V994AI

TSV991-TSV992-TSV994 Rail-to-rail input/output 20MHz GBP operational amplifiers Features ■ ■ ■ ■ ■ ■ ■ ■ ■ Low input offset voltage: 1.5mV max Rail-to-rail input and output Wide bandwidth 20MHz, stable for gain ≥3 Low power consumption: 1.1mA maximum High output current: 35mA Operating from 2.5V to 5.5V Low input bias current, 1pA typ ESD internal protection ≥ 5kV Latch-up immunity Pin connections (top view) SOT23-5 Output VDD Non Inverting Input 1 2 3 4 Inverting Input 5 VCC MSO-8, SO-8 Output 1 Inverting Input 1 Non Inverting Input 1 VDD 1 2 3 4 _ + _ + 8 7 6 5 VCC Output 2 Inverting Input 2 Non Inverting Input 2 Description The TSV991/2/4 family of single, dual & quad operational amplifiers offers low voltage operation and rail-to-rail input and output. This family features an excellent speed/power consumption ratio, offering a 20MHz gainbandwidth, stable for gain above 3 (100pF capacitive load), while consuming only 1.1mA max at 5V supply voltage. It also features an ultralow input bias current. These characteristics make the TSV991/2/4 family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering. SO-14, TSSOP14 Output 1 Inverting Input 1 Non Inverting Input 1 VCC Non Inverting Input 2 Inverting Input 2 Output 2 1 2 3 4 5 6 7 + _ + _ _ + _ + 14 Output 4 13 Inverting Input 4 12 Non Inverting Input 4 11 VDD 10 Non Inverting Input 3 9 8 Inverting Input 3 Output 3 Applications ■ ■ ■ ■ ■ Battery-powered applications Portable devices Signal conditioning Active filtering Medical instrumentation December 2006 Rev 3 1/18 www.st.com 18 Contents TSV991-TSV992-TSV994 Contents 1 2 3 4 5 Absolute maximum ratings & operating conditions . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 TSV991-TSV992-TSV994 Absolute maximum ratings & operating conditions 1 Absolute maximum ratings & operating conditions Table 1. Symbol VCC Vid Vin Tstg Supply voltage(1) Differential input voltage Input voltage (3) (2) Absolute maximum ratings (AMR) Parameter Value 6 ±VCC VDD-0.2 to VCC+0.2 -65 to +150 (4) (5) Unit V V V °C Storage temperature Thermal resistance junction to ambient SOT23-5 250 125 190 103 100 °C/W Rthja SO-8 MiniSO-8 SO-14 TSSOP14 Thermal resistance junction to case SOT23-5 81 40 39 31 32 150 5 400 1500 750 200 °C kV V V mA model(6) model(8) °C/W Rthjc SO-8 MiniSO8 SO14 TSSOP14 Tj Maximum junction temperature HBM: human body MM: machine model(7) ESD CDM: charged device SOT23-5, SO-8, MSO8, SO14 TSSOP14 Latch-up immunity 1. Value with respect to VDD pin. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. VCC-Vin must not exceed 6V. 4. Short-circuits can cause excessive heating and destructive dissipation. 5. Rth are typical values. 6. Human body model: 100pF discharged through a 1.5kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 7. Machine model: 200pF is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5Ω), done for all couples of pin combinations with other pins floating. 8. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. 