CD105T125NP-181KC

SMD Power Inductor CD105/T125 Description • Ferrite durm core construction • Magnetically unshielded • L×W×H: 10.4×9.4×5.8mm Max. • Product weight:1.3 g(Ref.) • Moisture Sensitivity Level: 1 • Qualification to AEC-Q200 Environmental Data • Operating Temperature: -40˚C to +125˚C (including self-heating) • Storage temperature range: -40℃～+125℃ Packaging • Carrier tape and reel packaging Applications • High temp and high reliability automotive applications Dimension - [mm] Recommended Land pattern - [mm] Wire Connection Note： This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 1 of 6 Ver. 2021-03-05 WWW.SUMIDA.COM SMD Power Inductor CD105/T125 Electrical Characteristics Part Number Inductance [Within] (μH) ※1 CD105T125NP-100MC 10.00 ± 20% CD105T125NP-120MC 12.00 ± 20% CD105T125NP-150MC 15.00 ± 20% CD105T125NP-180MC 18.00 ± 20% CD105T125NP-220MC 22.00 ± 20% CD105T125NP-270MC 27.00 ± 20% CD105T125NP-330MC 33.00 ± 20% CD105T125NP-390MC 39.00 ± 20% CD105T125NP-470KC 47.00 ± 10% CD105T125NP-560KC 56.00 ± 10% CD105T125NP-680KC 68.00 ± 10% CD105T125NP-820KC 82.00 ± 10% CD105T125NP-101KC 100 ± 10% CD105T125NP-121KC 120 ± 10% CD105T125NP-151KC 150 ± 10% CD105T125NP-181KC 180 ± 10% CD105T125NP-221KC 220 ± 10% CD105T125NP-271KC 270 ± 10% CD105T125NP-331KC 330 ± 10% CD105T125NP-391KC 390 ± 10% CD105T125NP-471KC 470 ± 10% CD105T125NP-561KC 560 ± 10% CD105T125NP-681KC 680 ± 10% CD105T125NP-821KC 820 ± 10% Temperature D.C.R. at 20℃ Saturation Current Rise Current Max.(Typ.) (mΩ) (A) Max.(Typ.) ※2 (A) Max.(Typ.) ※3 60.00 (30.00) 70.00 (37.00) 80.00 (43.00) 90.00 (46.00) 100 (57.00) 110 (71.00) 120 (83.00) 140 (91.00) 170 (112) 190 (127) 220 (152) 250 (176) 350 (242) 400 (274) 470 (294) 630 (430) 730 (500) 970 (670) 1150 (780) 1300 (880) 1480 (1000) 1900 (1280) 2250 (1480) 2550 (1690) 3.20 (4.00) 2.83 (3.54) 2.54 (3.17) 2.40 (3.00) 2.13 (2.66) 1.96 (2.45) 1.76 (2.20) 1.62 (2.02) 1.54 (1.92) 1.45 (1.81) 1.32 (1.65) 1.20 (1.50) 1.05 (1.31) 0.98 (1.22) 0.88 (1.10) 0.79 (0.99) 0.71 (0.89) 0.65 (0.81) 0.58 (0.72) 0.50 (0.63) 0.48 (0.60) 0.45 (0.56) 0.42 (0.52) 0.38 (0.48) 3.47 (4.00) 3.37 (3.93) 3.10 (3.57) 3.00 (3.50) 2.90 (3.30) 2.50 (2.84) 2.25 (2.58) 2.24 (2.55) 1.99 (2.25) 1.80 (2.06) 1.55 (1.80) 1.54 (1.76) 1.23 (1.42) 1.20 (1.40) 1.05 (1.20) 0.98 (1.12) 0.87 (1.01) 0.72 (0.83) 0.67 (0.76) 0.56 (0.65) 0.53 (0.61) 0.52 (0.59) 0.48 (0.56) 0.47 (0.54) Note： This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 2 of 6 Ver. 2021-03-05 WWW.SUMIDA.COM SMD Power Inductor CD105/T125 ※1 Measuring frequency 10μH ~ 82μH at 2.52 MHz; 100μH ～820μH at 1 kHz ※2 Saturation current: This indicates the actual value of D.C. current when the inductance becomes 10% lower than its initial value.(Ta＝20℃) ※3 Temperature rise current: The actual value of D.C. current when the temperature of coil becomes △T=40℃ (Ta＝20℃). Solder Reflow Condition Note： This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 3 of 6 Ver. 2021-03-05 WWW.SUMIDA.COM SMD Power Inductor CD105/T125 Saturation Current & Temperature Rise Graph 1. CD105T125NP-100MC L (μH) 2. CD105T125NP-120MC △T(℃) L (μH) DC(A) L (μH) DC(A) △T(℃) L (μH) L (μH) △T(℃) DC(A) 8. CD105T125NP-390MC △T(℃) △T(℃) 6. CD105T125NP-270MC DC(A) 7. CD105T125NP-330MC DC(A) L (μH) DC(A) 5. CD105T125NP-220MC △T(℃) L (μH) △T(℃) DC(A) 4. CD105T125NP-180MC L (μH) 3. CD105T125NP-150MC 9. CD105T125NP-470KC △T(℃) DC(A) L (μH) △T(℃) DC(A) Note： This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 4 of 6 Ver. 2021-03-05 WWW.SUMIDA.COM SMD Power Inductor CD105/T125 10. CD105T125NP-560KC L (μH) 11. CD105T125NP-680KC △T(℃) L (μH) DC(A) L (μH) DC(A) △T(℃) L (μH) L (μH) △T(℃) DC(A) 17. CD105T125NP-221KC △T(℃) △T(℃) 15. CD105T125NP-151KC DC(A) 16. CD105T125NP-181KC DC(A) L (μH) DC(A) 14. CD105T125NP-121KC △T(℃) L (μH) △T(℃) DC(A) 13. CD105T125NP-101KC L (μH) 12. CD105T125NP-820KC 18. CD105T125NP-271KC △T(℃) DC(A) L (μH) △T(℃) DC(A) Note： This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 5 of 6 Ver. 2021-03-05 WWW.SUMIDA.COM SMD Power Inductor CD105/T125 19. CD105T125NP-331KC L (μH) 20. CD105T125NP-391KC △T(℃) L (μH) DC(A) L (μH) L (μH) △T(℃) DC(A) 23. CD105T125NP-681KC △T(℃) DC(A) △T(℃) DC(A) 22. CD105T125NP-561KC L (μH) 21. CD105T125NP-471KC 24. CD105T125NP-821KC △T(℃) DC(A) L (μH) △T(℃) DC(A) For sales office information, please click here to visit our website. Note： This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 6 of 6 Ver. 2021-03-05 WWW.SUMIDA.COM