AUG13A-A

Part Number: AUG13A-A www.SunLED.com 12.7mm (0.5") 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Features ● 0 .5 INCH CHARACTER HEIGHT. ● L OW CURRENT OPERATION. R. CH ● H IGH CONTRAST AND LIGHT OUTPUT. EN ● M ECHANICALLY RUGGED. ● E ASY MOUNTING ON P.C. BOARDS OR SOCKETS. 數位簽署者：R. CHEN DN：cn=R. CHEN, o=SPEC 專用, ou=SPEC 專用, email=fangdh@c n.kingbright.com, c= 日期︰2008.03.15 11:46:34 +08'00' ● S TANDARD: GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] VR IF iFS PT TA Tstg UG (GaP) 5 25 140 62.5 -40 ~ +85 -40 ~ +85 Unit V mA mA mW °C Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=10mA) Forward Voltage (Max.) (IF=10mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=10mA) Wavelength of Dominant Emission (Typ.) (IF=10mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR UG (GaP) 2.0 2.5 10 Unit V V uA λP 565 nm λD 568 nm 260°C For 3~5 Seconds Δλ 30 nm C 15 pF Part Number Emitting Color Emitting Material Luminous Intensity (IF=10mA) ucd min. typ. 4690 Wavelength nm λP Description AUG13A-A Green GaP 1200 565 V4 Common Anode, Rt. Hand Decimal Checked : Shin Chi P.1/4 Published Date : MAR 13,2008 Drawing No : SDSA2330 Part Number: AUG13A-A www.SunLED.com 12.7mm (0.5") 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY UG Published Date : MAR 13,2008 Drawing No : SDSA2330 V4 Checked : Shin Chi P.2/4 Part Number: AUG13A-A www.SunLED.com 12.7mm (0.5") 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 13,2008 Drawing No : SDSA2330 V4 Checked : Shin Chi P.3/4 Part Number: AUG13A-A www.SunLED.com 12.7mm (0.5") 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS AUG13A-A Published Date : MAR 13,2008 Drawing No : SDSA2330 V4 Checked : Shin Chi P.4/4