LMG04D

Part Number: LMG04D www.SunLED.com 1.5mm SIDE LOOK LED Features LOW POWER CONSUMPTION. SIDE LOOKING PACKAGE. RELIABLE AND RUGGED. EXCELLENT UNIFORMITY OF LIGHT OUTPUT. LONG LIFE SOLID STATE RELIABILITY. ●RoHS COMPLIANT. Notes: Operating Characteristics (TA=25°C) R. N 數位簽署者：R. CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.22 09:42:52 +08'00' MG (GaP) VF VF IR 2.2 2.5 10 Unit V V uA CHE 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg MG (GaP) 5 25 140 62.5 -40 ~ +85 -40 ~ +85 Unit V mA mA mW °C λP 565 nm λD 568 nm Δλ 30 nm C 15 pF 260°C For 3 Seconds 260°C For 5 Seconds Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 14 Wavelength nm λP Viewing Angle 2 θ 1/2 LMG04D Green GaP Green Diffused Drawing No : SDSA3004 7 V3 565 Checked : B.L.LIU 90° P.1/4 Published Date : MAR 21,2008 Part Number: LMG04D www.SunLED.com 1.5mm SIDE LOOK LED MG Published Date : MAR 21,2008 Drawing No : SDSA3004 V3 Checked : B.L.LIU P.2/4 Part Number: LMG04D www.SunLED.com 1.5mm SIDE LOOK LED Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 21,2008 Drawing No : SDSA3004 V3 Checked : B.L.LIU P.3/4 Part Number: LMG04D www.SunLED.com 1.5mm SIDE LOOK LED PACKING & LABEL SPECIFICATIONS LMG04D Published Date : MAR 21,2008 Drawing No : SDSA3004 V3 Checked : B.L.LIU P.4/4