 Rev 2