ULN2001A

ULN2001, ULN2002 ULN2003, ULN2004 Seven Darlington arrays Datasheet - production data Description DIP-16L The ULN2001, ULN2002, ULN2003 and ULN 2004 are high-voltage, high-current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel is rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. SO-16 (Narrow) The versions interface to all common logic families: ULN2001 (general purpose, DTL, TTL, PMOS, CMOS); ULN2002 (14 - 25 V PMOS); ULN2003 (5 V TTL, CMOS); ULN2004 (6 - 15 V CMOS, PMOS). TSSOP16 Features • Seven Darlingtons per package • Output current 500 mA per driver (600 mA peak) • Output voltage 50 V • Integrated suppression diodes for inductive loads • Outputs can be paralleled for higher current • TTL/CMOS/PMOS/DTL compatible inputs • Input pins placed opposite to output pins to simplify layout November 2021 This is information on a product in full production. These versatile devices are useful for driving a wide range of loads including solenoids, relay DC motors, LED display filament lamps, thermal printheads and high-power buffers. The ULN2001A/2002A/2003A and 2004A are supplied in a 16-pin DIP package with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as ULN2001D1/2002D1/2003D1/ 2004D1. ULN2003 is also available in TSSOP16 package, for reduced application space. DocID5279 Rev 14 1/21 www.st.com Contents ULN2001, ULN2002, ULN2003, ULN2004 Contents 1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 7.1 DIP-16L package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 7.2 SO-16 Narrow package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7.3 TSSOP16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 8 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2/21 DocID5279 Rev 14 ULN2001, ULN2002, ULN2003, ULN2004 1 Diagram Diagram Figure 1. Schematic diagram ULN2001 (each driver) ULN2002 (each driver) ULN2003 (each driver) ULN2004 (each driver) DocID5279 Rev 14 3/21 21 Pin configuration 2 ULN2001, ULN2002, ULN2003, ULN2004 Pin configuration Figure 2. Pin connections (top view) 4/21 DocID5279 Rev 14 ULN2001, ULN2002, ULN2003, ULN2004 3 Maximum ratings Maximum ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VO Output voltage 50 V VI Input voltage (for ULN2002A/D - 2003A/D - 2004A/D) 30 V IC Continuous collector current 500 mA IB Continuous base current 25 mA IF Clamping diode continuous current 350 mA VR Clamping diode reverse voltage 50 V TA Operating ambient temperature range - 40 to 85 °C Storage temperature range - 55 to 150 °C 150 °C 2 kV TSTG TJ ESD Junction temperature Electrostatic discharge rating - HBM Table 2. Thermal data Note: Symbol Parameter DIP-16 SO-16 TSSOP16 Unit RthJA Thermal resistance junction-ambient, Max. 70 64.7 93.3 °C/W RthJC Thermal resistance junction-case (top), Max. 22 30.7 °C/W RthJB Thermal resistance junction-board, Max. 31.5 68.5 °C/W Maximum power dissipation is a function of TJ(max), RthJA and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA) / RthJA. Operating at the absolute maximum TJ of +150°C can affect reliability. DocID5279 Rev 14 5/21 21 Electrical characteristics 4 ULN2001, ULN2002, ULN2003, ULN2004 Electrical characteristics TA = 25 °C unless otherwise specified. Table 3. Electrical characteristics Symbol ICEX Parameter Output leakage current Collector-emitter saturation VCE(SAT) voltage (Figure 5) II(ON) II(OFF) VI(ON) Input current (Figure 6) Test condition