CPFC85

EMC Common Mode Choke& xDSL CO Transformer Type: CPFC85 ◆ Product Description ・9.3×8.2mm Max.(L×W), 5.5mm Max. Height . ◆ Feature ・Ideally used as EMC common mode choke and xDSL CO transformer. ・RoHS Compliance. ◆ Dimensions (mm) 9.1±0.2 5.5 MAX. 1.8 0.5 9.1±0.2 7.2±0.1 8.0±0.2 0.05±0.05 3.4±0.2 0.9 ◆ Land Pattern (mm) 1.5 6.5 3.0 1.5 ◆ Schematics (Bottom) ② ③ ② 6.9±0.3 ③ 2.5 2.8 2.0 ① ④ ① ④ 2.5 MARK OF POLARITY For partname: CPFC85NP-100M03 CPFC85NP-100M10 SILK SCREEN Mark of polarity For partname: CPFC85-1M15NP ◆ Specification (For xDSL CO Transformer Use) Core Part Name CPFC85NP-100M03 CPFC85NP-100M10 Material Ni-Zn Ni-Zn Stamp 0M03 0M10 Impedance (KΩ) (1-4),(2-3) 0.3(@100MHz) 1.0(@100MHz) D.C.R. (mΩ) (1-4),(2-3) 20 25 Rated current (1-2)(A) ※1 (3-4) shorted 5.0 3.0 ※ 1.Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). Specification (For EMC Common Mode Choke Use) Part Name Core Material Stamp Inductance (1-4),(2-3) @ 100kHz 4.7mH±30% Within Common mode attenuation(1-4,2-3) 30dB(Typ.)@100kHz 43dB(Typ.)@1MHz 34dB(Typ.)@10MHz D.C.R. (1-2) ※2 2.0ΩMax. at 20℃ (3-4)shorted Isolation voltage (3-4), 1 minute CPFC85-1M15NP Mn-Zn 1M15 500Vrms AC ※2. D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1