TSV91x, TSV91xA
Datasheet
Single, dual, and quad rail-to-rail input/output 8 MHz operational amplifiers
Features
TSV911
SOT23-5
SO8
TSV912
DFN8 2x2
MiniSO8
SO8
TSV914
TSSOP14
Rail-to-rail input and output
Wide bandwidth
Low power consumption: 820 µA typ.
Unity gain stability
High output current: 35 mA
Operating from 2.5 V to 5.5 V
Low input bias current, 1 pA typ.
Low input offset voltage: 1.5 mV max. (A grade)
ESD internal protection ≥ 5 kV
Latch-up immunity
Applications
SO14
Product status link
TSV911, TSV911A, TSV912, TSV912A,
TSV914, TSV914A
Related products
See TSV991,
TSV992, TSV994
and TSV991A,
TSV992A,
TSV994A
•
•
•
•
•
•
•
•
•
•
for higher speed
•
•
•
•
•
•
Battery-powered applications
Portable devices
Signal conditioning
Active filtering
Medical instrumentation
Automotive applications
Description
The TSV91x and TSV91xA operational amplifiers (op amps) offer low voltage
operation and rail-to-rail input and output, as well as an excellent speed/power
consumption ratio, providing an 8 MHz gain-bandwidth product while consuming only
1.1 mA maximum at 5 V. The op amps are unity gain stable and feature an ultra-low
input bias current.
The devices are ideal for sensor interfaces, battery-supplied and portable
applications, as well as active filtering.
DS4899 - Rev 12 - November 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
TSV91x, TSV91xA
Package pin connections
1
Package pin connections
Figure 1. Pin connections for each package (top view)
SOT23-5
OUT 1
5 VCC+
OUT 1
VCC- 2
IN+ 3
5 VCC-
VCC+ 2
4 IN-
IN+ 3
TSV911ILT
4 IN-
TSV911RILT
SO8 (single)
NC 1
8 NC
In1- 2
-
7 VCC+
In1+ 3
+
6 Out
VCC- 4
5 NC
MiniSO8, SO8, DFN8 2x2 (dual)
Out1 1
8 VCC+
In1- 2
-
In1+ 3
+
VCC- 4
7 Out2
-
6 In2-
+
5 In2+
SO14, TSSOP14
14 Out4
Out1 1
In1- 2
-
-
13 In4-
In1+ 3
+
+
12 In4+
In2+ 5
+
+
10 In3+
In2- 6
-
-
9 In3-
11 VCC-
VCC+ 4
Out2 7
1.
DS4899 - Rev 12
8 Out3
The exposed pad of the DFN8 2x2 package is not internally connected and can be set to VCC- or left
floating.
page 2/28
TSV91x, TSV91xA
Absolute maximum ratings and operating conditions
2
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
VCC
Supply voltage
Vid
Differential input voltage (2)
Vin
Input voltage (3)
(VCC-) - 0.2 to (VCC+) + 0.2
Iin
Input current (4)
10
Tstg
Tj
(1)
6
±VCC
Storage temperature
-65 to 150
Maximum junction temperature
150
SOT23-5
Rthja
Rthjc
Thermal resistance junction to ambient (5) (6)
Thermal resistance junction to case (5) (6)
57
SO8
125
MiniSO8
190
SO14
103
TSSOP14
100
SOT23-5
81
SO8
40
MiniSO8
39
SO14
31
TSSOP14
32
5
MM: machine model (8)
V
mA
°C
250
DFN8 2x2
HBM: human body model (7)
°C/W
kV
400
ESD
CDM: charged device model
Unit
(9)
SOT23-5, SO8,
MiniSO8
1500
TSSOP14
750
SO14
500
Latch-up immunity
200
V
mA
1. All voltage values, except the differential voltage, are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal
3. VCC - VIN must not exceed 6 V
4. Input current must be limited by a resistor in series with the inputs
5. Short-circuits can cause excessive heating and destructive dissipation.
6. Rth are typical values
7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin
combinations with other pins floating.
8. Machine model: 200 pF charged to the specified voltage, then discharged directly between two pins of the device with no
external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating
9. Charged device model: all pins plus packages are charged together to the specified voltage and then discharged directly to
the ground.