TA = 85 °C, VCE = 50 V (Figure 3) 100 TA = 85 °C for ULN2002, VCE = 50 V, VI = 6 V (Figure 4) 500 TA = 85 °C for ULN2002, VCE = 50 V, VI = 1V (Figure 4) 500 IC = 100 mA, IB = 250 µA 0.9 1.1 IC = 200 mA, IB= 350 µA 1.1 1.3 IC = 350 mA, IB= 500 µA 1.3 1.6 for ULN2002, VI = 17 V 0.82 1.25 for ULN2003, VI = 3.85 V 0.93 1.35 for ULN2004, VI = 5 V VI = 12 V 0.35 0.5 1 1.45 Input voltage (Figure 8) VCE= 2 V, for ULN2002 IC = 300 mA for ULN2003 IC = 200 mA IC = 250 mA IC = 300 mA for ULN2004 IC = 125 mA IC = 200 mA IC = 275 mA IC = 350 mA CI Input capacitance tPLH Turn-on delay time tPHL Max. 50 TA = 85 °C, IC = 500 µA DC Forward current gain (Figure 5) Typ. VCE = 50 V, (Figure 3) Input current (Figure 7) hFE Min. for ULN2001, VCE = 2 V, IC = 350 mA 50 65 Unit µA V mA µA 13 2.4 2.7 3 V 5 6 7 8 1000 15 25 pF 0.5 VI to 0.5 VO 0.25 1 µs Turn-off delay time 0.5 VI to 0.5 VO 0.25 1 µs IR Clamp diode leakage current (Figure 9) VR = 50 V 50 TA = 85 °C, VR = 50 V 100 VF Clamp diode forward voltage (Figure 10) 6/21 IF = 350 mA DocID5279 Rev 14 1.7 2 µA V ULN2001, ULN2002, ULN2003, ULN2004 5 Test circuits Test circuits Figure 3. Output leakage current Figure 4. Output leakage current (for ULN2002 only) Figure 5. Collector-emitter saturation voltage Figure 6. Input current (ON) Figure 7. Input current (OFF) Figure 8. Input voltage DocID5279 Rev 14 7/21 21 Test circuits ULN2001, ULN2002, ULN2003, ULN2004 Figure 9. Clamp diode leakage current 8/21 Figure 10. Clamp diode forward voltage DocID5279 Rev 14 ULN2001, ULN2002, ULN2003, ULN2004 6 Typical performance characteristics Typical performance characteristics Figure 11. Collector current vs. saturation voltage (TJ = 25 °C) Figure 12. Collector current vs. saturation voltage I OUT [mA] 85°C 25°C -30°C IIN = 500 µA VCESAT [V] Figure 13. Input current vs. input voltage Figure 14. Input current vs. input voltage (Ta = 25 °C) ULN2003A ULN2003A Ta = 25°C Iout=100 mA Io ut=200mA Max Iou t=300mA Typ Min Figure 15. Collector current vs. input current Figure 16. hFE vs. output current 85 °C I OUT [mA] -30 °C 25 °C VCE = 2 V DC Current Transfer Ratio (hFE) 10000 VCE = 2 V 85 °C 1000 -40 °C 25 °C 100 10 1 1 10 100 1000 Output current IOUT [mA] IIN [μA] DocID5279 Rev 14 9/21 21 Typical performance characteristics ULN2001, ULN2002, ULN2003, ULN2004 Figure 17. Peak collector current vs. duty cycle Figure 18. Peak collector current vs. duty cycle (DIP-16) (SO-16) Ic peak (mA) D96IN451 NUMBER OF ACTIVE OUTPUT 7 6 5 500 4 3 2 Ic peak (mA) D96IN452A Tamb=70°C (SO16) 500 400 400 300 300 Tamb=70°C (DIP16) 2 3 5 200 200 7 100 100 0 0 NUMBER OF ACTIVE OUTPUT 10/21 0 20 40 60 80 DC DocID5279 Rev 14 0 20 40 60 80 100 DC ULN2001, ULN2002, ULN2003, ULN2004 7 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 7.1 DIP-16L package information Figure 19. DIP-16L package outline 0015895_E DocID5279 Rev 14 11/21 21 Package information ULN2001, ULN2002, ULN2003, ULN2004 Table 4. DIP-16L mechanical data mm. Dim. Min. Typ. A 5.33 A1 0.38 A2 2.92 3.30 4.95 b 0.36 0.46 0.56 b2 1.14 1.52 1.78 c 0.20 0.25 0.36 D 18.67 19.18 19.69 E 7.62 7.87 8.26 E1 6.10 6.35 7.11 e 2.54 e1 17.78 eA 7.62 eB L 12/21 Max. 10.92 2.92 DocID5279 Rev 14 3.30 3.81 ULN2001, ULN2002, ULN2003, ULN2004 7.2 Package information SO-16 Narrow package information Figure 20. SO-16 package outline DocID5279 Rev 14 13/21 21 Package information ULN2001, ULN2002, ULN2003, ULN2004 Table 5. SO-16 