LUGY29M

Part Number: LUGY29M www.SunLED.com T -1(3mm) BI-COLOR INDICATOR LAMP F eatures U NIFORM LIGHT OUTPUT. L OW POWER CONSUMPTION. 3 L EADS WITH ONE COMMON LEAD. I .C. COMPATIBLE. L ONG LIFE - SOLID STATE RELIABILITY. R oHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg UG (GaP) 5 25 140 62.5 -40 ~ +85 -40 ~ +85 260°C For 3 Seconds 260°C For 5 Seconds UY (GaAsP/ GaP) 5 30 140 75 Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR UY (GaAsP/ Unit GaP) 2.1 2.5 10 V V uA Unit V mA mA mW °C UG (GaP) 2.2 2.5 10 λP 565 590 nm λD 568 588 nm Δλ 30 35 nm C 15 20 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 34 14 Wavelength nm λP Viewing Angle 2 θ 1/2 LUGY29M Green Yellow GaP GaAsP/GaP White Diffused 10 7 565 590 60° Published Date : MAR 27, 2008 Drawing No : SDSA3142 V3 Checked : B.L.LIU P.1/5 Part Number: LUGY29M www.SunLED.com T -1(3mm) BI-COLOR INDICATOR LAMP UG Published Date : MAR 27, 2008 Drawing No : SDSA3142 V3 Checked : B.L.LIU P.2/5 Part Number: LUGY29M www.SunLED.com T -1(3mm) BI-COLOR INDICATOR LAMP UY Published Date : MAR 27, 2008 Drawing No : SDSA3142 V3 Checked : B.L.LIU P.3/5 Part Number: LUGY29M www.SunLED.com T -1(3mm) BI-COLOR INDICATOR LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 27, 2008 Drawing No : SDSA3142 V3 Checked : B.L.LIU P.4/5 Part Number: LUGY29M www.SunLED.com T -1(3mm) BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS LUGY29M R. CHEN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC 專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.28 07:41:56 +08'00' Published Date : MAR 27, 2008 Drawing No : SDSA3142 V3 Checked : B.L.LIU P.5/5