TSV991, TSV992, TSV994
TSV991A, TSV992A, TSV994A
Datasheet
Rail-to-rail input/output 20 MHz GBP operational amplifiers
Features
Pin connection
(top view)
SOT23-5
SO8 (single)
NC 1
8 NC
In1- 2
-
7 VCC+
In1+ 3
+
6 Out
VCC- 4
DFN6 1.3x1.6x0.55
IN-
1
6
VCC+
IN+
2
5
VCC-
NC
3
4
OUT
5 NC
MiniSO8, SO8, DFN8 2x2
SO14, TSSOP14
DFN8 2x2
•
•
•
•
•
•
•
•
•
Low input offset voltage: 1.5 mV max. (A grade)
Rail-to-rail input and output
Wide bandwidth 20 MHz
Stable for gain ≥ 4 or ≤ -3
Low power consumption: 820 µA typ.
High output current: 35 mA
Operating from 2.5 V to 5.5 V
Low input bias current, 1 pA typ.
ESD internal protection ≥ 5 kV
Applications
•
•
•
•
•
Battery-powered applications
Portable devices
Signal conditioning and active filtering
Medical instrumentation
Automotive applications
Description
Maturity status link
TSV991, TSV992, TSV994, TSV991A,
TSV992A, TSV994A
Related products
See TSV911, TSV912,
TSV914, TSV911A,
TSV912A, TSV914A
For unity-gain
stable
amplifiers
The TSV99x and TSV99xA family of single, dual, and quad operational amplifiers
offers low voltage operation and rail-to-rail input and output. These devices feature
an excellent speed/power consumption ratio, offering a 20 MHz gain-bandwidth,
stable for gains above 4 (100 pF capacitive load), while consuming only 1.1 mA
maximum at 5 V. They also feature an ultra-low input bias current. These
characteristics make the TSV99x family ideal for sensor interfaces, battery-supplied
and portable applications, as well as active filtering. These characteristics make the
TSV99x, TSV99xA family ideal for sensor interfaces, battery-supplied and portable
applications, as well as active filtering.
DS4975 - Rev 15 - September 2022
For further information contact your local STMicroelectronics sales office.
www.st.com
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
VCC
Supply voltage (1)
Vid
Differential input voltage (2)
Vin
Input voltage
Iin
Input current (4)
Tstg
Tj
Rthja
Rthjc
Value
6
±VCC
10
Storage temperature
-65 to 150
Maximum junction temperature
150
DFN8 2x2
57
DFN6
1.3x1.6x0.55
230
SOT23-5
250
SO8
125
MiniSO8
190
SO14
103
TSSOP14
100
SOT23-5
81
SO8
40
MiniSO8
39
SO14
31
TSSOP14
32
Thermal resistance junction to ambient (5) (6)
HBM: human body model (7)
5
MM: machine model (8)
ESD
CDM: charged device model (9)
V
(VCC-) - 0.2 to (VCC+) +
0.2
(3)
Thermal resistance junction to case
Unit
mA
°C
°C/W
kV
400
SOT23-5,
SO8,
MiniSO8,
DFN8 2x2
1500
DFN6
1.3x1.6x0.55
TBD
TSSOP14
750
SO14
500
Latch-up immunity
V
200
mA
1. Value is with respect to the VCC- pin.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. VCC - VIN must not exceed 6 V.
4. Input current must be limited by a resistor in series with the inputs.
5. Short-circuits can cause excessive heating and destructive dissipation.
6. Rth are typical values.
7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin
combinations with other pins floating.
8. Machine model: 200 pF charged to the specified voltage, then discharged directly between two pins of the device with no
external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.
9. Charged device model: all pins plus packages are charged together to the specified voltage and then discharged directly to
the ground.
DS4975 - Rev 15
page 2/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Absolute maximum ratings and operating conditions
Table 2. Operating conditions
DS4975 - Rev 15
Symbol
Parameter
Value
VCC
Supply voltage
2.5 to 5.5
Vicm
Common mode input voltage range
(VCC-) - 0.1 to (VCC+) + 0.1
Top
Operating free air temperature range
-40 to 125
Unit
V
°C
page 3/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics
2
Electrical characteristics
Note:
In the electrical characteristic tables below, all parameter limits at temperatures other than 25 °C are guaranteed
by correlation.