DS4899 - Rev 12
page 3/28
TSV91x, TSV91xA
Absolute maximum ratings and operating conditions
Table 2. Operating conditions
Symbol
DS4899 - Rev 12
Parameter
Value
-40 °C < Top < 125 °C
2.5 to 5.5
0 °C < Top < 125 °C
2.3 to 5.5
VCC
Supply voltage
Vicm
Common mode input voltage range
Top
Operating free air temperature range
Unit
V
(VCC-) - 0.1 to (VCC+) + 0.1
-40 to 125
°C
page 4/28
TSV91x, TSV91xA
Electrical characteristics
3
Electrical characteristics
Table 3. Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, T = 25 °C (unless
otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
0.1
4.5
Unit
DC performance
Offset voltage, TSV91x
Vio
Offset voltage, TSV91xA
∆Vio/∆T
Iio
Iib
CMR
Avd
Top = 25 °C
Tmin < Top < Tmax
7.5
Top = 25 °C
1.5
Tmin < Top < Tmax
3
Input offset voltage drift
Input offset current (1)
Input bias current (1)
5
Top = 25 °C
Large signal voltage gain
1
Tmin < Top < Tmax
1
Tmin < Top < Tmax
High-level output voltage
58
53
RL = 10 kΩ, Vout = 0.5 V to 2 V, Top = 25 °C
80
Tmin < Top < Tmax
75
Tmin < Top < Tmax
Iout
Isource
ICC
Supply current (per channel)
RL = 600 Ω
45
150
150
15
Tmin < Top < Tmax
40
mV
40
RL = 600 Ω
45
150
150
Vo = 2.5 V, Top = 25 °C
18
Tmin < Top < Tmax
16
Vo = 0 V, Top = 25 °C
18
Tmin < Top < Tmax
16
No load, Vout = VCC/2
40
40
Tmin < Top < Tmax
Isink
pA
dB
89
15
RL = 10 kΩ
Low-level output voltage
10
75
Tmin < Top < Tmax
VOL
10
100
RL = 10 kΩ
VCC - VOH
μV/°C
100
Top = 25 °C
Common mode rejection ratio,20 log 0 V to 2.5 V, Vout = 1.25 V, Top = 25 °C
(ΔVic/ΔVio)
Tmin < Top < Tmax
mV
32
35
0.78
Tmin < Top < Tmax
mA
1.1
1.1
AC performance
GBP
Gain bandwidth product
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
Top = 25 °C
8
Fu
Unity gain frequency
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
7.2
ϕm
Phase margin
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
45
DS4899 - Rev 12
MHz
Degrees
page 5/28
TSV91x, TSV91xA
Electrical characteristics
Symbol
Parameter
Conditions
Gm
Gain margin
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
SR
Slew rate
en
THD+en
Min.
Typ.
Max.
Unit
8
dB
RL = 2 kΩ, CL = 100 pF, Av = 1, Top = 25 °C
4.5
V/μs
Equivalent input noise voltage
f = 10 kHz, Top = 25 °C
21
nV/√Hz
Total harmonic distortion
G = 1, f = 1 kHz, RL = 2 kΩ, BW = 22 kHz,
Top = 25 °C, Vicm = (VCC + 1)/2,
0.001
%
Vout = 1.1 Vpp
1. Guaranteed by design
DS4899 - Rev 12
page 6/28
TSV91x, TSV91xA
Electrical characteristics
Table 4. Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, T = 25 °C (unless
otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
0.1
4.5
Unit
DC performance
Offset voltage, TSV91x
Vio
Offset voltage, TSV91xA
∆Vio/∆T
Iio
Iib
Top = 25 °C
Tmin < Top < Tmax
7.5
Top = 25 °C
1.5
Tmin < Top < Tmax
Input bias current (1)
5
Top = 25 °C
Common mode rejection ratio,
20 log (ΔVic/ΔVio)
RL = 10 kΩ, Vout = 0.5 V to 2.8 V,
Large signal voltage gain
1
Tmin < Top < Tmax
Top = 25 °C
Top = 25 °C
Tmin < Top < Tmax
High-level output voltage
60
55
80
dB
89
15
Tmin < Top < Tmax
Iout
Isource
ICC
Supply current (per channel)
RL = 600 Ω
45
150
150
15
Tmin < Top < Tmax
40
