CLP82

DC COMMON MODE CHOKE COIL Type: CLP82 ◆ Product Description ・9.0×9.7mm Max.(L×W), 2.5mm Max. Height . ◆ Feature ・One common mode choke or pulse transformer is stored in it. ・Ideally used in PCMCIA card. ・RoHS Compliance ◆ Dimensions (mm) MAX.2.5 0.5 9 .4 ±0. 3 6 .5 MA X.9. 0 0.25 1.27 2.54 ＊ Pin pitch shall be measured at the root of terminal. ＊ Dimension does not include solder used on coil. ◆ Land Pattern (mm) 10.2 5.5 1.0 1.0 1.0 1.0 1.0 ◆ Schematics (Bottom) ⑥ 1.27 1.27 1.27 1.27 1.27 ⑦ ⑧ ⑨ ⑤ ④ ③ ⑩ ② ① Mark “・” is Polarity ⑪ ⑫ 1.0 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 DC COMMON MODE CHOKE COIL Type: CLP82 ◆ Specification Between (1-3), (4-6), (7-9), (10-12) １.Sine Wave Inductance ２. Interwinding Capacity ３.Leakage Inductance 4.D.C.R. ５.Ｈi-Pot ※LEAKAGE INDUCTANCE MEASURING (10-12) to be short connected when the leakage inductance(1-3) is measured. (7-9) to be short connected when the leakage inductance(4-6) is measured. (4-6) to be short connected when the leakage inductance(7-9) is measured. (1-3) to be short connected when the leakage inductance(10-12) is measured. 400µH(REF.) MAX.10.0pF MAX.2.5µH MAX.0.7Ω AC 1500Vrms for 1 minute Measuring Conditions 100kHz, 20mVrms 100kHz, 20mVrms 100kHz, 20mVrms at 20℃ 50Hz or 60Hz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2