VNQ5050AK-E
Quad channel high side driver with analog current sense
for automotive applications
Features
Parameters
Max supply voltage
Symbol
Value
VCC
41 V
Operating voltage range
VCC
4.5 to 36 V
Max on-state resistance (per ch.)
RON
50 mΩ
Current limitation (typ)
ILIMH
19 A
Off-state supply current
IS
2 µA(1)
PowerSSO-24
– Reverse battery protection (see Figure 25)
– Electrostatic discharge protection
Application
■
All types of resistive, inductive and capacitive
loads.
■
Suitable as LED driver.
1. Typical value with all loads connected.
■
■
■
General features:
– Inrush current active management by
power limitation
– Very low standby current
– 3.0V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
European directive
Diagnostic functions:
– Proportional load current sense
– High current sense precision for wide
current range
– Current sense disable
– Thermal shutdown indication
– Very low current sense leakage
Protection:
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss of VCC
– Thermal shutdown
Table 1.
Description
The VNQ5050AK-E is a monolithic device made
using STMicroelectronics VIPower M0-5
technology. It is intended for driving resistive or
inductive loads with one side connected to
ground. Active VCC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table).
This device integrates an analog current sense
which delivers a current proportional to the load
current (according to a known ratio) when
CS_DIS is driven low or left open. When CS_DIS
is driven high, the CURRENT SENSE pin is in a
high impedance condition.
Output current limitation protects the device in
overload condition. In case of long overload
duration, the device limits the dissipated power to
a safe level up to thermal shutdown intervention.
Thermal shutdown with automatic restart allows
the device to recover normal operation as soon as
the fault condition disappears.
Device summary
Order codes
Package
PowerSSO-24
September 2013
Tube
Tape and Reel
VNQ5050AK-E
VNQ5050AKTR-E
Doc ID 13329 Rev 10
1/31
www.st.com
1
Contents
VNQ5050AK-E
Contents
1
Block diagram and pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2
Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3
2.1
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.4
Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1
4
6
2/31
3.1.1
Solution 1: resistor in the ground line (RGND only) . . . . . . . . . . . . . . . . 20
3.1.2
Solution 2: a diode (DGND) in the ground line. . . . . . . . . . . . . . . . . . . . 21
3.2
Load dump protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.3
Microcontroller I/Os protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.4
Maximum demagnetization energy (VCC = 13.5V) . . . . . . . . . . . . . . . . . 23
Package and PC board thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.1
5
GND protection network against reverse battery . . . . . . . . . . . . . . . . . . . 20
PowerSSO-24 thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Package and packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.1
ECOPACK® packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.2
PowerSSO-24™ mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.3
Packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Doc ID 13329 Rev 10
VNQ5050AK-E
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Table 17.
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pin functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Suggested connections for unused and not connected pins . . . . . . . . . . . . . . . . . . . . . . . . 6
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching (VCC=13V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Current sense (8V
很抱歉,暂时无法提供与“VNQ5050AK-E”相匹配的价格&库存,您可以联系我们找货
免费人工找货