Table 3. Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
0.1
4.5
Unit
DC performance
Offset voltage, TSV99x
Vio
Offset voltage, TSV99xA
∆Vio/∆T
Iio
Iib
CMR
Top = 25 °C
Tmin < Top < Tmax
7.5
Top = 25 °C
1.5
Tmin < Top < Tmax
2
Input offset current, Vout = VCC/2 Top = 25 °C
1
Tmin < Top < Tmax
Input bias current, Vout = VCC/2
(1)
Large signal voltage gain
58
Tmin < Top < Tmax
53
Top = 25 °C
VOL
High-level output voltage
Low-level output voltage
Isink
Iout
Isource
ICC
Supply current (per channel)
10
10
80
75
dB
89
75
RL = 10 kΩ, Tmin < Top < Tmax
15
40
RL = 600 Ω, Tmin < Top < Tmax
45
150
RL = 10 kΩ, Tmin < Top < Tmax
15
40
RL = 600 Ω, Tmin < Top < Tmax
45
150
Vo = 2.5 V, Top = 25 °C
18
Tmin < Top < Tmax
16
Vo = 0 V, Top = 25 °C
18
Tmin < Top < Tmax
16
No load, Vout = VCC/2, Tmin < Top < Tmax
pA
100
0 V to 2.5 V, Vout = 1.25 V, Top = 25 °C
Tmin < Top < Tmax
VCC - VOH
1
Tmin < Top < Tmax
Common mode rejection ratio,
20 log (ΔVic/ΔVio)
μV/°C
100
Top = 25 °C
RL = 10 kΩ, Vout = 0.5 V to 2 V,
Avd
3
Input offset voltage drift
(1)
mV
mV
32
mA
35
0.78
1.1
AC performance
GBP
Gain bandwidth product
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
Top = 25 °C
20
MHz
Gain
Minimum gain for stability
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top = 25 °C,
positive gain configuration
4
V/V
Gain
Minimum gain for stability
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top = 25 °C,
negative gain configuration
-3
V/V
SR
Slew rate
RL = 2 kΩ, CL = 100 pF, Top = 25 °C
10
V/μs
DS4975 - Rev 15
page 4/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
en
Equivalent input noise voltage
f = 10 kHz, Top = 25 °C
21
nV/√Hz
THD+N
Total harmonic distortion
G = -3, f = 1 kHz, RL = 2 kΩ, Bw =
22 kHz, Vicm = VCC/2, Vout = 2 Vpp,
Top=25 °C
0.0025
%
1. Guaranteed by design.
DS4975 - Rev 15
page 5/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics
Table 4. Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
0.1
4.5
Unit
DC performance
Offset voltage, TSV99x
Vio
Offset voltage, TSV99xA
∆Vio/∆T
Iio
Iib
CMR
Top = 25 °C
Tmin < Top < Tmax
7.5
Top = 25 °C
1.5
Tmin < Top < Tmax
2
Input offset current, Vout = VCC/2 Top = 25 °C
1
Input bias current, Vout = VCC/2
(1)
Common mode rejection ratio,
20 log (ΔVic/ΔVio)
Tmin < Top < Tmax
Large signal voltage gain
VOL
High-level output voltage
Low-level output voltage
Isink
Iout
Isource
ICC
Supply current (per channel)
10
10
60
Tmin < Top < Tmax
55
80
78
dB
89
75
RL = 10 kΩ, Tmin < Top < Tmax
15
40
RL = 600 Ω, Tmin < Top < Tmax
45
150
RL = 10 kΩ, Tmin < Top < Tmax
15
40
RL = 600 Ω, Tmin < Top < Tmax
45
150
Vo = 3.3 V, Top = 25 °C
18
Tmin < Top < Tmax
16
Vo = 0 V, Top = 25 °C
18
Tmin < Top < Tmax
16
No load, Vout = VCC/2, Tmin < Top < Tmax
pA
100
0 V to 3.3 V, Vout = 1.65 V, Top = 25 °C
Tmin < Top < Tmax
VCC - VOH
1
Tmin < Top < Tmax
Top = 25 °C
μV/°C
100
Top = 25 °C
RL = 10 kΩ, Vout = 0.5 V to 2.8 V,
Avd
3
Input offset voltage drift
(1)
