CP55-T308-NP

IFT COILS < SMD Type: CP Series> Type: CP55 ◆ Product Description ・6.2×5.9mm Max.(L×W), 5.5mm Max. Height. ・Inductance range:1mH , Max. reference unloaded Q:50 ・Operating frequency:15MHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Low profile variable type of tight-space design. ・Internally assembled chip condenser is available. ・Ideally used in automotive tuner units of high reliabilities. ・RoHS Compliance ◆ Dimensions (mm) ◆ Connection (Bottom) 6.2 4 0.7 2.8 5.6±0.3 3.5 3.5±0.2 0.7 2.8 +0.1 0.5-0.05 3 0.9 5.6±0.3 5.5 MAX. 2 S 1 6 “S” is winding start ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ＊ Dimension without tolerance are approx. ◆ Specification Wire Inductance Unloaded Q (UEW) ［Variable］ [MIN.] 06 0.10 4.7μH±3％ 45 CP55-T3Ø7-NP 07 0.10 6.8μH±3％ 40 CP55-T3Ø8-NP 08 0.07 10μH±3％ 45 NO. Part N0. Stamp 01 CP55-T3Ø6-NP 02 03 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1