CPFC74NP-CB10M4

CPFC74 ◆ Features ・ Standard product for CAN bus ・ RoHS cpmpliance ◆ Application ・ CAN BUS, AV/OA equipment. ◆ Dimension & Circuit (mm) ◆ Land Patterns(mm) ◆ Schematics (Bottom) ② ③ ① ④ ② ③ ① ④ or MARK OF POLARITY MARK OF POLARITY ◆ Specifications For CAN bus Part Name Impedance (Ω) (10-100MHz) Insulation Resistance (MΩ)(Coil-Coil) (DC80v, 1min.) Withstanding Voltage (Coil-Coil) (5sec.) D.C.R. () (1-4) (2-3 Rated Current CPFC74NPMax. 300 mΩ Min.1000. Min.100 MΩ. DC 200V Max.0.5A CB1ØM4 CPFC74NPMax. 250 mΩ Min.800. Min.100. MΩ DC 200V Max.0.5A CBØ8M6 ※D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Ver. 1.0 (August 20. 2018) www.sumida.com Page 1 of 2 CPFC74 For Power Supply Part Name Impedance (Ω) (L1, L2 parallel) Withstanding Voltage (Coil-Coil) (5sec.) D.C.R. (mΩ ) (1-2) at 20℃ (3-4)Short Rated Current CPFC74NPMin.700Ω. Max.120 mΩ D.C.125V 1.5A PS1ØH2A15 (100 MHz) CPFC74NPMin.200Ω Max.120 mΩ D.C.125V 2.0A PSØ2H2A2Ø (20-300MHz) CPFC74NPMin.300Ω. Max.120 mΩ D.C.125V 2.5A PSØ3H2A25 (160 MHz) CPFC74NPMin.100Ω Max.60 mΩ D.C.125V 3.0A PSØ1H2A3Ø (100-300MHz) ※1: Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). ※2: D.C.R is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. ◆ Impedance Characteristics Ver. 1.0 (August 20. 2018) www.sumida.com Page 2 of 2