mV
mV
32
mA
35
0.8
1.1
AC performance
GBP
Gain
Gain bandwidth product
Minimum gain for stability
RL = 2 kΩ, CL = 100 pF, f = 100 kHz, Top
= 25 °C
20
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top = 25 °C,
positive gain configuration
4
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top = 25 °C,
negative gain configuration
-3
MHz
V/V
SR
Slew rate
RL = 2 kΩ, CL = 100 pF, f = 100 kHz, Top
= 25 °C
10
V/μs
en
Equivalent input noise voltage
f = 10 kHz, Top = 25 °C
21
nV/√Hz
Total harmonic distortion
G = -3, f = 1 kHz, RL = 2 kΩ, Bw = 22
kHz, Vicm = VCC/2, Vout = 2.8 Vpp,
0.0018
%
THD+N
Top = 25 °C
1. Guaranteed by design.
DS4975 - Rev 15
page 6/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics
Table 5. Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
0.1
4.5
Unit
DC performance
Offset voltage, TSV99x
Vio
Offset voltage, TSV99xA
∆Vio/∆T
Iio
Iib
Top = 25 °C
Tmin < Top < Tmax
7.5
Top = 25 °C
1.5
Tmin < Top < Tmax
2
Input offset current, Vout = VCC/2 Top = 25 °C
1
Input bias current, Vout = VCC/2
(1)
Tmin < Top < Tmax
Common mode rejection ratio,
20 log (ΔVic/ΔVio)
Tmin < Top < Tmax
SVR
Supply voltage rejection ratio, 20
VCC = 2.5 V to 5 V
log (ΔVcc/ΔVio)
RL = 10 kΩ, Vout = 0.5 V to 4.5 V,
Avd
Large signal voltage gain
Top = 25 °C
Tmin < Top < Tmax
VCC - VOH
VOL
High-level output voltage
Low-level output voltage
Isink
Iout
Isource
ICC
Supply current (per channel)
1
Tmin < Top < Tmax
Top = 25 °C
μV/°C
10
100
Top = 25 °C
0 V to 5 V, Vout = 2.5 V,
CMR
3
Input offset voltage drift
(1)
10
pA
100
62
82
57
70
86
80
91
dB
75
RL = 10 kΩ, Tmin < Top < Tmax
15
40
RL = 600 Ω, Tmin < Top < Tmax
45
150
RL = 10 kΩ, Tmin < Top < Tmax
15
40
RL = 600 Ω, Tmin < Top < Tmax
45
150
Vo = 5 V, Top = 25 °C
18
Tmin < Top < Tmax
16
Vo = 0 V, Top = 25 °C
18
Tmin < Top < Tmax
16
No load, Vout = 2.5 V, Tmin < Top < Tmax
mV
mV
32
35
0.82
mA
1.1
AC performance
GBP
Gain
Gain bandwidth product
Minimum gain for stability
SR
Slew rate
en
Equivalent input noise voltage
DS4975 - Rev 15
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
Top = 25 °C
20
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top = 25 °C,
positive gain configuration
4
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top=25 °C,
negative gain configuration
-3
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
Top = 25 °C
f = 10 kHz, Top = 25 °C
MHz
V/V
10
V/μs
21
nV/√Hz
page 7/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics
Symbol
THD+N
Parameter
Total harmonic distortion
Conditions
G = -3, f = 1 kHz, RL = 2 kΩ, Bw = 22
kHz, Vicm = VCC/2, Vout = 4.4 Vpp,
Min.
Typ.
0.0014
Max.
Unit
%
Top = 25 °C
1. Guaranteed by design.
DS4975 - Rev 15
page 8/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristic curves
3
Electrical characteristic curves
Figure 1. Input offset voltage distribution at T = 25 °C
40
140
Vcc= 5V
Vicm =2.5V
Ta mb =25 °C
120
°
30
100
Quantity of parts
Quantity of parts
Figure 2. Input offset voltage distribution at T = 125 °C
80
60
40
20
10
20
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
Input o ffs et Vo ltag e (mV)
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
Input o ffs et Vo ltag e (mV)
Figure 3. Supply current vs. input common-mode voltage
at VCC = 2.5 V
Figure 4. Supply current vs. input common-mode voltage
at VCC = 5 V
Figure 5. Output current vs. output voltage at VCC = 2.5 V
Figure 6. Output current vs. output voltage at VCC = 5 V
DS4975 - Rev 15
page 9/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristic curves
Figure 8. Voltage gain and phase vs. frequency at VCC = 5
V and Vicm = 2.5 V
Figure 9. Positive slew rate
Vin : from 0.5V to Vcc- 0.5V
S R : ca lculat ed from 10% to 90%
Figure 11. Distortion + noise vs. frequency
DS4975 - Rev 15
Phase (°)
Phase (°)
Figure 7. Voltage gain and phase vs. frequency at VCC = 5
V and Vicm = 0.5 V
Figure 10. Negative slew rate
Vin : from 0.5V to Vcc- 0.5V
S R : ca lculat ed from 10 % to 90 %
Figure 12. Distortion + noise vs. output voltage
page 10/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristic curves
Figure 13. Noise vs. frequency
DS4975 - Rev 15
Figure 14. Supply current vs. supply voltage
page 11/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Application information
4
Application information
4.1
Driving resistive and capacitive loads
These products are low-voltage, low-power operational amplifiers optimized to drive rather large resistive loads
above 2 kΩ.
