LUGR59M

Part Number : LUGR59M www.SunLED.com T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Features UNIFORM LIGHT OUTPUT. LOW POWER CONSUMPTION. R. CHEN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC 專用, ou=SPEC專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.20 14:52:47 +08'00' 3 LEADS WITH ONE COMMON LEAD. I.C. COMPATIBLE. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg UR (GaAsP/ GaP) 5 30 160 75 UG (GaP) 5 25 140 62.5 Unit V mA mA mW Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) Luminous Intensity (IF=20mA) mcd min. typ. 59 49 VF VF UR (GaAsP/ GaP) 2.0 2.5 UG (GaP) 2.2 2.5 Unit V V IR 10 10 uA -40 ~ +85 -40 ~ +85 260°C For 3 Seconds 260°C For 5 Seconds °C λP 627 565 nm λD 625 568 nm Δλ 45 30 nm C 15 15 pF Part Number Emitting Color Emitting Material Lens-color Wavelength nm λP Viewing Angle 2 θ 1/2 LUGR59M Red Green GaAsP/GaP GaP White Diffused 18 18 627 565 60° Published Date : MAR 19,2008 Drawing No :SDSA1197 V5 Checked : B.L.LIU P.1/5 Part Number : LUGR59M www.SunLED.com T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP UR Published Date : MAR 19,2008 Drawing No :SDSA1197 V5 Checked : B.L.LIU P.2/5 Part Number : LUGR59M www.SunLED.com T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP UG Published Date : MAR 19,2008 Drawing No :SDSA1197 V5 Checked : B.L.LIU P.3/5 Part Number : LUGR59M www.SunLED.com T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 19,2008 Drawing No :SDSA1197 V5 Checked : B.L.LIU P.4/5 Part Number : LUGR59M www.SunLED.com T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS LUGR59M Published Date : MAR 19,2008 Drawing No :SDSA1197 V5 Checked : B.L.LIU P.5/5