3/18 Absolute maximum ratings & operating conditions Table 2. Symbol VCC Vicm Toper Supply voltage Common mode input voltage range Operating free air temperature range TSV991-TSV992-TSV994 Operating conditions Parameter Value 2.5 to 5.5 VDD -0.1 to VCC +0.1 -40 to +125 Unit V V °C 4/18 TSV991-TSV992-TSV994 Electrical characteristics 2 Table 3. Symbol Electrical characteristics Electrical characteristics at VCC = +2.5V, VDD = 0V, Vicm = VCC/2, Tamb= 25°C, RL connected to VCC/2 (unless otherwise specified) Parameter Conditions Min. Typ. Max. Unit DC performance Offset voltage TSV99x Vio TSV99xA Tmin < Top < Tmax DVio Iio Iib CMR Avd Input offset voltage drift Input offset (Vout = VCC/2) current(1) 0V to 2.5V, Vout = 1.25V RL= 10kΩ Vout= 0.5V to 2V , RL = 10kΩ RL = 600Ω RL = 10kΩ RL = 600Ω Vo = 2.5V Tmin < Tamb < Tmax Vo = 0V Tmin < Tamb < Tmax No load, Vout=VCC/2 Tmin < Top < Tmax 18 16 18 16 58 80 2 1 1 75 89 15 45 15 45 32 35 0.78 3 10 10 40 150 40 150 mA 1.1 mA 1.1 µV/°C pA pA dB dB mV mV Tmin < Top < Tmax 0.1 4.5 7.5 mV 1.5 Input bias current(1) (Vout = VCC/2) Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain VCC-VOH High level output voltage VOL Low level output voltage Isink Iout Isource ICC Supply current (per operator) AC performance GBP φm Gm SR en Gain bandwidth product Phase margin Gain margin Slew rate Equivalent input noise voltage RL = 2kΩ CL = 100pF, f = 100kHz , RL = 2kΩ, CL = 100pF, G=5, f=100kHz RL = 2kΩ, CL = 100pF, φm=40° RL = 2kΩ, CL = 100pF f=10kHz G=1, f=1kHz, Rl=2kΩ, BW=22kHz, Vicm=(Vcc+1)/2, Vout=1.1Vpp 20 60 2.5 10 21 MHz Degrees dB V/µs nV ----------Hz THD+en Total harmonic distortion 1. Guaranteed by design. - 0.0017 - % 5/18 Electrical characteristics Table 4. Symbol DC performance Offset voltage TSV99x Vio TSV99xA Tmin < Top < Tmax DVio Iio Iib CMR Avd Input offset voltage drift Input offset current (1) TSV991-TSV992-TSV994 Electrical characteristics at VCC = +3.3V, VDD = 0V, Vicm = VCC/2, Tamb= 25°C, RL connected to VCC/2 (unless otherwise specified) Parameter Conditions Min. Typ. Max. Unit Tmin < Top < Tmax 0V to 3.3V, Vout = 1.65V RL=10kΩ Vout= 0.5V to 2.8V , RL = 10kΩ RL = 600Ω RL = 10kΩ RL = 600Ω Vo = 3.3V Tmin < Tamb < Tmax Vo = 0V Tmin < Tamb < Tmax No load, Vout=VCC/2 Tmin < Top < Tmax 18 16 18 16 60 80 0.1 2 1 1 78 90 15 45 15 45 32 35 0.8 - 4.5 7.5 mV 1.5 3 10 10 40 150 40 150 mA 1.1 mA 1.1 µV/°C pA pA dB dB mV mV Input bias current(1) Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain VCC-VOH High level output voltage VOL Low level output voltage Isink Iout Isource ICC Supply current (per operator) AC performance GBP φm Gm SR en Gain bandwidth product Phase margin Gain margin Slew rate Equivalent input noise voltage RL = 2kΩ CL = 100pF, f = 100kHz , RL = 2kΩ, CL = 100pF, G=5 , RL = 2kΩ CL = 100pF, f = 100kHz, φm=40° , RL = 2kΩ CL = 100pF, f = 100kHz f=10kHz G=1, f=1kHz, Rl=2kΩ, BW=22kHz, Vicm=(Vcc+1)/2, Vout=1.9Vpp 20 60 2.5 10 21 MHz Degrees dB V/µs nV ----------Hz THD+en Total harmonic distortion - 0.001 - % 1. Guaranteed by design. 