The TSV99x products are not unity gain stable. To ensure proper stability they must be used in a gain
configuration, with a minimum gain of -3 or 4.
However, they can be used in a “follower“ configuration by adding a small, in-series resistor at the output, which
drastically improves the stability of the device (Figure 15 shows the recommended in-series resistor values).
Once the in-series resistor value has been selected, the stability of the circuit should be tested on the bench and
simulated with the simulation model.
Another way to improve stability and reduce peaking is to add a capacitor in parallel with the feedback resistor. As
shown in Figure 16, the feedback capacitor drastically reduces the peaking versus capacitive load (inverting gain
configuration, gain = -2).
Figure 15. In-series resistor vs. capacitive load when
TSV99x is used in follower configuration
4.2
Figure 16. Peaking versus capacitive load, with or without
feedback capacitor in inverting gain configuration
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply
pins.
4.3
Macromodel
An accurate macromodel of the TSV99x is available on STMicroelectronics’ web site at www.st.com. This model
is a trade-off between accuracy and complexity (that is, time simulation) of the TSV99x operational amplifiers. It
emulates the nominal performance of a typical device within the specified operating conditions mentioned in the
datasheet. It helps to validate a design approach and to select the right operational amplifier, however, it does not
replace on-board measurements.
DS4975 - Rev 15
page 12/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Package information
5
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.
DS4975 - Rev 15
page 13/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
SOT23-5 package information
5.1
SOT23-5 package information
Figure 17. SOT23-5 package outline
Table 6. SOT23-5 mechanical data
Dimensions
Millimeters
Ref.
A
Min.
Typ.
Max.
Min.
Typ.
Max.
0.90
1.20
1.45
0.035
0.047
0.057
A1
DS4975 - Rev 15
Inches
0.15
0.006
A2
0.90
1.05
1.30
0.035
0.041
0.051
B
0.35
0.40
0.50
0.014
0.016
0.020
C
0.09
0.15
0.20
0.004
0.006
0.008
D
2.80
2.90
3.00
0.110
0.114
0.118
D1
1.90
0.075
e
0.95
0.037
E
2.60
2.80
3.00
0.102
0.110
0.118
F
1.50
1.60
1.75
0.059
0.063
0.069
L
0.10
0.35
0.60
0.004
0.014
0.024
K
0 degrees
10 degrees
0 degrees
10 degrees
page 14/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN8 2 x 2 package information
5.2
DFN8 2 x 2 package information
Figure 18. DFN8 2 x 2 package outline
Table 7. DFN8 2 x 2 mechanical data
Dimensions
Millimeters
Ref.
A
Min.
Typ.
Max.
Min.
Typ.
Max.
0.51
0.55
0.60
0.020
0.022
0.024
A1
0.05
A3
0.002
0.15
0.006
b
0.18
0.25
0.30
0.007
0.010
0.012
D
1.85
2.00
2.15
0.073
0.079
0.085
D2
1.45
1.60
1.70
0.057
0.063
0.067
E
1.85
2.00
2.15
0.073
0.079
0.085
E2
0.75
0.90
1.00
0.030
0.035
0.039
e
DS4975 - Rev 15
Inches
0.50
0.020
L
0.425
0.017
ddd
0.08
0.003
page 15/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN8 2 x 2 package information
Figure 19. DFN8 2 x 2 recommended footprint
Note:
DS4975 - Rev 15
The exposed pad of the DFN8 2x2 package is not internally connected. It can be set to VCC- or left floating.
page 16/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN6 1.3 x 1.6 x 0.55 package information
5.3
DFN6 1.3 x 1.6 x 0.55 package information
Figure 20. DFN6 1.3 x 1.6 x 0.55 package outline
DS4975 - Rev 15
page 17/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN6 1.3 x 1.6 x 0.55 package information
Table 8. DFN6 1.3 x 1.6 x 0.55 mechanical data
Dimensions
Millimeters
Ref.
