X-NUCLEO-OUT02A1

X-NUCLEO-OUT02A1 Data brief Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo Features • Based on the ISO8200AQ whose main characteristics are: – Embedded 4kV galvanic isolation – Radio frequency communication between the logic and process sides for maximum noise immunity – Very low power dissipation (RON(MAX) = 220 mΩ) – – – Fast decay for inductive loads 20 MHz SPI I/F on logic side VCC power good diagnostics – Product summary Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo X-NUCLEOOUT02A1 Industrial input/output expansion board based on VNI8200XP and CLT01-38SQ7 for STM32 Nucleo X-NUCLEOPLC01A1 Galvanic isolated octal high-side smart power solid state-relay ISO8200AQ STM32 Nucleo-64 development board with STM32F401RE/ STM32F334R8 MCU NUCLEOF401RE/ NUCLEOF334R8 • • • • • • • • • • • Overload and overheating protections with thermal shutdown and diagnostics – QFN-32L (9x11x1 mm) package 10.5 to 33 V operating voltage range Green LED (x8) for output on/off status Red LED for process supply power good fault Red LED for overload and overheating Supply reverse polarity protection EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5 Compatible with STM32 Nucleo boards Equipped with Arduino™ UNO R3 connectors CE certified RoHS and China RoHS compliant WEEE compliant Description The X-NUCLEO-OUT02A1 industrial digital output expansion board for STM32 Nucleo is based on the ISO8200AQ galvanic isolated octal high-side smart power solid state-relay. It provides an affordable and easy-to-use solution for the development of 8-channel digital output modules, letting you easily evaluate the ISO8200AQ communication and industrial load driving features. The X-NUCLEO-OUT02A1 can be connected to a NUCLEO-F401RE or NUCLEOF334R8 development board via Arduino™ UNO R3 connectors. You can also evaluate the 16-channel digital output modules by connecting two XNUCLEO-OUT02A1 expansion boards and activating the daisy chaining feature. The X-NUCLEO-OUT02A1 interfaces with the STM32 controller via SPI and GPIO pins and is compatible with the Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. Industrial PLC functionality with 8 inputs and 16 outputs can be added with the XNUCLEO-PLC01A1 expansion board. DB3767 - Rev 2 - November 2018 For further information contact your local STMicroelectronics sales office. www.st.com X-NUCLEO-OUT02A1 Schematic diagrams 1 Schematic diagrams Figure 1. X-NUCLEO-OUT02A1 circuit schematic (1 of 2) PC11 PD2 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 PC9 D15 PB8 D14 PB9 AVDD E5v0 D13 PA5 D12 PA6 D11 PA7 D10 PB6 D9 PC7 D8 PA9 PA8 D6 PB10 D5 PB4 PB5 D4 D3 PB3 D2 PA10 D1 PA2 D0 PA3 IOREF NRST 3v3 5V GND VIND7 PA0 PA1 PA4 PB0 PC1 PC0 A0 A1 A2 A3 A4 A5 ST morpho c onnectors 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 CN10 CON38 ISO_CLK Analog supply 10.5 V - 30 V PC8 PC6 PC5 U5V PD8 PA12 PB11 PB12 PB11 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 Main voltage 2 1 Vcc supply GND_DEC PB2 PB1 PB15/PA7 PB14/PA6 PB13/PA5 D1 C2 2.2µF/50V D2 1 SMC30J36A CN7 1 3 5 7 9 11 13 15 17 19 PB7 21 PC13 23 (PC14) 25 (PC15) 27 (PF0) 29 PF1 