LMR12D5V

Part Number: LMR12D5V www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP Features LOW POWER CONSUMPTION. POPULAR T-1 3/4 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. 5V INTERNAL RESISTOR. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) Reverse Voltage Forward Voltage Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base VR VF PT TA Tstg MR (GaAlAs) 5 6 85 -40 ~ +70 -40 ~ +85 Unit V V mW °C Operating Characteristics (TA=25°C) Forward Current (Typ.) (VF=5V) Forward Current (Max.) (VF=5V) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (VF=5V) Spectral Line Full Width At Half-Maximum (Typ.) (VF=5V) Spectral Line Half-Width (VF=5V) (Typ.) IF IF IR MR (GaAlAs) 13 17.5 10 Unit mA mA uA 260°C For 3 Seconds 260°C For 5 Seconds λP 660 nm λD 640 nm Δλ 20 nm Part Number Emitting Color Emitting Material Lens-color Luminous Intensity ( V =5V ) mcd min. typ. 178 Wavelength nm λP Viewing Angle 2 θ 1/2 LMR12D5V Red GaAlAs Red Diffused 110 660 30° Published Date : MAR 17, 2008 Drawing No : SDSA4847 V3 Checked : B.L.LIU P.1/4 Part Number: LMR12D5V www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP MR Published Date : MAR 17, 2008 Drawing No : SDSA4847 V3 Checked : B.L.LIU P.2/4 Part Number: LMR12D5V www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% Note: Accuracy may depend on the sorting parameters. yalin 數位簽署者：yalin DN：cn=yalin, o, ou, email=sjhou@cn. kingbright.com, c= 日期︰2008.03.24 07:38:35 +08'00' Published Date : MAR 17, 2008 Drawing No : SDSA4847 V3 Checked : B.L.LIU P.3/4 Part Number: LMR12D5V www.SunLED.com T -1 3/4 (5mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS LMR12D5V Published Date : MAR 17, 2008 Drawing No : SDSA4847 V3 Checked : B.L.LIU P.4/4