mV
40
RL = 600 Ω
45
150
150
Vo = 3.3 V, Top = 25 °C
18
Tmin < Top < Tmax
16
Vo = 0 V, Top = 25 °C
18
Tmin < Top < Tmax
16
No load, Vout = VCC/2
40
40
Tmin < Top < Tmax
Isink
pA
75
RL = 10 kΩ
Low-level output voltage
10
78
Tmin < Top < Tmax
VOL
10
100
RL = 10 kΩ
VCC - VOH
μV/°C
100
Top = 25 °C
Tmin < Top < Tmax
Avd
1
Tmin < Top < Tmax
0 V to 3.3 V, Vout = 1.65 V,
CMR
3
Input offset voltage drift
Input offset current (1)
mV
32
35
0.8
Tmin < Top < Tmax
mA
1.1
1.1
AC performance
GBP
Gain bandwidth product
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
Top = 25 °C
8
MHz
Fu
Unity gain frequency
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
7.2
ϕm
Phase margin
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
45
Degrees
Gm
Gain margin
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
8
dB
DS4899 - Rev 12
page 7/28
TSV91x, TSV91xA
Electrical characteristics
Symbol
Parameter
SR
Slew rate
en
Equivalent input noise voltage
Conditions
RL = 2 kΩ, CL = 100 pF, Av = 1,
Top = 25 °C
f = 10 kHz, Top = 25 °C
Min.
Typ.
Max.
Unit
4.5
V/μs
21
nV/√Hz
0.0007
%
G = 1, f = 1 kHz, RL = 2 kΩ, BW = 22 kHz,
THD+en
Total harmonic distortion
Top = 25 °C, Vicm = (VCC + 1)/2,
Vout = 1.9 Vpp
1. Guaranteed by design
DS4899 - Rev 12
page 8/28
TSV91x, TSV91xA
Electrical characteristics
Table 5. Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, T = 25 °C (unless
otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
0.1
4.5
Unit
DC performance
Offset voltage, TSV91x
Vio
Offset voltage, TSV91xA
∆Vio/∆T
Iio
Iib
Top = 25 °C
Tmin < Top < Tmax
7.5
Top = 25 °C
1.5
Tmin < Top < Tmax
Input bias current (1)
CMR
Common mode rejection ratio,
20 log (ΔVic/ΔVio)
SVR
Supply voltage rejection ratio,
20 log (ΔVCC/ΔVio)
5
Top = 25 °C
Large signal voltage gain
1
Tmin < Top < Tmax
1
Tmin < Top < Tmax
62
Tmin < Top < Tmax
58
VCC = 2.5 to 5 V
70
86
80
91
Tmin < Top < Tmax
High-level output voltage
15
Tmin < Top < Tmax
RL = 600 Ω
45
Iout
Isource
ICC
Supply current (per channel)
15
Tmin < Top < Tmax
150
40
mV
40
RL = 600 Ω
45
150
150
Vo = 5 V, Top = 25 °C
18
Tmin < Top < Tmax
16
Vo = 0 V, Top = 25 °C
18
Tmin < Top < Tmax
16
No load, Vout = 2.5 V
40
150
Tmin < Top < Tmax
Isink
dB
40
RL = 10 kΩ
Low-level output voltage
pA
82
Tmin < Top < Tmax
VOL
10
75
RL = 10 kΩ
VCC - VOH
10
100
0 V to 5 V, Vout = 2.5 V, Top = 25 °C
Top = 25 °C
μV/°C
100
Top = 25 °C
RL = 10 kΩ, Vout = 0.5 V to 4.5 V,
Avd
3
Input offset voltage drift
Input offset current (1)
mV
32
35
0.78
Tmin < Top < Tmax
mA
1.1
1.1
AC performance
Gain bandwidth product
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
Top = 25 °C
8
Fu
Unity gain frequency
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
7.5
ϕm
Phase margin
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
45
Degrees
Gm
Gain margin
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
8
dB
GBP
DS4899 - Rev 12
MHz
page 9/28
TSV91x, TSV91xA
Electrical characteristics
Symbol
Parameter
SR
Slew rate
en
Equivalent input noise voltage
THD+en
Total harmonic distortion
Conditions
RL = 2 kΩ, CL = 100 pF, Av = 1,
Top = 25 °C
Min.