31 VBAT/VLCD 33 ALTERNATE USE uC_MISO PC2 35 R101 100R N.M. PC3 37 uC_MOSI CON38 ALTERNATE R102 100R N.M. USE PC10 PC12 VDD BOOT0 PF6 PF7 PA13 PA14 PA15 EARTH C1 4.7nF/3kV N.M. J1 C3 4.7nF/3kV N.M STPS1H100A PC4 PF5PA2 PF4 100R N.M. R103 (7-12 V STM32 Nucleo supply voltage) VIN D3 2 D14 D13 100R D12 100R D11 100R D10 100R 100R N.M.D9 100R N.M.D8 2 R1 R2 R3 R4 R105 R106 CN5 PB8 10 PB9 9 8 7 PA5 6 PA6 5 PA7 4 PB6 3 PC7 2 PA9 1 3 2 1 1 CON3 J2 D15 ISO_CLK uC_MISO uC_MOSI ISO_SS ISO_SDIO1 ISO_SDIO1 100R N.M.D15 D14 100R AVDD ESDA7P60-1U1M DEFAULT DEFAULT DEFAULT DEFAULT ALTERNATE USE ALTERNATE USE R104 R5 1 ALTERNATE USE ISO_SDIO1 DEFAULT ISO_PGOOD IOREF NRST 3V3 5V GND GND VIN 2 3v3 1 2 3 4 5 6 7 8 ESDA15P60-1U1M CN6 1 EXT_VDD ISO8200AQ direct supply voltage: - set to max. 3..3 V when the X-NUCLEO-OUT02A1 is used with an STM32 Nucleo board - can be set to max. 5.5 V when the X-NUCLEO-OUT02A1 is used standalone BAT48JFILM GND_DEC GND_DEC Vcc supply Vcc supply ISO_SS ISO_SS ISO_CLK CN8 PA0 PA1 PA4 PB0 PC1 PC0 1 2 3 4 5 6 A0 A1 A2 A3 A4 A5 R111 R112 R113 R7 R114 R115 100R N.M. 100R N.M. 100R N.M. 100R 100R N.M. 100R N.M. ISO_OUT EN ISO_PGOOD ISO_SS ISO_FAULT ISO_FAULT ISO_OUT EN ALTERNATE USE ALTERNATE USE ALTERNATE USE DEFAULT ALTERNATE USE ALTERNATE USE ALTERNATE USE ALTERNATE USE ALTERNATE USE DEFAULT ALTERNATE USE ALTERNATE USE ISO_SS ISO_FAULT ISO_SDIO1 ISO_OUT EN ISO_CLK ISO_PGOOD R116 R107 R108 R6 R109 R110 100R N.M.D7 100R N.M.D6 100R N.M.D5 D4 100R 100R N.M.D3 100R N.M.D2 D1 D0 PA8 PB10 PB4 PB5 PB3 PA10 PA2 PA3 CN9 8 7 6 5 4 3 2 1 ISO_CLK uC_MOSI uC_MOSI ISO_SDIO1 ISO_SDIO1 uC_MISO uC_MISO ISO_OUT EN ISO_OUT EN ISO_PGOOD ISO_PGOOD ISO_FAULT ISO_FAULT Arduino c onnectors Figure 2. X-NUCLEO-OUT02A1 circuit schematic (2 of 2) GND_DEC 3v3 Vdd GND_DEC Vcc supply C7 2.2µF/50V MLCC 2 2 4 6 Vcc supply D16 CON6A C27 C28 100nF 2.2µF 1 EXT_VDD J8 SMBJ5.0A 1 3 5 29 2 4 6 30 R200R CON6A 31 19 18 OUT1a OUT5a NC#27 OUT6b NC#28 OUT6a NC#29 OUT7b NC#30 OUT7a SDO OUT8b FAULT OUT8a 11 10 J5 9 8 7 R28 R27 R26 R25 R24 R23 R22 R21 10k 10k 10k 10k 10k 10k 10k 10k 6 5 4 R16 910R 1 D12 D11 D10 D9 D8 D7 D6 D5 2 22nF/50V 22nF/50V 22nF/50V GND1 NC#2 22nF/50V ISO_FAULT 22nF/50V 2 22nF/50V ISO_PGOOD 22nF/50V 2 22nF/50V 1 D13RED LED C26 C25 C24 C23 C22 C21 C20 C19 3 R36 910R 2 Vdd GND3 33 GND2 ISO_PGOOD 1 GNDdd 1 32 C8 33pF/6.3V NC#26 12 1 28 OUT5b 1 27 OUT4a PGOOD 2 26 OUT4b SDI 2 33pF/6.3V 25 1 1 3 5 C15 1 2 3 4 5 6 7 8 2 ISO_SDIO1 ISO_SDIO1 J7 C16 CON8 14 13 1 C17 CON6A uC_MISO 24 0R OUT3a 1 R32 SS CLK 16 15 2 2 4 6 OUT3b 2 1 3 5 33pF/6.3V uC_MOSI 33pF/6.3V ISO_SDIO1 ISO_SDIO1 J6 OUT EN 17 1 22 0R OUT2a 1 R29 21 2 0R 2 R30 23 uC_MISO 36 OUT2b ISO_SS ISO_CLK ISO_CLK uC_MOSI OUT1b ISO8200AQ TAB Vcc 10pF ISO_SS U1 GND4 R31 47k Vdd C18 20 ISO_OUT EN 3534 C5 100nF/50V ISO_OUT EN GND_DEC D4RED LED ISO_FAULT DB3767 - Rev 2 page 2/4 X-NUCLEO-OUT02A1 Revision history Table 1. Document revision history DB3767 - Rev 2 Date Version Changes 06-Nov-2018 1 Initial release. 20-Nov-2018 2 Updated cover page description. page 3/4 X-NUCLEO-OUT02A1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DB3767 - Rev 2 page 4/4