VN750-E
High-side driver
Datasheet − production data
Features
Type
VN750-E
VN750PT-E
VN750B5-E
VN750-12-E
RDS(on)
IOUT
VCC
60 mΩ
6A
36 V
3(17$: $77
*$3*5,
3(17$:$77
LQOLQH
*$3*5,
■
ECOPACK®: lead free and RoHS compliant
■
Automotive Grade: compliance with AEC
guidelines
3 3$.
33$ .
■
CMOS compatible input
■
On-state open-load detection
■
Off-state open-load detection
■
Shorted load protection
Description
■
Undervoltage and overvoltage shutdown
■
Protection against loss of ground
■
Very low standby current
■
Reverse battery protection
The VN750-E is a monolithic device designed in
STMicroelectronics® VIPower® M0-3 technology
intended for driving any kind of load with one side
connected to ground.
*$3*5,
*$3*5,
Active VCC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table). Active current limitation
combined with thermal shutdown and automatic
restart help protect the device against overload.
The device detects open load condition in
on-state and off-state. Output shorted to VCC is
detected in the off-state. Device automatically
turns off in case of ground pin disconnection.
Table 1.
Device summary
Order codes
Package
Tube
Tape and reel
PENTAWATT
VN750-E
-
P2PAK
VN750B5-E
VN750B5TR-E
PPAK
VN750PT-E
VN750PTTR-E
PENTAWATT in-line
VN750-12-E
-
September 2013
This is information on a product in full production.
Doc ID 10891 Rev 7
1/38
www.st.com
1
Contents
VN750-E
Contents
1
Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2
Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
4
2.1
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.4
Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5
GND protection network against reverse battery . . . . . . . . . . . . . . . . . . . 16
2.5.1
Solution 1: resistor in the ground line (RGND only) . . . . . . . . . . . . . . . . 16
2.5.2
Solution 2: diode (DGND) in the ground line . . . . . . . . . . . . . . . . . . . . . 17
2.6
Load dump protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.7
Microcontroller I/Os protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.8
Open-load detection in off-state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.9
PPAK/P2PAK maximum demagnetization energy (VCC=13.5V) . . . . . . . 19
Package and PCB thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1
P2PAK thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.2
PPAK thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Package and packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.1
ECOPACK® packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.2
PENTAWATT mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.2.1
5
2/38
PENTAWATT (in-line) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . 27
2
4.3
P PAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.4
PPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.5
PENTAWATT packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
4.6
P2PAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
4.7
PPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Doc ID 10891 Rev 7
VN750-E
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Suggested connections for unused and not connected pins . . . . . . . . . . . . . . . . . . . . . . . . 5
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Truth table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electrical transient requirements on VCC pin (part 1/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electrical transient requirements on VCC pin (part 2/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Electrical transient requirements on VCC pin (part 3/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
P2PAK thermal parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PPAK thermal parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PENTAWATT mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
PENTAWATT (in-line) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
P2PAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
PPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Doc ID 10891 Rev 7
3/38
List of figures
VN750-E
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
Figure 30.
Figure 31.
Figure 32.
Figure 33.
Figure 34.
Figure 35.
Figure 36.
Figure 37.
Figure 38.
Figure 39.
Figure 40.
Figure 41.
Figure 42.
Figure 43.
Figure 44.
4/38
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configuration diagram (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Current and voltage conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Status timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching time waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Off-state output current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
High level input current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Input clamp voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Status leakage current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Status low output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Status clamp voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
On-state resistance Vs Tcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
On-state resistance Vs VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Open-load on-state detection threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Input high level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Input low level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Input hysteresis voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Overvoltage shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Open-load off-state voltage detection threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turn-on voltage slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turn-off voltage slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Ilim Vs Tcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Application schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Open-load detection in off-state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PPAK /P2PAK maximum turn-off current versus inductance . . . . . . . . . . . . . . . . . . . . . . . 19
P2PAK PC board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
P2PAK Rthj-amb Vs. PCB copper area in open box free air condition . . . . . . . . . . . . . . . 20
P2PAK thermal impedance junction ambient single pulse . . . . . . . . . . . . . . . . . . . . . . . . . 21
P2PAK thermal fitting model of a single channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PPAK PC board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PPAK Rthj-amb Vs. PCB copper area in open box free air condition . . . . . . . . . . . . . . . . 23
PPAK thermal impedance junction ambient single pulse . . . . . . . . . . . . . . . . . . . . . . . . . 23
PPAK thermal fitting model of a single channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PENTAWATT package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
PENTAWATT (in-line) package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
P2PAK package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PPAK package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
PENTAWATT tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
P2PAK tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
P2PAK tape and reel (suffix “13TR”). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PPAK suggested pad layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
PPAK tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
PPAK tape and reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Doc ID 10891 Rev 7
VN750-E
1
Block diagram and pin description
Block diagram and pin description
Figure 1.
