LUGY37M

Part Number: LUGY37M www.SunLED.com T-1 (3mm) BI-COLOR INDICATOR LAMP Features UNIFORM LIGHT OUTPUT. LOW POWER CONSUMPTION. I.C. COMPATIBLE. R.CHEN 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn.kingbright. com, c= 日期︰2008.03.22 07:46:40 +08'00' LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. UY (GaAsP/ GaP) 30 140 75 Operating Characteristics (TA=25°C) Unit mA mA mW °C Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF UG (GaP) 2.2 2.5 UY (GaAsP/ Unit GaP) 2.1 2.5 V V Absolute Maximum Ratings (TA=25°C) Forward Current Forward Current (Peak) 1/10Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] IF iFS PT TA Tstg UG (GaP) 25 140 62.5 λP 565 590 nm -40 ~ +85 -40 ~ +85 260°C For 3 Seconds 260°C For 5 Seconds λD 568 588 nm Δλ 30 35 nm C 15 20 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 15 6 Wavelength nm λP Viewing Angle 2 θ 1/2 Green LUGY37M Yellow Published Date : MAR 21, 2008 GaP White Diffused GaAsP/GaP Drawing No : SDSA3152 V4 7 1.6 565 590 60° Checked : B.L.LIU P.1/5 Part Number: LUGY37M www.SunLED.com T-1 (3mm) BI-COLOR INDICATOR LAMP UG Published Date : MAR 21, 2008 Drawing No : SDSA3152 V4 Checked : B.L.LIU P.2/5 Part Number: LUGY37M www.SunLED.com T-1 (3mm) BI-COLOR INDICATOR LAMP UY Published Date : MAR 21, 2008 Drawing No : SDSA3152 V4 Checked : B.L.LIU P.3/5 Part Number: LUGY37M www.SunLED.com T-1 (3mm) BI-COLOR INDICATOR LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 21, 2008 Drawing No : SDSA3152 V4 Checked : B.L.LIU P.4/5 Part Number: LUGY37M www.SunLED.com T-1 (3mm) BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS LUGY37M Published Date : MAR 21, 2008 Drawing No : SDSA3152 V4 Checked : B.L.LIU P.5/5