VW6754
Ultra small reflowable UXGA camera module
Data Brief
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
2 megapixel resolution sensor (1600 x 1200) High quality lens Compact size: 5.0 mm x 5.0 mm x 3.8 mm Lead-free reflowable BGA packaging SMIA 1.0 profile 2 compatible Video data interface - CCP 2.0 maximum 640 MHz Command interface - CCI Analog power supply from 2.4 V to 2.9 V Digital power supply from 1.7 V to 2.9 V On-board 10-bit ADC Integral EMC shielding and EMI reduction techniques Ultra low power standby mode On-chip PLL Smooth frame rate control Defect correction 4 channel anti-vignette
Description
The VW6754 lead free Though Silicon Via BGA reflowable 2 megapixel camera module is designed for use across a range of mobile phone handsets and accessories. It is suitable for high quality still camera function and also supports video modes. The camera silicon device is SMIA 1.0 profile 2 compliant and is capable of streaming raw bayer 2 megapixel images at up to 30 fps. The VW6754 supports the CCI control and CCP 2.0 data interfaces. The camera is attached to the application motherboard using standard reflow process techniques. As different phone platforms have different baseband processors with varying capabilities, a software implementation of the required image processing algorithms on the phone baseband may not be possible. In such cases, a separate hardware accelerator (STV0986) or application engine (STn8815) device can be incorporated in the phone system to run the algorithms in hardware. The specifications of these devices are available in separate documents. The module design is optimized for both footprint and height. The multi-element lens provides excellent image quality at focus distances from 50 cm to infinity. The product is lead free. VW6754 offers ultra low power consumption in standby mode consuming less than 30 µW.
February 2008
Rev 1
1/4
www.st.com
4
For further information contact your local STMicroelectronics sales office.
Overview
VW6754
1
Overview
Figure 1. Application diagram Figure 2. Block diagram
VW6754 2 Mpixel camera module
CLK PDN CCI CCP2.0
STV0984 or STV0986 Processor
CLK PDN I2C CCP2.0 or ITU
Baseband or Application Processor
VW6754
EXTCLK XSHUTDOWN PLL and Clock Management Power Mgmt CCI Receiver Sensor Control Registers Power-On Reset 2 Mpixel Pixel array 1152 x 864 VDIG DGND
Readout
CCI CCP2.0
SMIA Rx’er
CLKP CLKN DATAP DATAN
CCP2.0 Transmitter
VW6754 2 Mpixel camera module
CLK PDN
SCL SDA
Baseband or Application Processor
SMIA profile 0 frame formatter
Y Decoder
VANA AGND
Column ADC X Decoder Line SRAM
Table 1.
Technical specifications
Parameter Descriptions 1600 x 1200 (UXGA) ST IMG175 process 1.75 µm x 1.75 µm + 81 dB + 24 dB (max) 60 dB 37 dB (@ 100 lux) < 10 lux Analog: 2.4 V to 2.9 V
Pixel resolution Sensor technology Pixel size Exposure control Analog gain Dynamic range Signal to noise Minimum illumination(1) Supply voltage
Digital: 1.7 V to 2.9 V Average power consumption 30fps Package size (lxwxh) Lens TV distortion Module relative Package type System attach illumination(2)
很抱歉,暂时无法提供与“VW6754”相匹配的价格&库存,您可以联系我们找货
免费人工找货