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
0.50
0.55
0.60
0.020
0.022
0.024
A1
0.00
0.02
0.05
0.000
0.001
0.002
A3
B
0.15
0.15
0.20
0.006
0.25
0.006
0.008
D
1.30
0.051
E
1.60
0.063
e
0.40
0.016
L
0.453
0.553
0.653
0.018
0.022
N
6
0.236
aaa
0.05
0.002
bbb
0.07
0.003
ccc
0.10
0.004
ddd
0.05
0.002
eee
0.08
0.003
0.010
0.026
Figure 21. DFN6 1.3 x 1.6 x 0.55 recommended footprint
DS4975 - Rev 15
page 18/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
MiniSO8 package information
5.4
MiniSO8 package information
Figure 22. MiniSO8 package outline
Table 9. MiniSO8 package mechanical data
Dimensions
Millimeters
Ref.
Min.
Typ.
A
Max.
Min.
Typ.
1.1
A1
0
A2
0.75
b
Max.
0.043
0.15
0
0.95
0.030
0.22
0.40
0.009
0.016
c
0.08
0.23
0.003
0.009
D
2.80
3.00
3.20
0.11
0.118
0.126
E
4.65
4.90
5.15
0.183
0.193
0.203
E1
2.80
3.00
3.10
0.11
0.118
0.122
e
L
0.85
0.65
0.40
0.60
0.0006
0.033
0.80
0.016
0.024
0.95
0.037
L2
0.25
0.010
ccc
0°
0.037
0.026
L1
k
DS4975 - Rev 15
Inches
8°
0.10
0°
0.031
8°
0.004
page 19/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
SO8 package information
5.5
SO8 package information
Figure 23. SO8 package outline
Table 10. SO8 package mechanical data
Dimensions
Millimeters
Ref.
Min.
Typ.
A
Max.
Min.
Typ.
1.75
0.25
Max.
0.069
A1
0.10
A2
1.25
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.010
D
4.80
4.90
5.00
0.189
0.193
0.197
E
5.80
6.00
6.20
0.228
0.236
0.244
E1
3.80
3.90
4.00
0.150
0.154
0.157
e
0.004
0.010
0.049
1.27
0.050
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
L1
k
ccc
DS4975 - Rev 15
Inches
1.04
0°
0.040
8°
0.10
0°
8°
0.004
page 20/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
SO14 package information
5.6
SO14 package information
Figure 24. SO14 package outline
Table 11. SO14 package mechanical data
Dimensions
Millimeters
Ref.
Min.
Typ.
Inches
Max.
Min.
Max.
A
1.35
1.75
0.05
0.068
A1
0.10
0.25
0.004
0.009
A2
1.10
1.65
0.04
0.06
B
0.33
0.51
0.01
0.02
C
0.19
0.25
0.007
0.009
D
8.55
8.75
0.33
0.34
E
3.80
4.0
0.15
0.15
e
1.27
0.05
H
5.80
6.20
0.22
0.24
h
0.25
0.50
0.009
0.02
L
0.40
1.27
0.015
0.05
k
ddd
DS4975 - Rev 15
Typ.
8° (max.)
0.10
0.004
page 21/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
TSSOP14 package information
5.7
TSSOP14 package information
Figure 25. TSSOP14 package outline
aaa
Table 12. TSSOP14 package mechanical data
Dimensions
Millimeters
Ref.
Min.
Typ.
A
Max.
Min.
Typ.
1.20
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.90
5.00
5.10
0.193
0.197
0.201
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.176
e
L
k
aaa
1.00
0.65
0.45
L1
DS4975 - Rev 15
Inches
0.60
0.0256
0.75
0.018
1.00
0°
0.024
0.030
0.039
8°
0.10
0°
8°
0.004
page 22/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Ordering information
6
Ordering information
Table 13. Order code
Order code
Temperature range
TSV991ILT
TSV991IQ2T
TSV991AIQ1T
K129
K1F
K1E
DFN6 1.3x1.6x0.55
TSV992IST
K5
K132
MiniSO8
K135
-40 °C to 125 °C
V992I
SO8
TSV992AIDT
TSV992IQ2T
V992AI
DFN8 2x2
TSV994IPT
K38
V994I
TSSOP14
TSV994AIPT
TSV994IDT
SO14
TSV994AIDT
TSV991IYLT
SOT23-5
TSV991AIYLT
Marking
K130
DFN8 2x2
TSV991AIQ2T
TSV992IDT
Packing
SOT23-5
TSV991AILT
TSV992AIST
Package
V994AI
Tape and reel
V994I
V994AI
K149
K150
TSV991IYDT
V991IY
TSV991AIYDT
V991AY
SO8
TSV992IYDT
TSV992AIYDT
TSV992IYST
TSV992AIYST
TSV994IYDT
TSV994AIYDT
TSV994IYPT
TSV994AIYPT
V992IY
V992AY
-40 °C to 125 °C
automotive grade (1)
MiniSO8
SO14
TSSOP14
K149
K150
V994IY
V994AY
V994IY
V994AY
1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 &
Q 002 or equivalent.
