CP4LBMNP-101M

IFT Coils < SMD Type: CP Series> Type: CP-4LBM ◆ Product Description ・6.0×5.1mm Max.,(L×W), 2.3mm Max. Height. ・Inductance range:10～560µH Max. ・Operating Frequency:15MHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements ◆ Feature ・Low profile fixed shielded type of tight-space design ・Ideally used as IFT coils or low power DC-DC converters transformers. ・RoHS Compliance ◆ Dimensions (mm) 1.5±0.2 1.2±0.15 0.4±0.2 ＋0.3 4.8－0.2 0.45 ＋0.3 4.8－0.2 0.45 2.3 Max. 1.5±0.2 0.95 3.8 0.95 ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ＊ Dimension without tolerance are approx. ◆ Connection (Bottom View) 3 2 S 1 6 4 “S” is winding start Please refer to the sales offices on our website for a representative near you www.sumida.com 3.4±0.3 1/2 IFT Coils < SMD Type: CP Series> Type: CP-4LBM ◆ Specification NO. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 Part No. CP4LBMNP-1ØØM CP4LBMNP-12ØM CP4LBMNP-15ØM CP4LBMNP-18ØM CP4LBMNP-22ØM CP4LBMNP-27ØM CP4LBMNP-33ØM CP4LBMNP-39ØM CP4LBMNP-47ØM CP4LBMNP-56ØM CP4LBMNP-68ØM CP4LBMNP-82ØM CP4LBMNP-1Ø1M CP4LBMNP-121M CP4LBMNP-151M CP4LBMNP-181M CP4LBMNP-221M CP4LBMNP-271M CP4LBMNP-331M CP4LBMNP-391M CP4LBMNP-471M CP4LBMNP-561M Stamp 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 Inductance (at 1kHz) 10μH ± 20 % 12μH ± 20 % 15μH ± 20 % 18μH ± 20 % 22μH ± 20 % 27μH ± 20 % 33μH ± 20 % 39μH ± 20 % 47μH ± 20 % 56μH ± 20 % 68μH ± 20 % 82μH ± 20 % 100μH ± 20 % 120μH ± 20 % 150μH ± 20 % 180μH ± 20 % 220μH ± 20 % 270μH ± 20 % 330μH ± 20 % 390μH ± 20 % 470μH ± 20 % 560μH ± 20 % Rated Current (mA) ※ 360 335 305 280 275 255 245 225 220 210 185 165 130 120 115 110 100 95 85 75 70 60 D.C.R. (Ω) (at 2℃) 0.90 1.00 1.10 1.30 1.50 1.60 1.80 2.00 2.20 2.50 3.00 3.60 6.40 7.70 8.70 9.50 10.50 12.20 14.00 16.10 19.60 22.00 ※ Rated current: The DC current at which the inductance decreases by 90% of its initial value or or when △t=40℃, whichever is lower(Ta=20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2