Part Number:
LUGY92M
www.SunLED.com
T-1(3mm) BI-COLOR INDICATOR LAMP
Features
UNIFORM LIGHT OUTPUT. LOW POWER CONSUMPTION.
R. CHE N
數位簽署者:R. CHEN DN:cn=R.CHEN, o=SPEC專用, ou=SPEC專用, email=fangdh@cn .kingbright.com, c= 日期︰2008.03.24 07:56:53 +08'00'
3 LEADS WITH ONE COMMON LEAD. I.C. COMPATIBLE. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg UG (GaP) 5 25 140 62.5 UY (GaAsP /GaP) 5 30 140 75 Operating Characteristics (TA=25°C) Unit V mA mA mW °C Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR UG (GaP) 2.2 2.5 10 UY (GaAsP/ Unit GaP) 2.1 2.5 10 V V uA
λP
565
590
nm
-40 ~ +85 -40 ~ +85 260°C For 3 Seconds 260°C For 5 Seconds
λD
568
588
nm
Δλ
30
35
nm
C
15
20
pF
Part Number
Emitting Color
Emitting Material
Lens-color
Luminous Intensity (IF=20mA) mcd min. typ. 29 14
Wavelength nm λP
Viewing Angle 2 θ 1/2
LUGY92M
Green Yellow
GaP GaAsP/GaP
White Diffused
10 7
565 590
60°
Published Date : MAR 22, 2008
Drawing No : SDSA3154
V3
Checked : B.L.LIU
P.1/5
Part Number:
LUGY92M
www.SunLED.com
T-1(3mm) BI-COLOR INDICATOR LAMP
UG
Published Date : MAR 22, 2008
Drawing No : SDSA3154
V3
Checked : B.L.LIU
P.2/5
Part Number:
LUGY92M
www.SunLED.com
T-1(3mm) BI-COLOR INDICATOR LAMP
UY
Published Date : MAR 22, 2008
Drawing No : SDSA3154
V3
Checked : B.L.LIU
P.3/5
Part Number:
LUGY92M
www.SunLED.com
T-1(3mm) BI-COLOR INDICATOR LAMP
Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 22, 2008
Drawing No : SDSA3154
V3
Checked : B.L.LIU
P.4/5
Part Number:
LUGY92M
www.SunLED.com
T-1(3mm) BI-COLOR INDICATOR LAMP
PACKING & LABEL SPECIFICATIONS
LUGY92M
Published Date : MAR 22, 2008
Drawing No : SDSA3154
V3
Checked : B.L.LIU
P.5/5
很抱歉,暂时无法提供与“LUGY92M”相匹配的价格&库存,您可以联系我们找货
免费人工找货