VNQ860TR-E

VNQ860-E, VNQ860SP-E Datasheet Quad channel high-side driver Features • VCC(AMR) = 41 V • RDS(on) ≤ 0.270 Ω @TJ = 25 oC (per channel) • Fast demagnetization of inductive loads ,VDEMAG(TYP) = VCC - 52V • • • Very low standby current CMOS compatible I/Os Per channel process side op. current IOUT up to 0.35A • • • • Undervoltage and overvoltage shutdown Short circuit protection on output channels Per-channel thermal shutdown protection and diagnostic Protection against loss of ground Application • • • Industrial PC peripheral input/output Numerical control machines Drivers for all type of loads (resistive, capacitive, inductive) Description Product status link VNQ860-E VNQ860SP-E The VNQ860-E and VNQ860SP-E are monolithic devices realized in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device automatically turns OFF in case of ground pin disconnection. This device is especially suitable for IEC 61131 compliant industrial applications. Product label DS4107 - Rev 9 - October 2021 For further information contact your local STMicroelectronics sales office. www.st.com VNQ860-E, VNQ860SP-E Block diagram 1 Block diagram Figure 1. Block diagram DS4107 - Rev 9 page 2/25 VNQ860-E, VNQ860SP-E Absolute maximum ratings 2 Absolute maximum ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VCC DC supply voltage 41 V -VCC Reverse DC supply voltage -0.3 V -IGND Reverse DC ground pin -200 mA IOUT DC output current Internally limited A -IOUT Reverse DC output current -2 A ± 10 mA IIN DC input current VIN Input voltage range -3/+VCC V VSTAT DC status pin voltage + VCC V VESD Electrostatic discharge (R = 1.5 kΩ; C = 100 pF) 2000 V Ptot Power dissipation at Tc