Typ.
4.5
f = 1 kHz, Top = 25 °C
27
f = 10 kHz, Top = 25 °C
21
G = 1, f = 1 kHz, RL = 2 kΩ, BW = 22
kHz, Top = 25 °C, Vicm = (VCC + 1)/2,
Vout = 3.6 Vpp
0.0004
Max.
Unit
V/μs
nV/√Hz
%
1. Guaranteed by design
DS4899 - Rev 12
page 10/28
TSV91x, TSV91xA
Electrical characteristic curves
4
Electrical characteristic curves
Figure 2. Input offset voltage distribution at T = 25 °C
40
140
Vcc= 5V
Vicm =2.5V
Ta mb =25 °C
120
°
30
100
Quantity of parts
Quantity of parts
Figure 3. Input offset voltage distribution at T = 125 °C
80
60
40
20
10
20
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
Input o ffs et Vo ltag e (mV)
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
Input o ffs et Vo ltag e (mV)
Figure 4. Supply current vs. input common-mode voltage
at VCC = 2.5 V
Figure 5. Supply current vs. input common-mode voltage
at VCC = 5 V
Figure 6. Output current vs. output voltage at VCC = 2.5 V
Figure 7. Output current vs. output voltage at VCC = 5 V
DS4899 - Rev 12
page 11/28
TSV91x, TSV91xA
Electrical characteristic curves
Figure 8. Voltage gain and phase vs. frequency at VCC =
2.5 V and Vicm = 0.5 V
40
40
160
20
80
40
0
0
−40
−10
−80
Vcc=2.5V, Vicm=0.5V
CI=100pF, RI=2kohms, Vrl=Vcc/2
Tamb=25ºC
−120
−160
−40
6
7
10
Phase
Gain (dB)
10
Phase (°)
Gain (dB)
20
−30
30
120
10
P has e (°)
30
−20
Figure 9. Voltage gain and phase vs. frequency at VCC =
5.5 V and Vicm = 0.5 V
0
-10
-20
-30
-40
10
10
Figure 10. Phase margin vs. capacitive load
6
10
7
Figure 11. Phase margin vs. output current
80
70
Phase margin (°)
Phase margin (°)
60
Vcc=5V, RI=2kOhms
Vrl=2.5V
Ta m b = 25°C
50
40
30
20
10
0
Figure 12. Positive slew rate
5
-5
Negative slew rat e (V/µs )
-6
4
3
Vin : from 0.5V to Vcc- 0.5V
S R : ca lculat ed from 10% to 90%
DS4899 - Rev 12
3.0
3.5
4.0
4.5
Supply Voltage (V)
5.0
−10
0
10
20
-4
-3
-2
-1
1
0
2.5
−20
Figure 13. Negative slew rate
6
2
Vcc= 5V, C l = 1 0 0 p F
Ta m b = 25°C
5.5
0
2.5
Vin : from 0.5V to Vcc-0.5V
S R : calculated from 10% to 90%
3.0
3.5
4.0
4.5
5.0
5.5
Supply voltage
page 12/28
TSV91x, TSV91xA
Electrical characteristic curves
Figure 14. Distortion + noise vs. frequency
Figure 15. Distortion + noise vs. output voltage
0.01
THD + N (%)
Vcc= 2.7V
1E -3
1E -4
10
100
1000
10000
Figure 17. Phase margin vs. capacitive load and serial
resistor
Phase margin
(°)
Figure 16. Noise vs. frequency
100000
Vcc=5V
Vrl=2.5V
Tamb= 25°
Figure 18. Supply current vs. supply voltage
DS4899 - Rev 12
page 13/28
TSV91x, TSV91xA
Application information
5
Application information
5.1
Driving resistive and capacitive loads
These products are low-voltage, low-power operational amplifiers optimized to drive rather large resistive loads
above 2 kΩ.
In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no
oscillations. When driving larger capacitive loads, adding a small in-series resistor at the output can improve the
stability of the device (figure below shows the recommended in-series resistor values). Once the in-series resistor
value has been selected, the stability of the circuit should be tested on bench and simulated with the simulation
model.
Figure 19. In-series resistor vs. capacitive load
5.2
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply
pins.
