GURUGX10D

Part Number: www.SunLED.com GURUGX10D 10 SEGMENTS BAR GRAPH ARRAY Features S UITABLE FOR LEVEL INDICATORS. L OW CURRENT OPERATION. E XCELLENT ON/OFF CONTRAST. W IDE VIEWING ANGLE. END STACKABLE. MECHANICALLY RUGGED. STANDARD : GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. UR (GaAsP/ GaP) 1.9 2.5 10 Operating Characteristics (TA=25°C) Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] VR IF iFS PT TA Tstg UR (GaAsP/ GaP) 5 30 160 75 UG (GaP) 5 25 140 62.5 UG (GaP) 2.0 2.5 10 Unit Unit V mA mA mW °C yalin email=sjhou@cn. Forward Voltage (Typ.) kingbright.com, c= 日期︰2008.03.11 (IF=10mA)13:52:01 +08'00' 數位簽署者：yalin DN：cn=yalin, o, ou, VF VF IR V V uA Forward Voltage (Max.) (IF=10mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=10mA) Wavelength Of Dominant Emission (Typ.) (IF=10mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Capacitance (Typ.) (VF=0V, f=1MHz) Luminous Intensity (IF=10mA) ucd min. typ. 8990 9490 V4 627 565 λP 627 565 nm -40 ~ +85 -40 ~ +85 260°C For 3~5 Seconds λD 625 568 nm Δλ 45 30 nm C 15 15 pF Part Number Emitting Color Emitting Material Wavelength nm λP Description GURUGX10D Red Green GaAsP/GaP GaP 1900 1900 10 Segments Bargraph-Display Published Date : MAR 11,2008 Drawing No : SDSA3715 Checked : Shin Chi P.1/5 Part Number: www.SunLED.com GURUGX10D 10 SEGMENTS BAR GRAPH ARRAY UR Published Date : MAR 11,2008 Drawing No : SDSA3715 V4 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com GURUGX10D 10 SEGMENTS BAR GRAPH ARRAY UG Published Date : MAR 11,2008 Drawing No : SDSA3715 V4 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com GURUGX10D 10 SEGMENTS BAR GRAPH ARRAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 11,2008 Drawing No : SDSA3715 V4 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com GURUGX10D 10 SEGMENTS BAR GRAPH ARRAY PACKING & LABEL SPECIFICATIONS GURUGX10D Published Date : MAR 11,2008 Drawing No : SDSA3715 V4 Checked : Shin Chi P.5/5