LMDKVG34M

Part Number: www.SunLED.com LMDKVG34M T -1(3mm) BI-COLOR INDICATOR LAMP PRELIMINARY SPEC Features U NIFORM LIGHT OUTPUT. L OW POWER CONSUMPTION. 3 L EADS WITH ONE COMMON LEAD. I.C. COMPATIBLE. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (peak) 1/10Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg MDK (InGaA lP) 5 30 185 75 VG (InGa AlP) 5 30 150 75 Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (VF=0V, f=1MHz) VF VF IR MDK (InGaA lP) 1.95 2.5 10 Unit V mA mA mW °C VG Unit (InGaAlP) 2.1 2.5 10 V V uA -40 ~ +85 -40 ~ +85 260°C For 3 Seconds 260°C For 5 Seconds λP 650 574 nm λD 635 570 nm Δλ 28 20 nm C 35 15 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 795 108 Wavelength nm λP Viewing Angle 2 θ 1/2 LMDKVG34M Red Green InGaAlP InGaAlP White Diffused 110 18 650 574 60° Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.1/5 Part Number: www.SunLED.com LMDKVG34M T -1(3mm) BI-COLOR INDICATOR LAMP MDK Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.2/5 Part Number: www.SunLED.com LMDKVG34M T -1(3mm) BI-COLOR INDICATOR LAMP VG Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.3/5 Part Number: www.SunLED.com LMDKVG34M T -1(3mm) BI-COLOR INDICATOR LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.4/5 Part Number: www.SunLED.com LMDKVG34M T -1(3mm) BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS LMDKVG34M R. CH EN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC 專用, ou=SPEC專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.21 13:39:30 +08'00' Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.5/5