5.3
Macromodel
An accurate macromodel of the TSV91x is available on STMicroelectronics’ web site at: www.st.com . This
model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV91x operational
amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions
mentioned in the datasheet. It helps to validate a design approach and to select the right operational amplifier, but
it does not replace on-board measurements.
DS4899 - Rev 12
page 14/28
TSV91x, TSV91xA
Package information
6
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.
6.1
SOT23-5 package information
Figure 20. SOT23-5 package outline
Table 6. SOT23-5 mechanical data
Dimensions
Ref.
A
Millimeters
Min.
Typ.
Max.
Min.
Typ.
Max.
0.90
1.20
1.45
0.035
0.047
0.057
A1
DS4899 - Rev 12
Inches
0.15
0.006
A2
0.90
1.05
1.30
0.035
0.041
0.051
B
0.35
0.40
0.50
0.014
0.016
0.020
C
0.09
0.15
0.20
0.004
0.006
0.008
D
2.80
2.90
3.00
0.110
0.114
0.118
D1
1.90
0.075
e
0.95
0.037
E
2.60
2.80
3.00
0.102
0.110
0.118
F
1.50
1.60
1.75
0.059
0.063
0.069
L
0.10
0.35
0.60
0.004
0.014
0.024
K
0 degrees
10 degrees
0 degrees
10 degrees
page 15/28
TSV91x, TSV91xA
DFN8 2 x 2 package information
6.2
DFN8 2 x 2 package information
Figure 21. DFN8 2 x 2 package outline
Table 7. DFN8 2 x 2 mechanical data
Dimensions
Ref.
A
Millimeters
Min.
Typ.
Max.
Min.
Typ.
Max.
0.51
0.55
0.60
0.020
0.022
0.024
A1
0.05
A3
0.002
0.15
0.006
b
0.18
0.25
0.30
0.007
0.010
0.012
D
1.85
2.00
2.15
0.073
0.079
0.085
D2
1.45
1.60
1.70
0.057
0.063
0.067
E
1.85
2.00
2.15
0.073
0.079
0.085
E2
0.75
0.90
1.00
0.030
0.035
0.039
e
DS4899 - Rev 12
Inches
0.50
0.020
L
0.425
0.017
ddd
0.08
0.003
page 16/28
TSV91x, TSV91xA
DFN8 2 x 2 package information
Figure 22. DFN8 2 x 2 recommended footprint
Note:
DS4899 - Rev 12
The exposed pad of the DFN8 2x2 package is not internally connected. It can be set to VCC- or left floating.
page 17/28
TSV91x, TSV91xA
MiniSO8 package information
6.3
MiniSO8 package information
Figure 23. MiniSO8 package outline
Table 8. MiniSO8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
0
Min.
Typ.
A2
0.75
b
c
D
2.80
E
E1
0.043
0
0.95
0.030
0.22
0.40
0.009
0.016
0.08
0.23
0.003
0.009
3.00
3.20
0.11
0.118
0.126
4.65
4.90
5.15
0.183
0.193
0.203
2.80
3.00
3.10
0.11
0.118
0.122
0.85
0.65
0.40
0.60
0.0006
0.033
0.80
0.016
0.024
0.95
0.037
L2
0.25
0.010
ccc
0°
0.037
0.026
L1
k
Max.
0.15
e
DS4899 - Rev 12
Max.
1.1
A1
L
Inches
8°
0.10
0°
0.031
8°
0.004
page 18/28
TSV91x, TSV91xA
SO8 package information
6.4
SO8 package information
Figure 24. SO8 package outline
Table 9. SO8 package mechanical data
Dimensions
Millimeters
Ref.
Min.
Typ.
A
Max.
Min.
Typ.
1.75
0.25
Max.
0.069
A1
0.10
A2
1.25
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.010
D
4.80
4.90
5.00
0.189
0.193
0.197
E
5.80
6.00
6.20
0.228
0.236
0.244
E1
3.80
3.90
4.00
0.150
0.154
0.157
e
0.004
0.010
0.049
1.27
0.050
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
L1
k
ccc
DS4899 - Rev 12
Inches
1.04
0°
0.040
8°
0.10
0°
8°
0.004
page 19/28
TSV91x, TSV91xA
TSSOP14 package information
6.5
TSSOP14 package information
Figure 25. TSSOP14 package outline
aaa
Table 10. TSSOP14 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.20
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.90
5.00
5.10
0.193
0.197
0.201
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.176
e
L
k
aaa
1.00
0.65
0.45
L1
DS4899 - Rev 12
Inches
0.60
0.0256
0.75
0.018
1.00
0°
0.024
0.030
0.039
8°
0.10
0°
8°
0.004
page 20/28
TSV91x, TSV91xA
SO14 package information
6.6
SO14 package information
Figure 26. SO14 package outline
Table 11. SO14 package mechanical data
Dimensions
Millimeters
Ref.