Block diagram
9 &&
29(592/7$*(
'(7(&7,21
9 &&
&ODPS
81'(592/7$*(
'(7(&7,21
*1'
3RZHU &/$03
'5,9(5
,1387
287387
/2*,&
&855(17
/,0,7(5
21 67$7( 23(1/2$'
'(7(&7,21
67$786
29(57(03(5$785(
'(7(&7,21
2)) 67$7( 23(1/2$'
$1' 287387 6+257(' 72 9 &&
'(7(&7,21
*$3*5,
Figure 2.
Configuration diagram (top view)
287387
67$786
9&&
,1387
*1'
33$.33$.
3(17$:$77
*$3*5,
*$3*5,
Table 2.
Suggested connections for unused and not connected pins
Connection/pin
Status
N.C.
Output
Input
Floating
X
X
X
X
To ground
X
Doc ID 10891 Rev 7
Through 10 KΩ resistor
5/38
Electrical specifications
2
VN750-E
Electrical specifications
Figure 3.
Current and voltage conventions
,6
9)
,,1
,1387
9&&
,67$7
,287
67$786
9&&
287387
*1'
9,1
967$7
9287
,*1'
*$3*5,
2.1
Absolute maximum ratings
Stress values that exceed those listed in the “Absolute maximum ratings” table can cause
permanent damage to the device. These are stress ratings only, and operation of the device
at these, or any other conditions greater than those, indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics sure
program and other relevant quality documents.
Table 3.
Absolute maximum ratings
Value
Symbol
Parameter
P2PAK
PENTAWATT
VCC
41
V
- VCC
Reverse DC supply voltage
- 0.3
V
- Ignd
DC reverse ground pin current
- 200
mA
IOUT
DC output current
Internally limited
A
-6
A
- IOUT
6/38
DC supply voltage
Unit
PPAK
Reverse DC output current
IIN
DC input current
+/- 10
mA
ISTAT
DC status current
+/- 10
mA
VESD
Electrostatic discharge
(human body model: R=1.5 KΩ;
C=100pF)
- Input
- Status
- Output
- VCC
4000
4000
5000
5000
V
V
V
V
Doc ID 10891 Rev 7
VN750-E
Electrical specifications
Table 3.
Absolute maximum ratings (continued)
Value
Symbol
Parameter
PENTAWATT
EMAX
Ptot
138
138
mJ
60
W
Internally limited
°C
Tj
Junction operating temperature
Tc
Case operating temperature
- 40 to 150
°C
Storage temperature
- 55 to 150
°C
Tstg
2.2
PPAK
Maximum switching energy
(L=2.46 mH; RL=0 Ω; Vbat=13.5 V;
Tjstart=150 °C; IL=9 A)
Power dissipation TC=25°C
Unit
P2PAK
Thermal data
Table 4.
Thermal data
Max. value
Symbol
Parameter
Unit
PENTAWATT
P2PAK
PPAK
Rthj-case
Thermal resistance junction-case
2.1
2.1
2.1
°C/W
Rthj-lead
Thermal resistance junction-lead
-
-
-
°C/W
62.1
52.1(1)
77.1(1)
°C/W
62.1
37(2)
44(2)
°C/W
Rthj-amb
Thermal resistance junction-ambient
1. When mounted on a standard single-sided FR-4 board with 0.5cm2 of Cu (at least 35µm thick). Horizontal
mounting and no artificial air flow.
2. When mounted on a standard single-sided FR-4 board with 6cm2 of Cu (at least 35µm thick). Horizontal
mounting and no artificial air flow.
2.3
Electrical characteristics
Values specified in this section are for 8 VTjsh
Ilim
Current limitation
9 V
很抱歉,暂时无法提供与“VN750PT-E”相匹配的价格&库存,您可以联系我们找货
免费人工找货