LNWA11W

www.SunLED.com Part Number: LNWA11W T-1 (3mm) SOLID STATE LAMP PRELIMINARY SPEC Features ●LOW POWER CONSUMPTION. ●POPULAR T-1 DIAMETER PACKAGE. ●GENERAL PURPOSE LEADS. ●RELIABLE AND RUGGED. ●LONG LIFE - SOLID STATE RELIABILITY. ●AVAILABLE ON TAPE AND REEL. ●RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg NWA (InGaN) 5 30 100 120 -40 ~ +85 -40 ~ +85 1000 Unit V mA mA mW °C X 0.31 Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) VF NWA (InGaN) 3.2 Unit V VF 4.0 V IR 10 uA Electrostatic Discharge Threshold (HBM) Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] v Chromaticity Coordinates (Typ.) Y Capacitance (Typ.) (VF=0V, f=1MHz) 0.31 260°C For 3 Seconds 260°C For 5 Seconds C 100 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 1195 Viewing Angle 2 θ 1/2 LNWA11W White InGaN Water Clear 280 34° Published Date : MAR 26, 2008 Drawing No : SDSA5133 V4 Checked : B.L.LIU P.1/5 www.SunLED.com Part Number: LNWA11W T-1 (3mm) SOLID STATE LAMP NWA R.CHEN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.27 11:24:17 +08'00' Published Date : MAR 26, 2008 Drawing No : SDSA5133 V4 Checked : B.L.LIU P.2/5 www.SunLED.com Part Number: LNWA11W T-1 (3mm) SOLID STATE LAMP LNWA11W White CIE 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 c1 b4 c0 b3 b1 b2 a1 a0 a0 X Y 0.264 0.267 0.283 0.305 b2 X Y 0.287 0.295 0.330 0.339 c0 X Y 0.330 0.360 0.361 0.385 0.356 0.330 0.351 0.318 X Y 0.321 0.379 0.330 0.296 0.318 0.276 X Y 0.275 0.321 0.296 0.280 0.276 0.248 X Y 0.248 0.286 a1 0.275 0.321 b3 0.298 0.350 c1 0.366 0.419 0.361 0.385 0.330 0.360 0.306 0.332 0.283 0.305 X Y 0.298 0.350 0.283 0.305 0.264 0.267 X Y 0.283 0.305 b1 0.330 0.360 b4 0.321 0.379 0.330 0.360 0.306 0.332 0.330 0.339 0.287 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k Reference CCT: 9000~5600k Reference CCT: 9000~7000k Reference CCT: 7600~5600k Reference CCT: 5600~4600k Reference CCT: 6000~4600k Published Date : MAR 26, 2008 Drawing No : SDSA5133 V4 Checked : B.L.LIU P.3/5 www.SunLED.com Part Number: LNWA11W T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or chromaticity), the typical accuracy of the sorting process is as follows: 1. Measurement tolerance of the chromaticity coordinates is ±0.02. 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 26, 2008 Drawing No : SDSA5133 V4 Checked : B.L.LIU P.4/5 www.SunLED.com Part Number: LNWA11W T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS LNWA11W Published Date : MAR 26, 2008 Drawing No : SDSA5133 V4 Checked : B.L.LIU P.5/5