EUR21D

Part Number: www.SunLED.com EUR21D 3.65x6.15mm SINGLE CHIP LED LIGHT BAR Features ●FLAT RECTANGULAR LIGHT EMITTING SURFACE. ●SINGLE COLOR. ●IDEAL AS FLUSH MOUNTED PANEL INDICATORS. ●EXCELLENT ON/OFF CONTRAST. ●LONG LIFE - SOLID STATE RELIABILITY. ●THIS SERIES ARE TIN-DIPPED. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg UR (GaAsP/GaP) 5 30 160 75 -40 ~ +85 -40 ~ +85 Unit V mA mA mW °C Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=10mA) Forward Voltage (Max.) (IF=10mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=10mA) Wavelength of Dominant Emission (Typ.) (IF=10mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Capacitance (VF=0V, f=1MHz) VF VF IR UR (GaAsP/GaP) 1.9 2.5 10 Unit V V uA λP 627 nm 260°C For 3 Seconds 260°C For 5 Seconds λD 625 nm Δλ 45 nm C 15 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=10mA) mcd min. typ. 9 Wavelength nm λP Viewing Angle 2 θ 1/2 EUR21D Red GaAsP/GaP Red Diffused 1.8 627 100° Published Date : MAR 21, 2008 Drawing No : SDSA3724 V3 Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com EUR21D 3.65x6.15mm SINGLE CHIP LED LIGHT BAR R. CHE N 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.22 14:23:03 +08'00' UR Published Date : MAR 21, 2008 Drawing No : SDSA3724 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com EUR21D 3.65x6.15mm SINGLE CHIP LED LIGHT BAR Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 21, 2008 Drawing No : SDSA3724 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com EUR21D 3.65x6.15mm SINGLE CHIP LED LIGHT BAR PACKING & LABEL SPECIFICATIONS EUR21D Published Date : MAR 21, 2008 Drawing No : SDSA3724 V3 Checked : B.L.LIU P.4/4