SBBEMDBG99W

Part Number: SBBEMDBG99W www.SunLED.com 5.0X6.0mm FULL COLOR LED LAMP Features OUTSTANDING MATERIAL EFFICIENCY. RELIABLE AND RUGGED. WATER CLEAR LENS. LOW POWER CONSUMPTION. ONE BLUE , ONE ORANGE AND ONE GREEN CHIPS IN ONE PACKAGE. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg 1000 MD BB-E BG (InGaA Unit (InGaN) (InGaN) lP) 5 30 160 5 50 185 350 -40 ~ +85 -40 ~ +85 — 1000 5 30 150 V mA mA mW °C Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) MD BB-E BG Unit (InGaA (InGaN) (InGaN) lP) VF VF IR λP 3.7 4.3 10 1.9 2.5 10 3.5 4.5 10 V V uA 465 640 520 nm Electrostatic Discharge Threshold (HBM) Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] V λD 470 628 525 nm 260°C For 3 Seconds 260°C For 5 Seconds ∆λ C 25 27 38 nm 110 45 45 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=30mA *50mA) mcd min. typ. 248 *497 347 Wavelength nm λP Viewing Angle 2 θ 1/2 Blue SBBEMDBG99W Red Green InGaN InGaAlP InGaN Water Clear 110 *380 180 465 640 520 100° Note: * Luminous intensity with asterisk is measured at 50mA. Published Date : APR 28, 2006 Drawing No : SDSA1502 V5 Checked : B.L.LIU P.1/5 Part Number: SBBEMDBG99W www.SunLED.com 5.0X6.0mm FULL COLOR LED LAMP BB-E Published Date : APR 28, 2006 Drawing No : SDSA1502 V5 Checked : B.L.LIU P.2/5 Part Number: SBBEMDBG99W www.SunLED.com 5.0X6.0mm FULL COLOR LED LAMP MD Published Date : APR 28, 2006 Drawing No : SDSA1502 V5 Checked : B.L.LIU P.3/5 Part Number: SBBEMDBG99W www.SunLED.com 5.0X6.0mm FULL COLOR LED LAMP BG Published Date : APR 28, 2006 Drawing No : SDSA1502 V5 Checked : B.L.LIU P.4/5 Part Number: SBBEMDBG99W www.SunLED.com 5.0X6.0mm FULL COLOR LED LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : APR 28, 2006 Drawing No : SDSA1502 V5 Checked : B.L.LIU P.5/5