Min.
Typ.
Inches
Max.
Min.
Typ.
1.75
0.069
A
1.35
1.75
0.05
0.068
A1
0.10
0.25
0.004
0.009
A2
1.10
1.65
0.04
0.06
B
0.33
0.51
0.01
0.02
C
0.19
0.25
0.007
0.009
D
8.55
8.75
0.33
0.34
E
3.80
4.0
0.15
0.15
e
1.27
0.05
H
5.80
6.20
0.22
0.24
h
0.25
0.50
0.009
0.02
L
0.40
1.27
0.015
0.05
k
ddd
DS4899 - Rev 12
Max.
8° (max.)
0.10
0.004
page 21/28
TSV91x, TSV91xA
Ordering information
7
Ordering information
Table 12. Order codes
Order code
Temperature range
TSV911IDT
Package
Packing
V911I
SΟ8
TSV911AIDT
V911AI
TSV911ILT
K127
SOT23-5
TSV911AILT
K128
TSV911RILT
K125
TSV912IST
TSV912IDT
TSV912IQ2T
TSV914IPT
V912AI
K1Q
V914I
TSSOP14
TSV914IDT
-40 °C to 125 °C
TSV914AIDT
TSV911IYLT (1)
TSV911AIYLT (1)
SO14
SOT23-5, automotive grade
(1)
SO-8, automotive grade
TSV912AIYDT (1)
TSV912IYST (1)
TSV912AIYST (1)
TSV914IYPT (1)
TSV914AIYPT (1)
V914I
Tape and reel
V914AI
K147
K148
V911AIY
V912IY
V912AIY
MiniSO8, automotive grade
(1)
(1)
V914AI
V911IY
(1)
TSV912IYDT (1)
TSV914AIYDT
V912I
DFN8 2x2
TSV914AIPT
TSV914IYDT
K126
SO8
TSV912AIDT
TSV911AIYDT
K125
MiniSO8
TSV912AIST
TSV911IYDT
Marking
SO14, automotive grade
TSSOP14, automotive grade
K147
K148
V914IY
V914AIY
V914IY
V914AIY
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 & Q 002 or equivalent.
DS4899 - Rev 12
page 22/28
TSV91x, TSV91xA
Revision history
Table 13. Document revision history
Date
Revision
28-Aug-2006
1
Changes
First release.
Modified ESD CDM parameter for SO-14
package in Table 2: Absolute maximum ratings.
Noise parameters updated in Section 2:
Electrical characteristics.
07-Jun-2007
2
Added limits in temperature in Section 2:
Electrical characteristics.
Added automotive grade level description in
Table 13: Order codes.
Added footnote about SO-14 package in
Table 13: Order codes.
Added Figure 16: Phase margin vs. capacitive
load and serial resistor.
Updated footnotes for ESD parameters in
Table 2: Absolute maximum ratings.
11-Feb-2008
3
Corrected MiniSO-8 package information in
Table 9: MiniSO-8 package mechanical data.
Added missing markings for order codes
TSV911AILT and TSV912AILT in Table 13:
Order codes.
Added input current information in Table 2:
Absolute maximum ratings.
Changed Figure 7 and Figure 8.
Added Chapter 3: Application information.
22-Jun-2009
4
Updated package information in Chapter 4.
Added automotive order codes: TSV911IYLT,
TSV911AIYLT, TSV912IYST, TSV912AIYST,
TSV914IYPT and TSV914AIYPT in Table 13:
Order codes.
Added A versions of devices in title on cover
page.
17-Sep-2009
5
Modified ESD value for machine model in
Table 2: Absolute maximum ratings.
Added Figure 17: Supply current vs. supply
voltage on page 10.
