LM2BB11W

Part Number: www.SunLED.com LM2BB11W T-1 (3mm) SOLID STATE LAMP PRELIMINARY SPEC Features LOW POWER CONSUMPTION. POPULAR T-1 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. ●RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg M2BB (InGaN) 5 30 100 111 -40 ~ +85 -40 ~ +85 1000 260°C For 3 Seconds 260°C For 5 Seconds Operating Characteristics (TA=25°C) Unit V mA mA mW °C V Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) Luminous Intensity (IF=20mA) mcd min. LM2BB11W Blue InGaN Water Clear 1500 typ. 2990 458 20° VF VF IR M2BB (InGaN) 3.2 3.7 10 Unit V V uA λP 458 nm λD 465 nm Electrostatic Discharge Threshold (HBM) Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] Δλ 22 nm C 110 pF Part Number Emitting Color Emitting Material Lens-color Wavelength nm λP Viewing Angle 2 θ 1/2 Published Date : MAR 25, 2008 Drawing No : SDSA6559 V1 Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com LM2BB11W T-1 (3mm) SOLID STATE LAMP M2BB Published Date : MAR 25, 2008 Drawing No : SDSA6559 V1 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com LM2BB11W T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 25, 2008 Drawing No : SDSA6559 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com LM2BB11W T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS LM2BB11W R.CHEN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.27 09:53:46 +08'00' Published Date : MAR 25, 2008 Drawing No : SDSA6559 V1 Checked : B.L.LIU P.4/4