Narrow mechanical data mm. inch. Dim. Min. Typ. A a1 Max. Typ. 1.75 0.1 0.25 a2 Max. 0.069 0.004 0.009 1.6 0.063 b 0.35 0.46 0.014 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 c1 0.020 45° (typ.) D(1) 9.8 10 0.386 0.394 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F(1) 3.8 4.0 0.150 0.157 G 4.60 5.30 0.181 0.208 L 0.4 1.27 0.150 0.050 M 0.62 S 14/21 Min. 0.024 8° (max.) DocID5279 Rev 14 ULN2001, ULN2002, ULN2003, ULN2004 Package information Figure 21. SO-16 Narrow tape and reel drawing 1 ' & $ 7 3R %R .R $R 3 1RWH'UDZLQJQRWLQVFDOH Table 6. SO-16 Narrow tape and reel mechanical data mm. Dim. Min. A Typ. Max. - 330 C 12.8 - 13.2 D 20.2 - - N 60 - - T - - 22.4 Ao 6.45 - 6.65 Bo 10.3 - 10.5 Ko 2.1 - 2.3 Po 3.9 - 4.1 P 7.9 - 8.1 DocID5279 Rev 14 15/21 21 Package information 7.3 ULN2001, ULN2002, ULN2003, ULN2004 TSSOP16 package information Figure 22. TSSOP16 package outline L D % 5'#6+0) 2.#0' & - - 
NN ("(&
1-"/& & " "  CCC % % C  F "  1*/

*%&/5*'*$"5*0/ 16/21 DocID5279 Rev 14   ULN2001, ULN2002, ULN2003, ULN2004 Package information Table 7. TSSOP16 mechanical data mm. Dim. Min. Typ. Max. A 1.20 A1 0.05 0.15 A2 0.90 1.00 1.05 A3 0.39 0.44 0.49 b 0.20 b1 0.19 c 0.13 c1 0.12 0.13 0.14 D 4.90 5.00 5.10 E 6.20 6.40 6.60 E1 4.30 4.40 4.50 0.28 0.22 0.25 0.17 e 0.65 BSC L 0.45 0.60 L1 0.75 1.00 BSC 0 ʘ 8° Figure 23. TSSOP16 recommended footprint (dimensions are in mm)      DocID5279 Rev 14 17/21 21 Package information ULN2001, ULN2002, ULN2003, ULN2004 Figure 24. TSSOP16 tape and reel drawing 1 ' & $ 7 3R %R .R $R 3 1RWH'UDZLQJQRWLQVFDOH Table 8. TSSOP16 tape and reel mechanical data mm. Dim. Min. A 18/21 Typ. Max. - 330 C 12.8 - 13.2 D 20.2 - - N 60 - - T - - 22.4 Ao 6.7 - 6.9 Bo 5.3 - 5.5 Ko 1.6 - 1.8 Po 3.9 - 4.1 P 7.9 - 8.1 DocID5279 Rev 14 ULN2001, ULN2002, ULN2003, ULN2004 8 Order codes Order codes Table 9. Order codes Part number Package ULN2001A DIP-16 ULN2002A DIP-16 ULN2003A DIP-16 ULN2004A DIP-16 ULN2001D1013TR SO-16 in tape and reel ULN2002D1013TR SO-16 in tape and reel ULN2003D1013TR SO-16 in tape and reel ULN2004D1013TR SO-16 in tape and reel ULN2003TTR TSSOP16 in tape and reel DocID5279 Rev 14 19/21 21 Revision history 9 ULN2001, ULN2002, ULN2003, ULN2004 Revision history Table 10. Revision history 20/21 Date Revision Changes 05-Dec-2006 5 Order code updated and document reformatted. 28-Aug-2007 6 Added Table 1 in cover page. 07-May-2012 7 Modified: Figure 12 on page 9. Added: Figure 13, 14, 15 and Figure 16 on page 9. 01-Jun-2012 8 Updated: DIP-16L package mechanical data Table 4 on page 12 and Figure 19 on page 11. 22-Jul-2015 9 Added Plastic DIP16-L package. Removed Device summary table. Updated Table 7: Order code. Added Section 7.2: Plastic DIP-16L package information. Minor text changes. 07-Nov-2017 10 Removed plastic DIP-16L package and associated order code ULN2003A 27-Jun-2018 11 Updated: II(ON) test condition in Table 3: Electrical characteristics. 09-Jul-2019 12 Added IF, VR, ESD parameters in Table 1: Absolute maximum ratings and note in Table 2: Thermal data. 23-Jul-2020 13 Added new part number ULN2003TTR in Table 9: Order codes and new Section 7.3: TSSOP16 package information. 30-Nov-2021 14 Updated Table 7: TSSOP16 mechanical data. DocID5279 Rev 14 ULN2001, ULN2002, ULN2003, ULN2004 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2021 STMicroelectronics – All rights reserved DocID5279 Rev 14 21/21 21