Note:
DS4975 - Rev 15
In the table above, all packages except the SO14 are "moisture sensitivity level 1" as per JEDEC J-STD-020-C.
SO14 is JEDEC level 3.
page 23/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Revision history
Table 14. Document revision history
Date
Revision
Changes
10-Mar-2014
10
Table 13: "Order codes": added new commercial product TSV991AIQ2T; corrected “Marking” error for
TSV991IQ2T from K1E to K1F.
12-Jun-2015
11
Added DFN6 1.3 x 1.6 x 0.55 package for new order code TSV991AIQ1T.
Updated "L" dimension of Section 4: "DFN8 2 x 2 mm (NB) package information".
Updated min "k" value of Section 4.5: "SO8 package information".
Table 3, Table 4, and Table 5: modified that RL = 600 Ω (not 600 kΩ) for the high-level and low-level
output voltage parameters.
27-Nov-2015
12
Section 5.2: updated name of package and titles of drawings and table; added note about exposed
pad.
Section 5.3: updated name of package.
03-Apr-2018
13
Updated cover image and Table 13. Order code.
19-Jun-2019
14
Updated the related product table in cover page.
14-Sep-2022
15
DS4975 - Rev 15
Updated figure on the cover page.
Added TSV991IYDT and TSV991AIYDT new order codes in Table 13. Order code.
page 24/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Contents
Contents
1
Absolute maximum ratings and operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Electrical characteristic curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4
Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5
6
4.1
Driving resistive and capacitive loads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2
PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3
Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
5.1
SOT23-5 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.2
DFN8 2 x 2 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.3
DFN6 1.3 x 1.6 x 0.55 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.4
MiniSO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.5
SO8 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.6
SO14 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.7
TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DS4975 - Rev 15
page 25/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Absolute maximum ratings (AMR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SOT23-5 mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN8 2 x 2 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN6 1.3 x 1.6 x 0.55 mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MiniSO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SO14 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TSSOP14 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DS4975 - Rev 15
. 2
. 3
. 4
. 6
. 7
14
15
18
19
20
21
22
23
24
page 26/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
List of figures
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
DS4975 - Rev 15
Input offset voltage distribution at T = 25 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input offset voltage distribution at T = 125 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply current vs. input common-mode voltage at VCC = 2.5 V . . . . . . . . . . . . . . . . . . . . . . . . .
Supply current vs. input common-mode voltage at VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current vs. output voltage at VCC = 2.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current vs. output voltage at VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage gain and phase vs. frequency at VCC = 5 V and Vicm = 0.5 V. . . . . . . . . . . . . . . . . . . . .
Voltage gain and phase vs. frequency at VCC = 5 V and Vicm = 2.5 V. . . . . . . . . . . . . . . . . . . . .
Positive slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Negative slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Distortion + noise vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Distortion + noise vs. output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Noise vs. frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply current vs. supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
In-series resistor vs. capacitive load when TSV99x is used in follower configuration . . . . . . . . . .
Peaking versus capacitive load, with or without feedback capacitor in inverting gain configuration .
SOT23-5 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN8 2 x 2 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN8 2 x 2 recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN6 1.3 x 1.6 x 0.55 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFN6 1.3 x 1.6 x 0.55 recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MiniSO8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SO8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SO14 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TSSOP14 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 9
. 9
. 9
. 9
. 9
. 9
10
10
10
10
10
10
11
11
12
12
14
15
16
17
18
19
20
21
22
page 27/28
TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
IMPORTANT NOTICE – READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names
are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2022 STMicroelectronics – All rights reserved
DS4975 - Rev 15
page 28/28
工商网监
湘ICP备2023018690号
