LMO12D

Part Number: LMO12D www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP Features L OW POWER CONSUMPTION. P OPULAR T-1 3/4 DIAMETER PACKAGE. G ENERAL PURPOSE LEADS. R ELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg MO (InGaAlP) 5 30 195 75 -40 ~ +85 -40 ~ +85 Unit V mA mA mW °C Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR MO (InGaAlP) 2.0 2.5 10 Unit V V uA λP 610 nm 260°C For 3 Seconds 260°C For 5 Seconds λD 601 nm Δλ 29 nm C 30 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 795 Wavelength nm λP Viewing Angle 2 θ 1/2 LMO12D Orange InGaAlP Orange Diffused 380 610 30° Published Date : MAR 26, 2008 Drawing No : SDSA3587 V4 Checked : B.L.LIU P.1/4 Part Number: LMO12D www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP MO Published Date : MAR 26, 2008 Drawing No : SDSA3587 V4 Checked : B.L.LIU P.2/4 Part Number: LMO12D www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 26, 2008 Drawing No : SDSA3587 V4 Checked : B.L.LIU P.3/4 Part Number: LMO12D www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS LMO12D R. CHE N 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.27 15:38:08 +08'00' Published Date : MAR 26, 2008 Drawing No : SDSA3587 V4 Checked : B.L.LIU P.4/4