VN330SP8932

VN330SP(8932) QUAD HIGH SIDE SMART POWER SOLID STATE RELAY Table 1. General Features Type VN330SP(8932) (*) Per channel (**) at Tj=85°C s s Figure 1. Package RDSon (*) 0.32Ω (**) Iout (*) 1A Vcc 36V Vdemag(*) VCC-55V OUTPUT CURRENT: 1A PER CHANNEL DIGITAL INPUTS CLAMPED AT 32V MINIMUM VOLTAGE 10 s SHORTED LOAD AND OVERTEMPERATURE PROTECTIONS BUILT-IN CURRENT LIMITER 1 s s s s PowerSO-10™ UNDERVOLTAGE SHUTDOWN OPEN DRAIN DIAGNOSTIC OUTPUT FAST DEMAGNETIZATION OF INDUCTIVE LOADS DESCRIPTION The VN330SP(8932) is a monolithic device made using STMicroelectronics VIPower M0-3 Technology, intended for driving four indipendent resistive or inductive loads with one side connected to ground. Active current limitation avoids dropping the system power supply in case of shorted load. Built-in thermal shut-down protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates short-circuit and overtemperature conditions. Table 2. Order Codes Package Tube VN330SP(8932) Tape and Reel PowerSO-10 VN330SP(8932)TR Rev. 1 September 2004 1/12 VN330SP(8932) Figure 2. Block Diagram Table 3. Absolute Maximum Ratings Symbol VCC - VCC IOUT IR IIN IDIAG VESD EAS Ptot Tj TSTG Parameter Power Supply Voltage Reverse Supply Voltage Output Current (cont.) Reverse Output Current (per channel) Input Current (per channel) DIAG Pin Current Electrostatic Discharge (Human Body Model: R=1.5KΩ; C=100pF) Single Pulse Avalanche Energy per Channel Not Simultaneously (see figure 5) Power Dissipation TC≤25°C Junction Operating Temperature Storage Temperature Value 45 - 0.3 Internally Limited -6 +/- 10 +/- 10 2000 400 Internally Limited Internally limited - 55 to 150 Unit V V A A mA mA V mJ W °C °C Figure 3. Configuration Diagram (Top View) & Suggested Connections for Unused and N.C. Pins 2/12 VN330SP(8932) Figure 4. Current and Voltage Conventions Table 4. Thermal Data Symbol Rthj-case Rthj-amb (1) (2) Parameter Thermal Resistance Junction-case (1) Thermal Resistance Junction-ambient (2) Max Max Value 2 50 Unit ° C/W ° C/W All channels ON. When mounted using minimum recommended pad size on FR-4 board. ELECTRICAL CHARACTERISTICS (10V