18-Mar-2010
6
Added TSV911RILT in Table 13: Order codes,
housed in a SOT23-5 package with a new
pinout.
Added pin connections for TSV911ILT and
TSV91RILT on cover page.
Added Table 1: Device summary on cover page.
Modified supply voltage value in Table 3.
24-Jun-2010
7
Corrected typical value of DVio in Table 4,
Table 5 and Table 6.
Added TSV911RILT, TSV911IYDT and
TSV911AIYDT order codes in Table 13.
Modified Note 2 under Table 13.
DS4899 - Rev 12
page 23/28
TSV91x, TSV91xA
Date
Revision
Changes
06-Mar-2012
8
Added DFN8 2x2 package and ordering
information for TSV912 device to Chapter 4 and
Chapter 5.
Updated layout
Section 2: replaced DVio/DT by ∆Vio/∆T.
27-Nov-2015
9
Section 5.2: updated name of package and title
of drawings and table; added note about
exposed pad.
Table 13: "Order codes": removed obsolete
order codes (TSV911ID, TSV911AID,
TSV912ID, TSV912AID, TSV914ID,
TSV914AID).
Added silhouettes of packages to cover page
Placed pinout diagrams in Section 2: "Package
pin connections"
Added Related products
29-Aug-2016
10
Description: added footnote 1
Section 7.2: "DFN8 2 x 2 package information":
modified note about the exposed pad.
Section 8: "Ordering information": removed note
regarding "moisture
sensitivity level 1"
DS4899 - Rev 12
10-Oct-2019
11
Updated Table 12. Order codes.
20-Nov-2019
12
Updated cover page.
page 24/28
TSV91x, TSV91xA
Contents
Contents
1
Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
Absolute maximum ratings and operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
Electrical characteristic curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
5
Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
6
7
5.1
Driving resistive and capacitive loads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.2
PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.3
Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
6.1
SOT23-5 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.2
DFN8 2 x 2 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.3
MiniSO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6.4
SO8 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6.5
TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.6
SO14 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
DS4899 - Rev 12
page 25/28
TSV91x, TSV91xA
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Absolute maximum ratings (AMR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, T = 25 °C (unless
otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, T = 25 °C (unless
otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, T = 25 °C (unless
otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SOT23-5 mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DFN8 2 x 2 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MiniSO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TSSOP14 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SO14 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DS4899 - Rev 12
page 26/28
TSV91x, TSV91xA
List of figures
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
DS4899 - Rev 12
Pin connections for each package (top view) . . . . . . . . . . . . . . . . . .
Input offset voltage distribution at T = 25 °C . . . . . . . . . . . . . . . . . . .
Input offset voltage distribution at T = 125 °C . . . . . . . . . . . . . . . . . .
Supply current vs. input common-mode voltage at VCC = 2.5 V . . . . . .
Supply current vs. input common-mode voltage at VCC = 5 V . . . . . . .
Output current vs. output voltage at VCC = 2.5 V . . . . . . . . . . . . . . . .
Output current vs. output voltage at VCC = 5 V . . . . . . . . . . . . . . . . .
Voltage gain and phase vs. frequency at VCC = 2.5 V and Vicm = 0.5 V
Voltage gain and phase vs. frequency at VCC = 5.5 V and Vicm = 0.5 V
Phase margin vs. capacitive load . . . . . . . . . . . . . . . . . . . . . . . . . .
Phase margin vs. output current . . . . . . . . . . . . . . . . . . . . . . . . . . .
Positive slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Negative slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Distortion + noise vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . .
Distortion + noise vs. output voltage . . . . . . . . . . . . . . . . . . . . . . . .
Noise vs. frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phase margin vs. capacitive load and serial resistor . . . . . . . . . . . . .
Supply current vs. supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . .
In-series resistor vs. capacitive load . . . . . . . . . . . . . . . . . . . . . . . .
SOT23-5 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN8 2 x 2 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN8 2 x 2 recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . .
MiniSO8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SO8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TSSOP14 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SO14 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 2
11
11
11
11
11
11
12
12
12
12
12
12
13
13
13
13
13
14
15
16
17
18
19
20
21
page 27/28
TSV91x, TSV91xA
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2019 STMicroelectronics – All rights reserved
DS4899 - Rev 12
page 28/28
工商网监
湘ICP备2023018690号