6/18 TSV991-TSV992-TSV994 Table 5. Symbol DC performance Offset voltage TSV99x Vio TSV99xA Tmin < Top < Tmax DVio Iio Iib CMR SVR Avd Input offset voltage drift Input offset current (1) Electrical characteristics Electrical characteristics at VCC = +5V, VDD = 0V, Vicm = VCC/2, Tamb = 25°C, RL connected to VCC/2 (unless otherwise specified) Parameter Conditions Min. Typ. Max. Unit Tmin < Top < Tmax 0V to 5V, Vout = 2.5V VCC = 2.5 to 5V RL=10kΩ Vout= 0.5V to 4.5V , RL = 10kΩ RL = 600Ω RL = 10kΩ RL = 600Ω Vo = 5V Tmin < Tamb < Tmax Vo = 0V Tmin < Tamb < Tmax No load, Vout=2.5V Tmin < Top < Tmax 18 16 18 16 62 70 80 0.1 2 1 1 82 86 91 15 45 15 45 32 35 0.82 - 4.5 7.5 mV 1.5 3 10 10 40 150 40 150 mA 1.1 mA 1.1 µV/°C pA pA dB dB dB mV mV Input bias current(1) Common mode rejection ratio 20 log (ΔVic/ΔVio) Supply voltage rejection ratio 20 log (ΔVcc/ΔVio) Large signal voltage gain VCC-VOH High level output voltage VOL Low level output voltage Isink Iout Isource ICC Supply current (per operator) AC performance GBP φm Gm SR en Gain bandwidth product Phase margin Gain margin Slew rate Equivalent input noise voltage RL = 2kΩ CL = 100pF, , f = 100kHz RL = 2kΩ, CL = 100pF, G=5 RL = 2kΩ, CL=100pF, φm=40° , RL = 2kΩ CL = 100pF f=10kHz G=1, f=1kHz, Rl=2kΩ, BW=22kHz, Vicm=(Vcc+1)/2, Vout=3.6Vpp 20 60 2.5 10 21 MHz Degrees dB V/µs nV ----------Hz THD+en Total harmonic distortion - 0.0007 - % 1. Guaranteed by design. 7/18 Electrical characteristics TSV991-TSV992-TSV994 Figure 1. Input offset voltage distribution at T=25°C Figure 2. Input offset voltage distribution at T=125°C 40 ° ° 30 Quantity of parts 20 10 0 -5 -4 -3 -2 -1 0 1 2 3 4 5 Input offset Voltage (mV) Figure 3. Supply current vs. input common mode voltage at VCC=2.5V Figure 4. Supply current vs. input common mode voltage at VCC=5V Figure 5. Output current vs. output voltage at Figure 6. VCC=2.5V Output current vs. output voltage at VCC=5V 8/18 TSV991-TSV992-TSV994 Electrical characteristics Figure 7. Voltage gain and phase vs Figure 8. frequency at VCC=5V and Vicm=0.5V 200 160 120 Phase 80 Phase (°) Voltage gain and phase vs frequency at VCC=5V and Vicm=2.5V 50 40 30 20 Gain (dB) 0 -10 -20 -30 -40 -50 4 10 Gain 0 -40 -80 Vcc=5V, Vicm=0.5V Cl=100pF, Rl=2KOhm, Vrl=Vcc/2 Tamb=25 C 10 5 -120 -160 10 7 10 6 10 8 -200 Frequency (Hz) Figure 9. Positive slew rate Figure 10. Negative slew rate Vin : from 0.5V to Vcc-0.5V SR : calculated from 10% to 90% Vin : from 0.5V to Vcc-0.5V SR : calculated from 10% to 90% Figure 11. Distortion + noise vs. frequency Figure 12. Distortion + noise vs. output voltage 0.01 Vcc=2.5V THD + N (%) 0.100 THD + N (%) 1E-3 0.010 f=1kHz Rl=2kOhms Gain=1 BW=22kHz Vicm=(Vcc+1V)/2 1E-4 10 100 1000 10000 100000 0.001 0.01 0.1 Output Voltage (V) 1 9/18 Phase (°) 10 40 Electrical characteristics TSV991-TSV992-TSV994 Figure 13. Noise vs. frequency Equivalent Input Voltage Noise (nV/VHz) 100 Vicm=0.5V 10 10 100 1000 10000 10/18 TSV991-TSV992-TSV994 Package information 3 Package information In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: www.st.com. Figure 14. SOT23-5 package Dimensions Ref. Min. