LM2BG01W

Part Number: LM2BG01W www.SunLED.com 10mm SOLID STATE LAMP PRELIMINARY SPEC Features ●10mm DIAMETER BIG LAMP. ●I.C. COMPATIBLE. ●RELIABLE AND RUGGED. ●LONG LIFE - SOLID STATE RELIABILITY. ●RoHS COMPLIANT. R.CHEN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專 用, ou=SPEC專用, email=fangdh@cn.kingbright. com, c= 日期︰2008.03.24 11:33:49 +08'00' ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg M2BG (InGaN) 5 30 100 111 -40 ~ +85 -40 ~ +85 1000 260°C For 3 Seconds 260°C For 5 Seconds Unit V mA mA mW °C V Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR M2BG (InGaN) 3.2 3.7 10 Unit V V uA λP 525 nm Electrostatic Discharge Threshold (HBM) Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] λD 535 nm Δλ 39 nm C 65 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 17990 Wavelength nm λP Viewing Angle 2 θ 1/2 LM2BG01W Green InGaN Water Clear 8000 525 15° Published Date : MAR 22,2008 Drawing No : SDSA6546 V1 Checked : B.L.LIU P.1/4 Part Number: LM2BG01W www.SunLED.com 10mm SOLID STATE LAMP M2BG Published Date : MAR 22,2008 Drawing No : SDSA6546 V1 Checked : B.L.LIU P.2/4 Part Number: LM2BG01W www.SunLED.com 10mm SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 22,2008 Drawing No : SDSA6546 V1 Checked : B.L.LIU P.3/4 Part Number: LM2BG01W www.SunLED.com 10mm SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS LM2BG01W Published Date : MAR 22,2008 Drawing No : SDSA6546 V1 Checked : B.L.LIU P.4/4