TYN1212RG

TYN1212 12 A SCR Features ■ On-state rms current 12 A ■ Gate trigger current 20 µs Tj = 25 °C MAX. 1.5 V VGD VD = VDRM, RL = 3.3 kΩ pulse duration >20 Tj = 125 °C MIN. 0.2 V IT = 100 mA Tj = 25 °C MAX. 30 mA Tj =125 °C MIN. 200 V/µs Tj = 25 °C MAX. 1.6 V 10 µA 3 mA IH Gate open dV/dt Linear slope VD = 67% VDRM VTM ITM = 24 A IDRM IRRM VDRM = VRRM = 1200 V gate open tp = 10 ms Tj = 25 °C MAX. Tj = 125 °C tgt Turn-on time IG = 40 mA, dIG/dt = 0.45 A/µs, IT = 24 A VDRM Tj = 25 °C TYP. 2 µs tq Circuit commutated turn-off time IT = 10 A, VR = 25 V, dIR/dt = 30 A/µs dV/dt = 50 V/µs Tj = 125 °C TYP. 50 µs Value Unit 3.8 °C/W Table 4. Thermal resistance Symbol Rth(j-c) 2/5 Gate open Parameter Junction to case (DC) Doc ID 022532 Rev 1 TYN1212 2 Package information Package information ● Epoxy meets UL94, V0 ● Recommended torque value: 0.4 to 0.6 N·m ● Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 5. TO-220AB dimensions Dimensions Ref. Millimeters Min. A ØI 15.20 a1 C B b2 L F A I4 Typ. Max. Inches Min. Typ. 15.90 0.598 3.75 Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.151 I4 15.80 16.40 16.80 0.622 0.646 0.661 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 l3 c2 a1 l2 a2 M b1 e c1 M Doc ID 022532 Rev 1 2.60 0.102 3/5 Ordering information 3 Ordering information Table 6. 4 Ordering information Order code Marking Package Weight TYN1212RG TYN1212 TO-220AB 2.3 g Revision history Table 7. 4/5 TYN1212 Document revision history Date Revision 25-Nov-2011 1 Changes First issue. Doc ID 022532 Rev 1 Base qty Delivery mode 50 Tube TYN1212 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 022532 Rev 1 5/5