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50 0.95 1.9 0.55 13.7 Millimeters Typ. Max. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 Min. 35.4 0.00 35.4 13.7 3.5 110.2 102.3 59.0 37.4 74.8 21.6 Mils Typ. Max. 57.1 5.9 51.2 19.7 7.8 118.1 118.1 68.8 11/18 Package information Figure 15. MiniSO-8 package Dimensions Ref. Min. A A1 A2 b c D E E1 e K L L1 0° 0.40 0.55 0.05 0.78 0.25 0.13 2.90 4.75 2.90 0.10 0.86 0.33 0.18 3.00 4.90 3.00 0.65 6° 0.70 0.10 0° 0.016 Millimeters Typ. Max. 1.1 0.15 0.94 0.40 0.23 3.10 5.05 3.10 0.002 0.031 0.010 0.005 0.114 0.187 0.114 Min. TSV991-TSV992-TSV994 Inches Typ. Max. 0.043 0.004 0.034 0.013 0.007 0.118 0.193 0.118 0.026 6° 0.022 0.028 0.04 0.006 0.037 0.016 0.009 0.122 0.199 0.122 12/18 TSV991-TSV992-TSV994 Figure 16. SO-8 package Dimensions Ref. Min. A A1 A2 B C D E e H h L k ddd 0.1 5.80 0.25 0.40 1.35 0.10 1.10 0.33 0.19 4.80 3.80 1.27 6.20 0.50 1.27 0.228 0.010 0.016 8° (max.) Millimeters Typ. Max. 1.75 0.25 1.65 0.51 0.25 5.00 4.00 Min. 0.053 0.04 0.043 0.013 0.007 0.189 0.150 Package information Inches Typ. Max. 0.069 0.010 0.065 0.020 0.010 0.197 0.157 0.050 0.244 0.020 0.050 0.04 13/18 Package information Figure 17. TSSOP14 package Dimensions Ref. Min. A A1 A2 b c D E E1 e K L1 0° 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8° 0.75 0° 0.018 1 Millimeters Typ. Max. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 Min. TSV991-TSV992-TSV994 Inches Typ. Max. 0.047 0.004 0.039 0.006 0.041 0.012 0.0089 0.197 0.252 0.173 0.0256 BSC 8° 0.024 0.030 0.201 0.260 0.176 A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 14/18 TSV991-TSV992-TSV994 Figure 18. SO-14 package Dimensions Ref. Min. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 1.27 7.62 4.0 5.3 1.27 0.68 8° (max.) 0.149 0.181 0.019 8.75 6.2 0.35 0.19 0.5 45° (typ.) 0.336 0.228 0.1 Millimeters Typ. Max. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.003 Min. Package information Inches Typ. Max. 0.068 0.007 0.064 0.018 0.010 0.019 0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.026 15/18 Ordering information TSV991-TSV992-TSV994 4 Ordering information Part number TSV991ILT SOT23-5 TSV991AILT Tape & reel TSV992IST MiniSO-8 TSV992AIST TSV992ID TSV992IDT SO-8 TSV992AID TSV992AIDT TSV994IPT TSSOP14 TSV994AIPT TSV994ID TSV994IDT SO-14 TSV994AID TSV994AIDT Tube or tape & reel V994AI Tape & reel V994AI V994I -40°C to +125°C Tube or tape & reel V992AI V994I K135 V992I K132 K129 Temperature range Package Packing Marking K130 16/18 TSV991-TSV992-TSV994 Revision history 5 Revision history Date 31-Jul-2006 7-Nov-2006 12-Dec-2006 Revision 1 2 3 Changes Preliminary data release for product under development. Final version of datasheet. Noise and distortion figures added. 17/18 TSV991-TSV992-TSV994 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18