LMRMG81MCC

Part Number: LMRMG81MCC www.SunLED.com 8mm BI-COLOR INDICATOR LAMP Features UNIFORM LIGHT OUTPUT. LOW POWER CONSUMPTION. MILKY WHITE DIFFUSION LENS. 3 LEADS WITH ONE COMMON LEAD. I.C. COMPATIBLE. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. R.CHEN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn.kingbright.com, c= 日期︰2008.03.21 13:56:46 +08'00' Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg MR MG (GaAlAs) (GaP) 5 30 155 75 5 25 140 62.5 Unit V mA mA mW Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR MR (GaAlAs) 1.85 2.5 10 MG (GaP) 2.2 2.5 10 Unit V V uA λP 660 565 nm -40 ~ +85 -40 ~ +85 260°C For 3 Seconds 260°C For 5 Seconds °C λD 640 568 nm Δλ 20 30 nm C 45 15 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 198 49 Wavelength nm λP Viewing Angle 2 θ 1/2 LMRMG81MCC Red Green GaAlAs GaP White Diffused 110 18 660 565 50° Published Date : MAR 19,2008 Drawing No :SDSA6533 V1 Checked : B.L.LIU P.1/5 Part Number: LMRMG81MCC www.SunLED.com 8mm BI-COLOR INDICATOR LAMP MR Published Date : MAR 19,2008 Drawing No :SDSA6533 V1 Checked : B.L.LIU P.2/5 Part Number: LMRMG81MCC www.SunLED.com 8mm BI-COLOR INDICATOR LAMP MG Published Date : MAR 19,2008 Drawing No :SDSA6533 V1 Checked : B.L.LIU P.3/5 Part Number: LMRMG81MCC www.SunLED.com 8mm BI-COLOR INDICATOR LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 19,2008 Drawing No :SDSA6533 V1 Checked : B.L.LIU P.4/5 Part Number: LMRMG81MCC www.SunLED.com 8mm BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS LMRMG81MCC Published Date : MAR 19,2008 Drawing No :SDSA6533 V1 Checked : B.L.LIU P.5/5